netdev - [PATCH net] net/mlx4_en: Fix user prio field in XDP forward

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1482409978-17590-1-git-send-email-tariqt@mellanox.com>
Date:   Thu, 22 Dec 2016 14:32:58 +0200
From:   Tariq Toukan <tariqt@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, Eran Ben Elisha <eranbe@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>,
        Martin KaFai Lau <kafai@...com>,
        Tariq Toukan <tariqt@...lanox.com>
Subject: [PATCH net] net/mlx4_en: Fix user prio field in XDP forward

The user prio field is wrong (and overflows) in the XDP forward
flow.
This is a result of a bad value for num_tx_rings_p_up, which should
account all XDP TX rings, as they operate for the same user prio.

Signed-off-by: Tariq Toukan <tariqt@...lanox.com>
Reported-by: Martin KaFai Lau <kafai@...com>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index bcd955339058..edbe200ac2fa 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1638,7 +1638,8 @@ int mlx4_en_start_port(struct net_device *dev)
 
 	/* Configure tx cq's and rings */
 	for (t = 0 ; t < MLX4_EN_NUM_TX_TYPES; t++) {
-		u8 num_tx_rings_p_up = t == TX ? priv->num_tx_rings_p_up : 1;
+		u8 num_tx_rings_p_up = t == TX ?
+			priv->num_tx_rings_p_up : priv->tx_ring_num[t];
 
 		for (i = 0; i < priv->tx_ring_num[t]; i++) {
 			/* Configure cq */
-- 
1.8.3.1