[<prev] [next>] [day] [month] [year] [list]
Message-ID: <1480339411-5768-1-git-send-email-allan.nielsen@microsemi.com>
Date: Mon, 28 Nov 2016 14:23:31 +0100
From: "Allan W. Nielsen" <allan.nielsen@...rosemi.com>
To: <netdev@...r.kernel.org>
CC: <andrew@...n.ch>, <f.fainelli@...il.com>,
<raju.lakkaraju@...rosemi.com>, <allan.nielsen@...rosemi.com>
Subject: [PATCH net-next 0/3] Adding PHY Loopback tunable
Hi All,
This series add support for PHY Loopback tunable, and implement it
for MSCC phys.
To configure loopback, the ethtool_tunable structure is used. 'id' must be
set to 'ETHTOOL_PHY_LOOPBACK' and 'data' specifies the loopback type:
ETHTOOL_PHY_LOOPBACK_* (DISABLE, NEAR, FAR or EXTN).
Here is how to configure loopback using ethtool:
Ethtool Help: ethtool -h for PHY tunables
ethtool --set-phy-tunable DEVNAME Set PHY tunable
[ loopback off|near|far|extn ]
ethtool --get-phy-tunable DEVNAME Get PHY tunable
[ loopback ]
Ethtool ex:
ethtool --set-phy-tunable eth0 loopback near
ethtool --set-phy-tunable eth0 loopback far
ethtool --set-phy-tunable eth0 loopback extn
ethtool --set-phy-tunable eth0 loopback off
ethtool --get-phy-tunable eth0 loopback
Patches to ethtool will follow shortly.
The feature is tested on Beaglebone Black with VSC 8531 PHY.
Please review.
Best regards
Allan and Raju
Raju Lakkaraju (3):
ethtool: (uapi) Add ETHTOOL_PHY_LOOPBACK to PHY tunables
ethtool: Core impl for ETHTOOL_PHY_LOOPBACK tunable.
net: phy: Add Loopback support in Microsemi PHYs driver
drivers/net/phy/mscc.c | 118 +++++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/ethtool.h | 8 +++
net/core/ethtool.c | 2 +
3 files changed, 128 insertions(+)
--
2.7.3
Powered by blists - more mailing lists