| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20161207073354.88568-16-jeffrey.t.kirsher@intel.com>
Date: Tue, 6 Dec 2016 23:33:49 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jacob Keller <jacob.e.keller@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
guru.anbalagane@...cle.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 15/20] i40e: refactor i40e_update_filter_state to avoid passing aq_err
From: Jacob Keller <jacob.e.keller@...el.com>
The current caller of i40e_update_filter_state incorrectly passes
aq_ret, an i40e_status variable, instead of the expected aq_err. This
happens to work because i40e_status is actually just a typedef integer,
and 0 is still the successful return. However i40e_update_filter_state
has special handling for ENOSPC which is currently being ignored.
Also notice that firmware does not update the per-filter response for
many types of errors, such as EINVAL. Thus, modify the filter setup so
that the firmware response memory is pre-set with I40E_AQC_MM_ERR_NO_RES.
This enables us to refactor i40e_update_filter_state, removing the need
to pass aq_err and avoiding a need for having 3 different flows for
checking the filter state.
The resulting code for i40e_update_filter_state is much simpler, only
a single loop and we always check each filter response value every time.
Since we pre-set the response value to match our expected error this
correctly works for all success and error flows.
Change-ID: Ie292c9511f34ee18c6ef40f955ad13e28b7aea7d
Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++------------------
1 file changed, 21 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 2ccf376..8e65972 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1757,7 +1757,6 @@ static void i40e_undo_filter_entries(struct i40e_vsi *vsi,
* @count: Number of filters added
* @add_list: return data from fw
* @head: pointer to first filter in current batch
- * @aq_err: status from fw
*
* MAC filter entries from list were slated to be added to device. Returns
* number of successful filters. Note that 0 does NOT mean success!
@@ -1765,47 +1764,30 @@ static void i40e_undo_filter_entries(struct i40e_vsi *vsi,
static int
i40e_update_filter_state(int count,
struct i40e_aqc_add_macvlan_element_data *add_list,
- struct i40e_mac_filter *add_head, int aq_err)
+ struct i40e_mac_filter *add_head)
{
int retval = 0;
int i;
-
- if (!aq_err) {
- retval = count;
- /* Everything's good, mark all filters active. */
- for (i = 0; i < count ; i++) {
- add_head->state = I40E_FILTER_ACTIVE;
- add_head = hlist_entry(add_head->hlist.next,
- typeof(struct i40e_mac_filter),
- hlist);
- }
- } else if (aq_err == I40E_AQ_RC_ENOSPC) {
- /* Device ran out of filter space. Check the return value
- * for each filter to see which ones are active.
+ for (i = 0; i < count; i++) {
+ /* Always check status of each filter. We don't need to check
+ * the firmware return status because we pre-set the filter
+ * status to I40E_AQC_MM_ERR_NO_RES when sending the filter
+ * request to the adminq. Thus, if it no longer matches then
+ * we know the filter is active.
*/
- for (i = 0; i < count ; i++) {
- if (add_list[i].match_method ==
- I40E_AQC_MM_ERR_NO_RES) {
- add_head->state = I40E_FILTER_FAILED;
- } else {
- add_head->state = I40E_FILTER_ACTIVE;
- retval++;
- }
- add_head = hlist_entry(add_head->hlist.next,
- typeof(struct i40e_mac_filter),
- hlist);
- }
- } else {
- /* Some other horrible thing happened, fail all filters */
- retval = 0;
- for (i = 0; i < count ; i++) {
+ if (add_list[i].match_method == I40E_AQC_MM_ERR_NO_RES) {
add_head->state = I40E_FILTER_FAILED;
- add_head = hlist_entry(add_head->hlist.next,
- typeof(struct i40e_mac_filter),
- hlist);
+ } else {
+ add_head->state = I40E_FILTER_ACTIVE;
+ retval++;
}
+
+ add_head = hlist_entry(add_head->hlist.next,
+ typeof(struct i40e_mac_filter),
+ hlist);
}
+
return retval;
}
@@ -1864,12 +1846,11 @@ void i40e_aqc_add_filters(struct i40e_vsi *vsi, const char *vsi_name,
int num_add, bool *promisc_changed)
{
struct i40e_hw *hw = &vsi->back->hw;
- i40e_status aq_ret;
int aq_err, fcnt;
- aq_ret = i40e_aq_add_macvlan(hw, vsi->seid, list, num_add, NULL);
+ i40e_aq_add_macvlan(hw, vsi->seid, list, num_add, NULL);
aq_err = hw->aq.asq_last_status;
- fcnt = i40e_update_filter_state(num_add, list, add_head, aq_ret);
+ fcnt = i40e_update_filter_state(num_add, list, add_head);
if (fcnt != num_add) {
*promisc_changed = true;
@@ -2168,6 +2149,9 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
cpu_to_le16((u16)(f->vlan));
}
add_list[num_add].queue_number = 0;
+ /* set invalid match method for later detection */
+ add_list[num_add].match_method =
+ cpu_to_le16((u16)I40E_AQC_MM_ERR_NO_RES);
cmd_flags |= I40E_AQC_MACVLAN_ADD_PERFECT_MATCH;
add_list[num_add].flags = cpu_to_le16(cmd_flags);
num_add++;
--
2.9.3
Powered by blists - more mailing lists