[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161125131201.19994-1-martin.blumenstingl@googlemail.com>
Date: Fri, 25 Nov 2016 14:11:59 +0100
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: f.fainelli@...il.com, robh+dt@...nel.org, mark.rutland@....com,
davem@...emloft.net, sean.wang@...iatek.com,
netdev@...r.kernel.org, devicetree@...r.kernel.org
Cc: linux-amlogic@...ts.infradead.org, jbrunet@...libre.com,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH 0/2] net: phy: realtek: fix RTL8211F TX-delay handling
The RTL8211F PHY driver currently enables the TX-delay only when the
phy-mode is PHY_INTERFACE_MODE_RGMII. This is incorrect, because there
are three RGMII variations of the phy-mode which explicitly request the
PHY to enable the RX and/or TX delay, while PHY_INTERFACE_MODE_RGMII
specifies that the PHY should disable the RX and/or TX delays.
Additionally to the RTL8211F PHY driver change this contains a small
update to the phy-mode documentation to clarify the purpose of the
RGMII phy-modes.
While this may not be perfect yet it's at least a start. Please feel
free to drop this patch from this series and send an improved version
yourself.
These patches are the results of recent discussions, see [0]
[0] http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001688.html
Martin Blumenstingl (2):
Documentation: devicetree: clarify usage of the RGMII phy-modes
net: phy: realtek: fix enabling of the TX-delay for RTL8211F
Documentation/devicetree/bindings/net/ethernet.txt | 24 ++++++++++++++++++----
drivers/net/phy/realtek.c | 20 ++++++++++--------
2 files changed, 32 insertions(+), 12 deletions(-)
--
2.10.2
Powered by blists - more mailing lists