netdev - [net-next v2 03/21] ixgbe: Fix check for ixgbe_phy_x550em_ext

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170103210757.38847-4-jeffrey.t.kirsher@intel.com>
Date:   Tue,  3 Jan 2017 13:07:39 -0800
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Tony Nguyen <anthony.l.nguyen@...el.com>, netdev@...r.kernel.org,
        nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
        guru.anbalagane@...cle.com,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 03/21] ixgbe: Fix check for ixgbe_phy_x550em_ext_t reset

From: Tony Nguyen <anthony.l.nguyen@...el.com>

The generic PHY reset check we had previously is not sufficient for the
ixgbe_phy_x550em_ext_t PHY type.  Check 1.CC02.0 instead - same as
ixgbe_init_ext_t_x550().

Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 3b83620..b272938 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -452,10 +452,27 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
 	 */
 	for (i = 0; i < 30; i++) {
 		msleep(100);
-		hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &ctrl);
-		if (!(ctrl & MDIO_CTRL1_RESET)) {
-			udelay(2);
-			break;
+		if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+			status = hw->phy.ops.read_reg(hw,
+						  IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+						  MDIO_MMD_PMAPMD, &ctrl);
+			if (status)
+				return status;
+
+			if (ctrl & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
+				udelay(2);
+				break;
+			}
+		} else {
+			status = hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+						      MDIO_MMD_PHYXS, &ctrl);
+			if (status)
+				return status;
+
+			if (!(ctrl & MDIO_CTRL1_RESET)) {
+				udelay(2);
+				break;
+			}
 		}
 	}
 
-- 
2.9.3