[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <65b86b4f-d512-b603-a170-84e132ec0e51@synopsys.com>
Date: Fri, 6 Jan 2017 13:30:48 +0000
From: Joao Pinto <Joao.Pinto@...opsys.com>
To: Alexandre Torgue <alexandre.torgue@...com>,
Joao Pinto <Joao.Pinto@...opsys.com>,
"davem@...emloft.net" <davem@...emloft.net>
CC: "lars.persson@...s.com" <lars.persson@...s.com>,
"niklass@...s.com" <niklass@...s.com>,
"swarren@...dia.com" <swarren@...dia.com>,
"treding@...dia.com" <treding@...dia.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH v3 3/3] stmmac: adding new glue driver dwmac-dwc-qos-eth
Às 1:27 PM de 1/6/2017, Alexandre Torgue escreveu:
> Hi Joao,
>
> On 01/05/2017 06:49 PM, Joao Pinto wrote:
>> Hi Alex,
>>
>> Às 5:19 PM de 1/5/2017, Alexandre Torgue escreveu:
>>> Hi Joao,
>>>
>>> On 01/04/2017 05:22 PM, Joao Pinto wrote:
>>>> This patch adds a new glue driver called dwmac-dwc-qos-eth which
>>>> was based in the dwc_eth_qos as is. To assure retro-compatibility a slight
>>>> tweak was also added to stmmac_platform.
>>>
>>> Sorry to come late in the review. I have a basic question. Why do you create a
>>> glue driver for that ?
>>> dwmac-glues are currently vendor specific, so why create one for IP ? Why not
>>> continue to use stmmac_platform.c ?
>>> (It is very basic, I assume I miss something)
>>>
>>
>> If you check in the kernel tree there is a synopsys qos driver under
>> net/ethernet/synopsys/*.qos.c. At this moment Synopsys has the goal to support
>> QoS in the mainline kernel and so a discussion took place a month ago, about
>> what would be the best solution. At the time we (mailing-list folks) decided to
>> port the net/ethernet/synopsys/*.qos.c driver to stmmac and remove it. This way
>> we can have stmmac has a single synopsys ethernet software package.
>
> Yes I saw a thread about that and also discussed with Peppe. It is a very good
> thing to do that ! so thanks for that.
No problem! Glad to help!
Joao
>
>> For us to achieve this we agreed that stmmac would have
>>
>> Lars the current synopsys/*.qos.c maintainer requested that stmmac be compatible
>> with the devicetree bindings that axis' customers were using in the driver. So
>> if you check the new glue driver, you will see it parses the legacy drivers DT
>> bindings and initiates stmmac. So you can see it like a legacy compatible glue
>> for the stmmac.
>
> Ok if it is to keep compatibility to existing DT.
>
> Acked-by: Alexandre TORGUE <alexandre.torgue@...com>
>
>>
>> Thanks,
>> Joao
>>
>>> thanks
>>> Alex
>>>
>>>
>>>
>>>>
>>>> Signed-off-by: Joao Pinto <jpinto@...opsys.com>
>>>> ---
>>>> changes v2 -> v3:
>>>> - Nothing changed, just to keep up patch set version
>>>> changes v1 -> v2:
>>>> - WOL was not declared in the new glue driver
>>>> - clocks were switched and now fixed (apb_pclk and phy_ref_clk)
>>>>
>>>> .../bindings/net/snps,dwc-qos-ethernet.txt | 3 +
>>>> drivers/net/ethernet/stmicro/stmmac/Kconfig | 9 +
>>>> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
>>>> .../ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c | 200 +++++++++++++++++++++
>>>> .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 15 +-
>>>> 5 files changed, 225 insertions(+), 3 deletions(-)
>>>> create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
>>>> b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
>>>> index d93f71c..21d27aa 100644
>>>> --- a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
>>>> +++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
>>>> @@ -1,5 +1,8 @@
>>>> * Synopsys DWC Ethernet QoS IP version 4.10 driver (GMAC)
>>>>
>>>> +This binding is deprecated, but it continues to be supported, but new
>>>> +features should be preferably added to the stmmac binding document.
>>>> +
>>>> This binding supports the Synopsys Designware Ethernet QoS (Quality Of
>>>> Service)
>>>> IP block. The IP supports multiple options for bus type, clocking and reset
>>>> structure, and feature list. Consequently, a number of properties and list
>>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig
>>>> b/drivers/net/ethernet/stmicro/stmmac/Kconfig
>>>> index ab66248..99594e3 100644
>>>> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
>>>> @@ -29,6 +29,15 @@ config STMMAC_PLATFORM
>>>>
>>>> if STMMAC_PLATFORM
>>>>
>>>> +config DWMAC_DWC_QOS_ETH
>>>> + tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
>>>> + select PHYLIB
>>>> + select CRC32
>>>> + select MII
>>>> + depends on OF && HAS_DMA
>>>> + help
>>>> + Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
>>>> +
>>>> config DWMAC_GENERIC
>>>> tristate "Generic driver for DWMAC"
>>>> default STMMAC_PLATFORM
>>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile
>>>> b/drivers/net/ethernet/stmicro/stmmac/Makefile
>>>> index 8f83a86..700c603 100644
>>>> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
>>>> @@ -16,6 +16,7 @@ obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
>>>> obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
>>>> obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o
>>>> obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
>>>> +obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o
>>>> obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
>>>> stmmac-platform-objs:= stmmac_platform.o
>>>> dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o
>>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
>>>> b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
>>>> new file mode 100644
>>>> index 0000000..4532a7c
>>>> --- /dev/null
>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
>>>> @@ -0,0 +1,200 @@
>>>> +/*
>>>> + * Synopsys DWC Ethernet Quality-of-Service v4.10a linux driver
>>>> + *
>>>> + * Copyright (C) 2016 Joao Pinto <jpinto@...opsys.com>
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 as
>>>> + * published by the Free Software Foundation.
>>>> + *
>>>> + * You should have received a copy of the GNU General Public License
>>>> + * along with this program. If not, see
>>>> <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.gnu.org_licenses_&d=DgIC-g&c=DPL6_X_6JkXFx7AXWqB0tg&r=s2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=WxdcavXD85uZcK9qUC9QsAnK7mu8d7BeoV_d5swO3GI&s=AibQEfk8wEmP3dWHGtq3DBJ2zsceESdTEooLDJV68Zo&e=
>>>>
>>>>> .
>>>> + */
>>>> +
>>>> +#include <linux/clk.h>
>>>> +#include <linux/clk-provider.h>
>>>> +#include <linux/device.h>
>>>> +#include <linux/ethtool.h>
>>>> +#include <linux/io.h>
>>>> +#include <linux/ioport.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/of_net.h>
>>>> +#include <linux/mfd/syscon.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/stmmac.h>
>>>> +
>>>> +#include "stmmac_platform.h"
>>>> +
>>>> +static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
>>>> + struct plat_stmmacenet_data *plat_dat)
>>>> +{
>>>> + struct device_node *np = pdev->dev.of_node;
>>>> + u32 burst_map = 0;
>>>> + u32 bit_index = 0;
>>>> + u32 a_index = 0;
>>>> +
>>>> + if (!plat_dat->axi) {
>>>> + plat_dat->axi = kzalloc(sizeof(struct stmmac_axi), GFP_KERNEL);
>>>> +
>>>> + if (!plat_dat->axi)
>>>> + return -ENOMEM;
>>>> + }
>>>> +
>>>> + plat_dat->axi->axi_lpi_en = of_property_read_bool(np, "snps,en-lpi");
>>>> + if (of_property_read_u32(np, "snps,write-requests",
>>>> + &plat_dat->axi->axi_wr_osr_lmt)) {
>>>> + /**
>>>> + * Since the register has a reset value of 1, if property
>>>> + * is missing, default to 1.
>>>> + */
>>>> + plat_dat->axi->axi_wr_osr_lmt = 1;
>>>> + } else {
>>>> + /**
>>>> + * If property exists, to keep the behavior from dwc_eth_qos,
>>>> + * subtract one after parsing.
>>>> + */
>>>> + plat_dat->axi->axi_wr_osr_lmt--;
>>>> + }
>>>> +
>>>> + if (of_property_read_u32(np, "read,read-requests",
>>>> + &plat_dat->axi->axi_rd_osr_lmt)) {
>>>> + /**
>>>> + * Since the register has a reset value of 1, if property
>>>> + * is missing, default to 1.
>>>> + */
>>>> + plat_dat->axi->axi_rd_osr_lmt = 1;
>>>> + } else {
>>>> + /**
>>>> + * If property exists, to keep the behavior from dwc_eth_qos,
>>>> + * subtract one after parsing.
>>>> + */
>>>> + plat_dat->axi->axi_rd_osr_lmt--;
>>>> + }
>>>> + of_property_read_u32(np, "snps,burst-map", &burst_map);
>>>> +
>>>> + /* converts burst-map bitmask to burst array */
>>>> + for (bit_index = 0; bit_index < 7; bit_index++) {
>>>> + if (burst_map & (1 << bit_index)) {
>>>> + switch (bit_index) {
>>>> + case 0:
>>>> + plat_dat->axi->axi_blen[a_index] = 4; break;
>>>> + case 1:
>>>> + plat_dat->axi->axi_blen[a_index] = 8; break;
>>>> + case 2:
>>>> + plat_dat->axi->axi_blen[a_index] = 16; break;
>>>> + case 3:
>>>> + plat_dat->axi->axi_blen[a_index] = 32; break;
>>>> + case 4:
>>>> + plat_dat->axi->axi_blen[a_index] = 64; break;
>>>> + case 5:
>>>> + plat_dat->axi->axi_blen[a_index] = 128; break;
>>>> + case 6:
>>>> + plat_dat->axi->axi_blen[a_index] = 256; break;
>>>> + default:
>>>> + break;
>>>> + }
>>>> + a_index++;
>>>> + }
>>>> + }
>>>> +
>>>> + /* dwc-qos needs GMAC4, AAL, TSO and PMT */
>>>> + plat_dat->has_gmac4 = 1;
>>>> + plat_dat->dma_cfg->aal = 1;
>>>> + plat_dat->tso_en = 1;
>>>> + plat_dat->pmt = 1;
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int dwc_eth_dwmac_probe(struct platform_device *pdev)
>>>> +{
>>>> + struct plat_stmmacenet_data *plat_dat;
>>>> + struct stmmac_resources stmmac_res;
>>>> + struct resource *res;
>>>> + int ret;
>>>> +
>>>> + /**
>>>> + * Since stmmac_platform supports name IRQ only, basic platform
>>>> + * resource initialization is done in the glue logic.
>>>> + */
>>>> + stmmac_res.irq = platform_get_irq(pdev, 0);
>>>> + if (stmmac_res.irq < 0) {
>>>> + if (stmmac_res.irq != -EPROBE_DEFER) {
>>>> + dev_err(&pdev->dev,
>>>> + "IRQ configuration information not found\n");
>>>> + }
>>>> + return stmmac_res.irq;
>>>> + }
>>>> + stmmac_res.wol_irq = stmmac_res.irq;
>>>> +
>>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>> + stmmac_res.addr = devm_ioremap_resource(&pdev->dev, res);
>>>> + if (IS_ERR(stmmac_res.addr))
>>>> + return PTR_ERR(stmmac_res.addr);
>>>> +
>>>> + plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
>>>> + if (IS_ERR(plat_dat))
>>>> + return PTR_ERR(plat_dat);
>>>> +
>>>> + plat_dat->stmmac_clk = devm_clk_get(&pdev->dev, "apb_pclk");
>>>> + if (IS_ERR(plat_dat->stmmac_clk)) {
>>>> + dev_err(&pdev->dev, "apb_pclk clock not found.\n");
>>>> + ret = PTR_ERR(plat_dat->stmmac_clk);
>>>> + plat_dat->stmmac_clk = NULL;
>>>> + goto err_remove_config_dt;
>>>> + }
>>>> + clk_prepare_enable(plat_dat->stmmac_clk);
>>>> +
>>>> + plat_dat->pclk = devm_clk_get(&pdev->dev, "phy_ref_clk");
>>>> + if (IS_ERR(plat_dat->pclk)) {
>>>> + dev_err(&pdev->dev, "phy_ref_clk clock not found.\n");
>>>> + ret = PTR_ERR(plat_dat->pclk);
>>>> + plat_dat->pclk = NULL;
>>>> + goto err_out_clk_dis_phy;
>>>> + }
>>>> + clk_prepare_enable(plat_dat->pclk);
>>>> +
>>>> + ret = dwc_eth_dwmac_config_dt(pdev, plat_dat);
>>>> + if (ret)
>>>> + goto err_out_clk_dis_aper;
>>>> +
>>>> + ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
>>>> + if (ret)
>>>> + goto err_out_clk_dis_aper;
>>>> +
>>>> + return 0;
>>>> +
>>>> +err_out_clk_dis_aper:
>>>> + clk_disable_unprepare(plat_dat->pclk);
>>>> +err_out_clk_dis_phy:
>>>> + clk_disable_unprepare(plat_dat->stmmac_clk);
>>>> +err_remove_config_dt:
>>>> + stmmac_remove_config_dt(pdev, plat_dat);
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static int dwc_eth_dwmac_remove(struct platform_device *pdev)
>>>> +{
>>>> + return stmmac_pltfr_remove(pdev);
>>>> +}
>>>> +
>>>> +static const struct of_device_id dwc_eth_dwmac_match[] = {
>>>> + { .compatible = "snps,dwc-qos-ethernet-4.10", },
>>>> + { }
>>>> +};
>>>> +MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match);
>>>> +
>>>> +static struct platform_driver dwc_eth_dwmac_driver = {
>>>> + .probe = dwc_eth_dwmac_probe,
>>>> + .remove = dwc_eth_dwmac_remove,
>>>> + .driver = {
>>>> + .name = "dwc-eth-dwmac",
>>>> + .of_match_table = dwc_eth_dwmac_match,
>>>> + },
>>>> +};
>>>> +module_platform_driver(dwc_eth_dwmac_driver);
>>>> +
>>>> +MODULE_AUTHOR("Joao Pinto <jpinto@...opsys.com>");
>>>> +MODULE_DESCRIPTION("Synopsys DWC Ethernet Quality-of-Service v4.10a driver");
>>>> +MODULE_LICENSE("GPL v2");
>>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>>>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>>>> index 4e44f9c..00c0f8d 100644
>>>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>>>> @@ -181,10 +181,19 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data
>>>> *plat,
>>>> mdio = false;
>>>> }
>>>>
>>>> - /* If snps,dwmac-mdio is passed from DT, always register the MDIO */
>>>> - for_each_child_of_node(np, plat->mdio_node) {
>>>> - if (of_device_is_compatible(plat->mdio_node, "snps,dwmac-mdio"))
>>>> + /* exception for dwmac-dwc-qos-eth glue logic */
>>>> + if (of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
>>>> + plat->mdio_node = of_get_child_by_name(np, "mdio");
>>>> + } else {
>>>> + /**
>>>> + * If snps,dwmac-mdio is passed from DT, always register
>>>> + * the MDIO
>>>> + */
>>>> + for_each_child_of_node(np, plat->mdio_node) {
>>>> + if (of_device_is_compatible(plat->mdio_node,
>>>> + "snps,dwmac-mdio"))
>>>> break;
>>>> + }
>>>> }
>>>>
>>>> if (plat->mdio_node) {
>>>>
>>
Powered by blists - more mailing lists