| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20161207221918.57932-18-jeffrey.t.kirsher@intel.com>
Date: Wed, 7 Dec 2016 14:19:16 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jacob Keller <jacob.e.keller@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
guru.anbalagane@...cle.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 17/19] i40e: factor out addition/deletion of VLAN per each MAC address
From: Jacob Keller <jacob.e.keller@...el.com>
A future refactor of how the PF assigns a PVID to a VF will want to be
able to add and remove a block of filters by VLAN without worrying about
accidentally triggering the accounting for I40E_VLAN_ANY. Additionally
the PVID assignment would like to be able to batch several changes under
one use of the mac_filter_hash_lock.
Factor out the addition and deletion of a VLAN on all MACs into their
own function which i40e_vsi_(add|kill)_vlan can use. These new functions
expect the caller to take the hash lock, as well as perform any
necessary accounting for updating I40E_VLAN_ANY filters if we are now
operating under VLAN mode.
Change-ID: If79e5b60b770433275350a74b3f1880333a185d5
Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 68 +++++++++++++++++++++++------
1 file changed, 55 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index f9e9c90..8aedfb7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2493,19 +2493,24 @@ static void i40e_vlan_rx_register(struct net_device *netdev, u32 features)
}
/**
- * i40e_vsi_add_vlan - Add vsi membership for given vlan
+ * i40e_add_vlan_all_mac - Add a MAC/VLAN filter for each existing MAC address
* @vsi: the vsi being configured
* @vid: vlan id to be added (0 = untagged only , -1 = any)
+ *
+ * This is a helper function for adding a new MAC/VLAN filter with the
+ * specified VLAN for each existing MAC address already in the hash table.
+ * This function does *not* perform any accounting to update filters based on
+ * VLAN mode.
+ *
+ * NOTE: this function expects to be called while under the
+ * mac_filter_hash_lock
**/
-int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
+static int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid)
{
- struct i40e_mac_filter *f, *add_f, *del_f;
+ struct i40e_mac_filter *f, *add_f;
struct hlist_node *h;
int bkt;
- /* Locked once because all functions invoked below iterates list*/
- spin_lock_bh(&vsi->mac_filter_hash_lock);
-
hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) {
if (f->state == I40E_FILTER_REMOVE)
continue;
@@ -2514,11 +2519,33 @@ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
dev_info(&vsi->back->pdev->dev,
"Could not add vlan filter %d for %pM\n",
vid, f->macaddr);
- spin_unlock_bh(&vsi->mac_filter_hash_lock);
return -ENOMEM;
}
}
+ return 0;
+}
+
+/**
+ * i40e_vsi_add_vlan - Add VSI membership for given VLAN
+ * @vsi: the VSI being configured
+ * @vid: VLAN id to be added (0 = untagged only , -1 = any)
+ **/
+int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
+{
+ struct i40e_mac_filter *f, *add_f, *del_f;
+ struct hlist_node *h;
+ int bkt, err;
+
+ /* Locked once because all functions invoked below iterates list*/
+ spin_lock_bh(&vsi->mac_filter_hash_lock);
+
+ err = i40e_add_vlan_all_mac(vsi, vid);
+ if (err) {
+ spin_unlock_bh(&vsi->mac_filter_hash_lock);
+ return err;
+ }
+
/* When we add a new VLAN filter, we need to make sure that all existing
* filters which are marked as vid=-1 (I40E_VLAN_ANY) are converted to
* vid=0. The simplest way is just search for all filters marked as
@@ -2557,24 +2584,39 @@ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
}
/**
- * i40e_vsi_kill_vlan - Remove vsi membership for given vlan
+ * i40e_rm_vlan_all_mac - Remove MAC/VLAN pair for all MAC with the given VLAN
* @vsi: the vsi being configured
* @vid: vlan id to be removed (0 = untagged only , -1 = any)
- **/
-void i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
+ *
+ * This function should be used to remove all VLAN filters which match the
+ * given VID. It does not schedule the service event and does not take the
+ * mac_filter_hash_lock so it may be combined with other operations under
+ * a single invocation of the mac_filter_hash_lock.
+ *
+ * NOTE: this function expects to be called while under the
+ * mac_filter_hash_lock
+ */
+static void i40e_rm_vlan_all_mac(struct i40e_vsi *vsi, s16 vid)
{
struct i40e_mac_filter *f;
struct hlist_node *h;
int bkt;
- /* Locked once because all functions invoked below iterates list */
- spin_lock_bh(&vsi->mac_filter_hash_lock);
-
hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) {
if (f->vlan == vid)
__i40e_del_filter(vsi, f);
}
+}
+/**
+ * i40e_vsi_kill_vlan - Remove VSI membership for given VLAN
+ * @vsi: the VSI being configured
+ * @vid: VLAN id to be removed (0 = untagged only , -1 = any)
+ **/
+void i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
+{
+ spin_lock_bh(&vsi->mac_filter_hash_lock);
+ i40e_rm_vlan_all_mac(vsi, vid);
spin_unlock_bh(&vsi->mac_filter_hash_lock);
/* schedule our worker thread which will take care of
--
2.9.3
Powered by blists - more mailing lists