netdev - RE: [PATCH net-netx] net: lan78xx: add LAN7801 MAC-only support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <9235D6609DB808459E95D78E17F2E43D409700F2@CHN-SV-EXMX02.mchp-main.com>
Date:   Tue, 29 Nov 2016 23:55:59 +0000
From:   <Woojung.Huh@...rochip.com>
To:     <f.fainelli@...il.com>, <davem@...emloft.net>, <andrew@...n.ch>
CC:     <netdev@...r.kernel.org>, <UNGLinuxDriver@...rochip.com>
Subject: RE: [PATCH net-netx] net: lan78xx: add LAN7801 MAC-only support

> There are two ways to get these settings propagated to the PHY driver:
> 
> - using a board fixup which is going to be invoked during
> drv->config_init() time
> 
> - specifying a phydev->dev_flags and reading it from the PHY driver to
> act upon and configure the PHY based on that value, there are only
> 32-bits available though, and you need to make sure they are not
> conflicting with other potential users in tree
> 
> My preference would go with 1, since you could just register it in your
> PHY driver and re-use the code you are proposing to include here.

Florian,

It seems phy_unregister_fixup() will be needed for module network driver.
phy_fixup_list keeps the list even after unloading module.
Do you know any update is waiting for submission? If not, I'll make patch.

Thanks.
Woojung