[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170106104852.10363-2-jeffrey.t.kirsher@intel.com>
Date: Fri, 6 Jan 2017 02:48:43 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Joe Perches <joe@...ches.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
guru.anbalagane@...cle.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 01/10] igb: Realign bad indentation
From: Joe Perches <joe@...ches.com>
Statements should start on tabstops.
Use a single statement and test instead of multiple tests.
Signed-off-by: Joe Perches <joe@...ches.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igb/e1000_mac.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
index 5010e22..5eff826 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mac.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
@@ -792,15 +792,13 @@ static s32 igb_set_default_fc(struct e1000_hw *hw)
* control setting, then the variable hw->fc will
* be initialized based on a value in the EEPROM.
*/
- if (hw->mac.type == e1000_i350) {
+ if (hw->mac.type == e1000_i350)
lan_offset = NVM_82580_LAN_FUNC_OFFSET(hw->bus.func);
- ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG
- + lan_offset, 1, &nvm_data);
- } else {
- ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG,
- 1, &nvm_data);
- }
+ else
+ lan_offset = 0;
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG + lan_offset,
+ 1, &nvm_data);
if (ret_val) {
hw_dbg("NVM Read Error\n");
goto out;
@@ -808,8 +806,7 @@ static s32 igb_set_default_fc(struct e1000_hw *hw)
if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
hw->fc.requested_mode = e1000_fc_none;
- else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
- NVM_WORD0F_ASM_DIR)
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR)
hw->fc.requested_mode = e1000_fc_tx_pause;
else
hw->fc.requested_mode = e1000_fc_full;
--
2.9.3
Powered by blists - more mailing lists