| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9235D6609DB808459E95D78E17F2E43D409799B1@CHN-SV-EXMX02.mchp-main.com>
Date: Wed, 7 Dec 2016 20:26:25 +0000
From: <Woojung.Huh@...rochip.com>
To: <davem@...emloft.net>, <f.fainelli@...il.com>
CC: <andrew@...n.ch>, <netdev@...r.kernel.org>,
<UNGLinuxDriver@...rochip.com>
Subject: [PATCH v2 net-next 2/2] lan78xx: add LAN7801 MAC only support
From: Woojung Huh <woojung.huh@...rochip.com>
Add LAN7801 MAC only support with phy fixup functions.
Signed-off-by: Woojung Huh <woojung.huh@...rochip.com>
---
drivers/net/usb/Kconfig | 5 +++
drivers/net/usb/lan78xx.c | 109 +++++++++++++++++++++++++++++++++++++++++++++-
drivers/net/usb/lan78xx.h | 14 ++++++
3 files changed, 126 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index cdde590..3dd490f5 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -114,6 +114,11 @@ config USB_LAN78XX
help
This option adds support for Microchip LAN78XX based USB 2
& USB 3 10/100/1000 Ethernet adapters.
+ LAN7800 : USB 3 to 10/100/1000 Ethernet adapter
+ LAN7850 : USB 2 to 10/100/1000 Ethernet adapter
+ LAN7801 : USB 3 to 10/100/1000 Ethernet adapter (MAC only)
+
+ Proper PHY driver is required for LAN7801.
To compile this driver as a module, choose M here: the
module will be called lan78xx.
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 019f758..08f8703 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -40,7 +40,7 @@
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@...rochip.com>"
#define DRIVER_DESC "LAN78XX USB 3.0 Gigabit Ethernet Devices"
#define DRIVER_NAME "lan78xx"
-#define DRIVER_VERSION "1.0.5"
+#define DRIVER_VERSION "1.0.6"
#define TX_TIMEOUT_JIFFIES (5 * HZ)
#define THROTTLE_JIFFIES (HZ / 8)
@@ -67,6 +67,7 @@
#define LAN78XX_USB_VENDOR_ID (0x0424)
#define LAN7800_USB_PRODUCT_ID (0x7800)
#define LAN7850_USB_PRODUCT_ID (0x7850)
+#define LAN7801_USB_PRODUCT_ID (0x7801)
#define LAN78XX_EEPROM_MAGIC (0x78A5)
#define LAN78XX_OTP_MAGIC (0x78F3)
@@ -390,6 +391,7 @@ struct lan78xx_net {
u32 chipid;
u32 chiprev;
struct mii_bus *mdiobus;
+ phy_interface_t interface;
int fc_autoneg;
u8 fc_request_control;
@@ -400,6 +402,10 @@ struct lan78xx_net {
struct irq_domain_data domain_data;
};
+/* define external phy id */
+#define PHY_LAN8835 (0x0007C130)
+#define PHY_KSZ9031RNX (0x00221620)
+
/* use ethtool to change the level for any given device */
static int msg_level = -1;
module_param(msg_level, int, 0);
@@ -1697,6 +1703,7 @@ static int lan78xx_mdiobus_read(struct mii_bus *bus, int phy_id, int idx)
done:
mutex_unlock(&dev->phy_mutex);
usb_autopm_put_interface(dev->intf);
+
return ret;
}
@@ -1759,6 +1766,10 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev)
/* set to internal PHY id */
dev->mdiobus->phy_mask = ~(1 << 1);
break;
+ case ID_REV_CHIP_ID_7801_:
+ /* scan thru PHYAD[2..0] */
+ dev->mdiobus->phy_mask = ~(0xFF);
+ break;
}
ret = mdiobus_register(dev->mdiobus);
@@ -1933,6 +1944,47 @@ static void lan78xx_remove_irq_domain(struct lan78xx_net *dev)
dev->domain_data.irqdomain = NULL;
}
+static int lan8835_fixup(struct phy_device *phydev)
+{
+ int buf;
+ int ret;
+ struct lan78xx_net *dev = netdev_priv(phydev->attached_dev);
+
+ /* LED2/PME_N/IRQ_N/RGMII_ID pin to IRQ_N mode */
+ buf = phy_read_mmd_indirect(phydev, 0x8010, 3);
+ buf &= ~0x1800;
+ buf |= 0x0800;
+ phy_write_mmd_indirect(phydev, 0x8010, 3, buf);
+
+ /* RGMII MAC TXC Delay Enable */
+ ret = lan78xx_write_reg(dev, MAC_RGMII_ID,
+ MAC_RGMII_ID_TXC_DELAY_EN_);
+
+ /* RGMII TX DLL Tune Adjust */
+ ret = lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
+
+ dev->interface = PHY_INTERFACE_MODE_RGMII_TXID;
+
+ return 1;
+}
+
+static int ksz9031rnx_fixup(struct phy_device *phydev)
+{
+ struct lan78xx_net *dev = netdev_priv(phydev->attached_dev);
+
+ /* Micrel9301RNX PHY configuration */
+ /* RGMII Control Signal Pad Skew */
+ phy_write_mmd_indirect(phydev, 4, 2, 0x0077);
+ /* RGMII RX Data Pad Skew */
+ phy_write_mmd_indirect(phydev, 5, 2, 0x7777);
+ /* RGMII RX Clock Pad Skew */
+ phy_write_mmd_indirect(phydev, 8, 2, 0x1FF);
+
+ dev->interface = PHY_INTERFACE_MODE_RGMII_RXID;
+
+ return 1;
+}
+
static int lan78xx_phy_init(struct lan78xx_net *dev)
{
int ret;
@@ -1945,6 +1997,42 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
return -EIO;
}
+ if ((dev->chipid == ID_REV_CHIP_ID_7800_) ||
+ (dev->chipid == ID_REV_CHIP_ID_7850_)) {
+ phydev->is_internal = true;
+ dev->interface = PHY_INTERFACE_MODE_GMII;
+
+ } else if (dev->chipid == ID_REV_CHIP_ID_7801_) {
+ if (!phydev->drv) {
+ netdev_err(dev->net, "no PHY driver found\n");
+ return -EIO;
+ }
+
+ dev->interface = PHY_INTERFACE_MODE_RGMII;
+
+ /* external PHY fixup for KSZ9031RNX */
+ ret = phy_register_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0,
+ ksz9031rnx_fixup);
+ if (ret < 0) {
+ netdev_err(dev->net, "fail to register fixup\n");
+ return ret;
+ }
+ /* external PHY fixup for LAN8835 */
+ ret = phy_register_fixup_for_uid(PHY_LAN8835, 0xfffffff0,
+ lan8835_fixup);
+ if (ret < 0) {
+ netdev_err(dev->net, "fail to register fixup\n");
+ return ret;
+ }
+ /* add more external PHY fixup here if needed */
+
+ phydev->is_internal = false;
+ } else {
+ netdev_err(dev->net, "unknown ID found\n");
+ ret = -EIO;
+ goto error;
+ }
+
/* if phyirq is not set, use polling mode in phylib */
if (dev->domain_data.phyirq > 0)
phydev->irq = dev->domain_data.phyirq;
@@ -1957,7 +2045,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
ret = phy_connect_direct(dev->net, phydev,
lan78xx_link_status_change,
- PHY_INTERFACE_MODE_GMII);
+ dev->interface);
if (ret) {
netdev_err(dev->net, "can't attach PHY to %s\n",
dev->mdiobus->id);
@@ -1982,6 +2070,12 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
return 0;
+
+error:
+ phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
+ phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
+
+ return ret;
}
static int lan78xx_set_rx_max_frame_length(struct lan78xx_net *dev, int size)
@@ -2338,6 +2432,9 @@ static int lan78xx_reset(struct lan78xx_net *dev)
} while ((buf & PMT_CTL_PHY_RST_) || !(buf & PMT_CTL_READY_));
ret = lan78xx_read_reg(dev, MAC_CR, &buf);
+ /* LAN7801 only has RGMII mode */
+ if (dev->chipid == ID_REV_CHIP_ID_7801_)
+ buf &= ~MAC_CR_GMII_EN_;
buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
ret = lan78xx_write_reg(dev, MAC_CR, buf);
@@ -2464,8 +2561,12 @@ static int lan78xx_stop(struct net_device *net)
if (timer_pending(&dev->stat_monitor))
del_timer_sync(&dev->stat_monitor);
+ phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
+ phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
+
phy_stop(net->phydev);
phy_disconnect(net->phydev);
+
net->phydev = NULL;
clear_bit(EVENT_DEV_OPEN, &dev->flags);
@@ -3888,6 +3989,10 @@ static const struct usb_device_id products[] = {
/* LAN7850 USB Gigabit Ethernet Device */
USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7850_USB_PRODUCT_ID),
},
+ {
+ /* LAN7801 USB Gigabit Ethernet Device */
+ USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7801_USB_PRODUCT_ID),
+ },
{},
};
MODULE_DEVICE_TABLE(usb, products);
diff --git a/drivers/net/usb/lan78xx.h b/drivers/net/usb/lan78xx.h
index 4092790..25aa546 100644
--- a/drivers/net/usb/lan78xx.h
+++ b/drivers/net/usb/lan78xx.h
@@ -108,6 +108,7 @@
#define ID_REV_CHIP_REV_MASK_ (0x0000FFFF)
#define ID_REV_CHIP_ID_7800_ (0x7800)
#define ID_REV_CHIP_ID_7850_ (0x7850)
+#define ID_REV_CHIP_ID_7801_ (0x7801)
#define FPGA_REV (0x04)
#define FPGA_REV_MINOR_MASK_ (0x0000FF00)
@@ -550,6 +551,7 @@
#define LTM_INACTIVE1_TIMER10_ (0x0000FFFF)
#define MAC_CR (0x100)
+#define MAC_CR_GMII_EN_ (0x00080000)
#define MAC_CR_EEE_TX_CLK_STOP_EN_ (0x00040000)
#define MAC_CR_EEE_EN_ (0x00020000)
#define MAC_CR_EEE_TLAR_EN_ (0x00010000)
@@ -787,6 +789,18 @@
#define PHY_DEV_ID_MODEL_MASK_ (0x0FC00000)
#define PHY_DEV_ID_OUI_MASK_ (0x003FFFFF)
+#define RGMII_TX_BYP_DLL (0x708)
+#define RGMII_TX_BYP_DLL_TX_TUNE_ADJ_MASK_ (0x000FC00)
+#define RGMII_TX_BYP_DLL_TX_TUNE_SEL_MASK_ (0x00003F0)
+#define RGMII_TX_BYP_DLL_TX_DLL_RESET_ (0x0000002)
+#define RGMII_TX_BYP_DLL_TX_DLL_BYPASS_ (0x0000001)
+
+#define RGMII_RX_BYP_DLL (0x70C)
+#define RGMII_RX_BYP_DLL_RX_TUNE_ADJ_MASK_ (0x000FC00)
+#define RGMII_RX_BYP_DLL_RX_TUNE_SEL_MASK_ (0x00003F0)
+#define RGMII_RX_BYP_DLL_RX_DLL_RESET_ (0x0000002)
+#define RGMII_RX_BYP_DLL_RX_DLL_BYPASS_ (0x0000001)
+
#define OTP_BASE_ADDR (0x00001000)
#define OTP_ADDR_RANGE_ (0x1FF)
--
2.7.4
Powered by blists - more mailing lists