netdev - Re: [PATCH v2] phy state machine: failsafe leave invalid RUNNING state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20170109.153834.324373071333188738.davem@davemloft.net>
Date:   Mon, 09 Jan 2017 15:38:34 -0500 (EST)
From:   David Miller <davem@...emloft.net>
To:     zefir.kurtisi@...atec.com
Cc:     netdev@...r.kernel.org, f.fainelli@...il.com, andrew@...n.ch
Subject: Re: [PATCH v2] phy state machine: failsafe leave invalid RUNNING
 state

From: Zefir Kurtisi <zefir.kurtisi@...atec.com>
Date: Fri,  6 Jan 2017 12:14:48 +0100

> While in RUNNING state, phy_state_machine() checks for link changes by
> comparing phydev->link before and after calling phy_read_status().
> This works as long as it is guaranteed that phydev->link is never
> changed outside the phy_state_machine().
> 
> If in some setups this happens, it causes the state machine to miss
> a link loss and remain RUNNING despite phydev->link being 0.
> 
> This has been observed running a dsa setup with a process continuously
> polling the link states over ethtool each second (SNMPD RFC-1213
> agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET
> causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to
> call phy_read_status() and with that modify the link status - and
> with that bricking the phy state machine.
> 
> This patch adds a fail-safe check while in RUNNING, which causes to
> move to CHANGELINK when the link is gone and we are still RUNNING.
> 
> Signed-off-by: Zefir Kurtisi <zefir.kurtisi@...atec.com>

Patch applied, thanks.