| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1480308702-6261-4-git-send-email-rvatsavayi@caviumnetworks.com>
Date: Sun, 27 Nov 2016 20:51:36 -0800
From: Raghu Vatsavayi <rvatsavayi@...iumnetworks.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>,
Raghu Vatsavayi <rvatsavayi@...iumnetworks.com>,
Raghu Vatsavayi <raghu.vatsavayi@...iumnetworks.com>,
Derek Chickles <derek.chickles@...iumnetworks.com>,
Satanand Burla <satananda.burla@...iumnetworks.com>,
Felix Manlunas <felix.manlunas@...iumnetworks.com>
Subject: [PATCH net-next 3/9] liquidio CN23XX: VF config setup
Adds support for setting up VF configuration.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@...iumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@...iumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@...iumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@...iumnetworks.com>
---
drivers/net/ethernet/cavium/liquidio/Makefile | 1 +
.../ethernet/cavium/liquidio/cn23xx_vf_device.c | 44 +++++++
.../ethernet/cavium/liquidio/cn23xx_vf_device.h | 2 +
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 136 +++++++++++++++++++++
.../net/ethernet/cavium/liquidio/octeon_device.c | 3 +
5 files changed, 186 insertions(+)
create mode 100644 drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c
diff --git a/drivers/net/ethernet/cavium/liquidio/Makefile b/drivers/net/ethernet/cavium/liquidio/Makefile
index 69d23fc..cca903a 100644
--- a/drivers/net/ethernet/cavium/liquidio/Makefile
+++ b/drivers/net/ethernet/cavium/liquidio/Makefile
@@ -31,6 +31,7 @@ liquidio_vf-$(CONFIG_LIQUIDIO_VF) += lio_ethtool.o \
cn66xx_device.o \
cn68xx_device.o \
cn23xx_pf_device.o \
+ cn23xx_vf_device.o \
octeon_mailbox.o \
octeon_mem_ops.o \
octeon_droq.o \
diff --git a/drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c b/drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c
new file mode 100644
index 0000000..d683bda
--- /dev/null
+++ b/drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c
@@ -0,0 +1,44 @@
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@...ium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2016 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more details.
+ ***********************************************************************/
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "cn23xx_vf_device.h"
+#include "octeon_main.h"
+
+int cn23xx_setup_octeon_vf_device(struct octeon_device *oct)
+{
+ struct octeon_cn23xx_vf *cn23xx = (struct octeon_cn23xx_vf *)oct->chip;
+
+ if (octeon_map_pci_barx(oct, 0, 0))
+ return 1;
+
+ cn23xx->conf = oct_get_config_info(oct, LIO_23XX);
+ if (!cn23xx->conf) {
+ dev_err(&oct->pci_dev->dev, "%s No Config found for CN23XX\n",
+ __func__);
+ octeon_unmap_pci_barx(oct, 0);
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.h b/drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.h
index 015b6d4..9e4fb50 100644
--- a/drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.h
+++ b/drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.h
@@ -31,4 +31,6 @@
struct octeon_cn23xx_vf {
struct octeon_config *conf;
};
+
+int cn23xx_setup_octeon_vf_device(struct octeon_device *oct);
#endif
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
index d1b1a24..721ee66 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
@@ -22,6 +22,8 @@
#include "octeon_iq.h"
#include "response_manager.h"
#include "octeon_device.h"
+#include "octeon_main.h"
+#include "cn23xx_vf_device.h"
MODULE_AUTHOR("Cavium Networks, <support@...ium.com>");
MODULE_DESCRIPTION("Cavium LiquidIO Intelligent Server Adapter Virtual Function Driver");
@@ -37,6 +39,7 @@ struct octeon_device_priv {
static int
liquidio_vf_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
static void liquidio_vf_remove(struct pci_dev *pdev);
+static int octeon_device_init(struct octeon_device *oct);
static const struct pci_device_id liquidio_vf_pci_tbl[] = {
{
@@ -84,10 +87,78 @@ struct octeon_device_priv {
/* set linux specific device pointer */
oct_dev->pci_dev = (void *)pdev;
+ if (octeon_device_init(oct_dev)) {
+ liquidio_vf_remove(pdev);
+ return -ENOMEM;
+ }
+
+ dev_dbg(&oct_dev->pci_dev->dev, "Device is ready\n");
+
return 0;
}
/**
+ * \brief PCI FLR for each Octeon device.
+ * @param oct octeon device
+ */
+static void octeon_pci_flr(struct octeon_device *oct)
+{
+ u16 status;
+
+ pci_save_state(oct->pci_dev);
+
+ pci_cfg_access_lock(oct->pci_dev);
+
+ /* Quiesce the device completely */
+ pci_write_config_word(oct->pci_dev, PCI_COMMAND,
+ PCI_COMMAND_INTX_DISABLE);
+
+ /* Wait for Transaction Pending bit clean */
+ msleep(100);
+ pcie_capability_read_word(oct->pci_dev, PCI_EXP_DEVSTA, &status);
+ if (status & PCI_EXP_DEVSTA_TRPND) {
+ dev_info(&oct->pci_dev->dev, "Function reset incomplete after 100ms, sleeping for 5 seconds\n");
+ ssleep(5);
+ pcie_capability_read_word(oct->pci_dev, PCI_EXP_DEVSTA,
+ &status);
+ if (status & PCI_EXP_DEVSTA_TRPND)
+ dev_info(&oct->pci_dev->dev, "Function reset still incomplete after 5s, reset anyway\n");
+ }
+ pcie_capability_set_word(oct->pci_dev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_BCR_FLR);
+ mdelay(100);
+
+ pci_cfg_access_unlock(oct->pci_dev);
+
+ pci_restore_state(oct->pci_dev);
+}
+
+/**
+ *\brief Destroy resources associated with octeon device
+ * @param pdev PCI device structure
+ * @param ent unused
+ */
+static void octeon_destroy_resources(struct octeon_device *oct)
+{
+ switch (atomic_read(&oct->status)) {
+ case OCT_DEV_PCI_MAP_DONE:
+ octeon_unmap_pci_barx(oct, 0);
+ octeon_unmap_pci_barx(oct, 1);
+
+ /* fallthrough */
+ case OCT_DEV_PCI_ENABLE_DONE:
+ pci_clear_master(oct->pci_dev);
+ /* Disable the device, releasing the PCI INT */
+ pci_disable_device(oct->pci_dev);
+
+ /* fallthrough */
+ case OCT_DEV_BEGIN_STATE:
+ /* Nothing to be done here either */
+ break;
+ }
+}
+
+/**
* \brief Cleans up resources at unload time
* @param pdev PCI device structure
*/
@@ -97,12 +168,77 @@ static void liquidio_vf_remove(struct pci_dev *pdev)
dev_dbg(&oct_dev->pci_dev->dev, "Stopping device\n");
+ /* Reset the octeon device and cleanup all memory allocated for
+ * the octeon device by driver.
+ */
+ octeon_destroy_resources(oct_dev);
+
+ dev_info(&oct_dev->pci_dev->dev, "Device removed\n");
+
/* This octeon device has been removed. Update the global
* data structure to reflect this. Free the device structure.
*/
octeon_free_device_mem(oct_dev);
}
+/**
+ * \brief PCI initialization for each Octeon device.
+ * @param oct octeon device
+ */
+static int octeon_pci_os_setup(struct octeon_device *oct)
+{
+#ifdef CONFIG_PCI_IOV
+ /* setup PCI stuff first */
+ if (!oct->pci_dev->physfn)
+ octeon_pci_flr(oct);
+#endif
+
+ if (pci_enable_device(oct->pci_dev)) {
+ dev_err(&oct->pci_dev->dev, "pci_enable_device failed\n");
+ return 1;
+ }
+
+ if (dma_set_mask_and_coherent(&oct->pci_dev->dev, DMA_BIT_MASK(64))) {
+ dev_err(&oct->pci_dev->dev, "Unexpected DMA device capability\n");
+ pci_disable_device(oct->pci_dev);
+ return 1;
+ }
+
+ /* Enable PCI DMA Master. */
+ pci_set_master(oct->pci_dev);
+
+ return 0;
+}
+
+/**
+ * \brief Device initialization for each Octeon device that is probed
+ * @param octeon_dev octeon device
+ */
+static int octeon_device_init(struct octeon_device *oct)
+{
+ u32 rev_id;
+
+ atomic_set(&oct->status, OCT_DEV_BEGIN_STATE);
+
+ /* Enable access to the octeon device and make its DMA capability
+ * known to the OS.
+ */
+ if (octeon_pci_os_setup(oct))
+ return 1;
+ atomic_set(&oct->status, OCT_DEV_PCI_ENABLE_DONE);
+
+ oct->chip_id = OCTEON_CN23XX_VF_VID;
+ pci_read_config_dword(oct->pci_dev, 8, &rev_id);
+ oct->rev_id = rev_id & 0xff;
+
+ if (cn23xx_setup_octeon_vf_device(oct))
+ return 1;
+
+ atomic_set(&oct->status, OCT_DEV_PCI_MAP_DONE);
+
+ return 0;
+}
+
static int __init liquidio_vf_init(void)
{
octeon_init_device_list(0);
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_device.c b/drivers/net/ethernet/cavium/liquidio/octeon_device.c
index 05bb0fd..b4c8ee4 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_device.c
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_device.c
@@ -581,6 +581,8 @@ static void *__retrieve_octeon_config_info(struct octeon_device *oct,
ret = (void *)&default_cn68xx_conf;
} else if (oct->chip_id == OCTEON_CN23XX_PF_VID) {
ret = (void *)&default_cn23xx_conf;
+ } else if (oct->chip_id == OCTEON_CN23XX_VF_VID) {
+ ret = (void *)&default_cn23xx_conf;
}
break;
default:
@@ -596,6 +598,7 @@ static int __verify_octeon_config_info(struct octeon_device *oct, void *conf)
case OCTEON_CN68XX:
return lio_validate_cn6xxx_config_info(oct, conf);
case OCTEON_CN23XX_PF_VID:
+ case OCTEON_CN23XX_VF_VID:
return 0;
default:
break;
--
1.8.3.1
Powered by blists - more mailing lists