[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7a484f9c-a47d-3ccd-9611-d00b86feabdd@ti.com>
Date: Mon, 5 Dec 2016 12:25:57 -0600
From: Grygorii Strashko <grygorii.strashko@...com>
To: Rob Herring <robh@...nel.org>
CC: "David S. Miller" <davem@...emloft.net>, <netdev@...r.kernel.org>,
Mugunthan V N <mugunthanvnm@...com>,
Richard Cochran <richardcochran@...il.com>,
Sekhar Nori <nsekhar@...com>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>, <devicetree@...r.kernel.org>,
Murali Karicheri <m-karicheri2@...com>,
Wingman Kwok <w-kwok2@...com>
Subject: Re: [PATCH 1/6] net: ethernet: ti: netcp: add support of cpts
On 12/05/2016 08:49 AM, Rob Herring wrote:
> On Mon, Nov 28, 2016 at 05:04:23PM -0600, Grygorii Strashko wrote:
>> From: WingMan Kwok <w-kwok2@...com>
>>
>> This patch adds support of the cpts device found in the
>> gbe and 10gbe ethernet switches on the keystone 2 SoCs
>> (66AK2E/L/Hx, 66AK2Gx).
>>
>> Signed-off-by: WingMan Kwok <w-kwok2@...com>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
>> ---
>> .../devicetree/bindings/net/keystone-netcp.txt | 9 +
>> drivers/net/ethernet/ti/Kconfig | 7 +-
>> drivers/net/ethernet/ti/netcp.h | 2 +-
>> drivers/net/ethernet/ti/netcp_core.c | 18 +-
>> drivers/net/ethernet/ti/netcp_ethss.c | 437 ++++++++++++++++++++-
>> 5 files changed, 459 insertions(+), 14 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt
>> index 04ba1dc..c37b54e 100644
>> --- a/Documentation/devicetree/bindings/net/keystone-netcp.txt
>> +++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt
>> @@ -113,6 +113,15 @@ Optional properties:
>> will only initialize these ports and attach PHY
>> driver to them if needed.
>>
>> + Properties related to cpts configurations.
>> + - cpts_clock_mult/cpts_clock_shift:
>
> Needs vendor prefix. Don't use '_'.
This module is used as part of OMAP and Keystone SoCs, so names for
this props is ABI already :(
>
>> + used for converting time counter cycles to ns as in
>> +
>> + ns = (cycles * clock_mult) >> _shift
>> +
>> + Defaults: clock_mult, clock_shift = calculated from
>> + CPTS refclk
>
> What does this mean?
>
I'll add more description here.
>> +
>> NetCP interface properties: Interface specification for NetCP sub-modules.
>> Required properties:
>> - rx-channel: the navigator packet dma channel name for rx.
--
regards,
-grygorii
Powered by blists - more mailing lists