[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161130225930.25510-2-vivien.didelot@savoirfairelinux.com>
Date: Wed, 30 Nov 2016 17:59:25 -0500
From: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, kernel@...oirfairelinux.com,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: [PATCH net-next 1/6] net: dsa: mv88e6xxx: add helper to disable ports
Before resetting a switch, the ports should be set to the Disabled state
and the transmit queues should be drained.
Add an helper to explicit that.
Signed-off-by: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
---
drivers/net/dsa/mv88e6xxx/chip.c | 34 +++++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index ce2f7ff..c89701e 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2361,6 +2361,26 @@ static void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port)
mutex_unlock(&chip->reg_lock);
}
+static int mv88e6xxx_disable_ports(struct mv88e6xxx_chip *chip)
+{
+ int i, err;
+
+ /* Set all ports to the Disabled state */
+ for (i = 0; i < mv88e6xxx_num_ports(chip); i++) {
+ err = mv88e6xxx_port_set_state(chip, i,
+ PORT_CONTROL_STATE_DISABLED);
+ if (err)
+ return err;
+ }
+
+ /* Wait for transmit queues to drain,
+ * i.e. 2ms for a maximum frame to be transmitted at 10 Mbps.
+ */
+ usleep_range(2000, 4000);
+
+ return 0;
+}
+
static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip)
{
bool ppu_active = mv88e6xxx_has(chip, MV88E6XXX_FLAG_PPU_ACTIVE);
@@ -2369,18 +2389,10 @@ static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip)
unsigned long timeout;
u16 reg;
int err;
- int i;
- /* Set all ports to the disabled state. */
- for (i = 0; i < mv88e6xxx_num_ports(chip); i++) {
- err = mv88e6xxx_port_set_state(chip, i,
- PORT_CONTROL_STATE_DISABLED);
- if (err)
- return err;
- }
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 4000);
+ err = mv88e6xxx_disable_ports(chip);
+ if (err)
+ return err;
/* If there is a gpio connected to the reset pin, toggle it */
if (gpiod) {
--
2.10.2
Powered by blists - more mailing lists