[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170110201235.21771-1-f.fainelli@gmail.com>
Date: Tue, 10 Jan 2017 12:12:27 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Gregory Clement <gregory.clement@...e-electrons.com>,
Russell King <linux@...linux.org.uk>,
Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
"David S. Miller" <davem@...emloft.net>,
Philippe Reynes <tremyfr@...il.com>,
Martin Schwidefsky <schwidefsky@...ibm.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Stuart Yoder <stuart.yoder@....com>,
Ingo Tuchscherer <ingo.tuchscherer@...ux.vnet.ibm.com>,
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Marvell
Dove/MV78xx0/Orion SOC support),
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net-next 0/8] net: dsa: Support for pdata in dsa2
Hi all,
This is not exactly new, and was sent before, although back then, I did not
have an user of the pre-declared MDIO board information, but now we do. Note
that I have additional changes queued up to have b53 register platform data for
MIPS bcm47xx and bcm63xx.
Yes I know that we should have the Orion platforms eventually be converted to
Device Tree, but until that happens, I don't want any remaining users of the
old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu)
and, there will be platforms out there that most likely won't never see DT
coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant
future).
We would probably want the whole series to be merged via David Miller's tree
to simplify things.
Thanks!
Changes from last submission (few months back):
- rebased against latest net-next
- do not introduce dsa2_platform_data which was overkill and was meant to
allow us to do exaclty the same things with platform data and Device Tree
we use the existing dsa_platform_data instead
- properly register MDIO devices when the MDIO bus is registered and associate
platform_data with them
- add a change to the Orion platform code to demonstrate how this can be used
Thank you
Florian Fainelli (8):
net: dsa: Pass device pointer to dsa_register_switch
net: dsa: Make most functions take a dsa_port argument
net: dsa: Suffix function manipulating device_node with _dn
net: dsa: Move ports assignment closer to error checking
net: dsa: Export dev_to_net_device()
net: dsa: Add support for platform data
net: phy: Allow pre-declaration of MDIO devices
ARM: orion: Register DSA switch as a MDIO device
arch/arm/plat-orion/common.c | 19 ++++-
drivers/net/dsa/b53/b53_common.c | 2 +-
drivers/net/dsa/mv88e6xxx/chip.c | 8 +-
drivers/net/dsa/qca8k.c | 2 +-
drivers/net/phy/Makefile | 3 +-
drivers/net/phy/mdio-boardinfo.c | 86 ++++++++++++++++++++
drivers/net/phy/mdio-boardinfo.h | 19 +++++
drivers/net/phy/mdio_bus.c | 5 ++
drivers/net/phy/mdio_device.c | 11 +++
include/linux/mdio.h | 3 +
include/linux/mod_devicetable.h | 1 +
include/linux/phy.h | 19 +++++
include/net/dsa.h | 4 +-
net/dsa/dsa.c | 18 +++--
net/dsa/dsa2.c | 169 +++++++++++++++++++++++++++------------
net/dsa/dsa_priv.h | 4 +-
16 files changed, 301 insertions(+), 72 deletions(-)
create mode 100644 drivers/net/phy/mdio-boardinfo.c
create mode 100644 drivers/net/phy/mdio-boardinfo.h
--
2.9.3
Powered by blists - more mailing lists