[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161127060133.10357-3-f.fainelli@gmail.com>
Date: Sat, 26 Nov 2016 22:01:31 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, andrew@...n.ch, sf84@...oste.net,
martin.blumenstingl@...glemail.com, mans@...sr.com,
alexandre.torgue@...com, peppe.cavallaro@...com,
timur@...eaurora.org, jbrunet@...libre.com,
Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next 2/4] Documentation: net: phy: Add a paragraph about pause frames/flow control
Describe that the Ethernet MAC controller is ultimately responsible for
dealing with proper pause frames/flow control advertisement and
enabling, and that it is therefore allowed to have it change
phydev->supported/advertising with SUPPORTED_Pause and
SUPPORTED_AsymPause.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
Documentation/networking/phy.txt | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt
index 4b25c0f24201..9a42a9414cea 100644
--- a/Documentation/networking/phy.txt
+++ b/Documentation/networking/phy.txt
@@ -127,8 +127,9 @@ Letting the PHY Abstraction Layer do Everything
values pruned from them which don't make sense for your controller (a 10/100
controller may be connected to a gigabit capable PHY, so you would need to
mask off SUPPORTED_1000baseT*). See include/linux/ethtool.h for definitions
- for these bitfields. Note that you should not SET any bits, or the PHY may
- get put into an unsupported state.
+ for these bitfields. Note that you should not SET any bits, except the
+ SUPPORTED_Pause and SUPPORTED_AsymPause bits (see below), or the PHY may get
+ put into an unsupported state.
Lastly, once the controller is ready to handle network traffic, you call
phy_start(phydev). This tells the PAL that you are ready, and configures the
@@ -139,6 +140,19 @@ Letting the PHY Abstraction Layer do Everything
When you want to disconnect from the network (even if just briefly), you call
phy_stop(phydev).
+Pause frames / flow control
+
+ The PHY does not participate directly in flow control/pause frames except by
+ making sure that the SUPPORTED_Pause and SUPPORTED_AsymPause bits are set in
+ MII_ADVERTISE to indicate towards the link partner that the Ethernet MAC
+ controller supports such a thing. Since flow control/pause frames generation
+ involves the Ethernet MAC driver, it is recommended that this driver takes care
+ of properly indicating advertisement and support for such features by setting
+ the SUPPORTED_Pause and SUPPORTED_AsymPause bits accordingly. This can be done
+ either before or after phy_connect() and/or as a result of implementing the
+ ethtool::set_pauseparam feature.
+
+
Keeping Close Tabs on the PAL
It is possible that the PAL's built-in state machine needs a little help to
--
2.9.3
Powered by blists - more mailing lists