lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1cS3ft-0003Xc-OH@rmk-PC.armlinux.org.uk>
Date:   Fri, 13 Jan 2017 15:21:53 +0000
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     Florian Fainelli <f.fainelli@...il.com>
Cc:     linux-usb@...r.kernel.org,
        Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
        netdev@...r.kernel.org, Woojung Huh <woojung.huh@...rochip.com>,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH RFC 3/7] net: lan78xx: update for
 phy_(read|write)_mmd_indirect() removal

lan78xx appears to use phylib in a rather weird way, accessing the PHY
partly through phylib, and partly by makign direct accesses to it,
including to the Clause 45 registers.  As the indirect MMD accessors are
going away, update this driver to use the plain phy_(read|write)_mmd()
accessors instead.

Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 drivers/net/usb/lan78xx.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 08f8703e4d54..5e222d47f212 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1951,10 +1951,10 @@ static int lan8835_fixup(struct phy_device *phydev)
 	struct lan78xx_net *dev = netdev_priv(phydev->attached_dev);
 
 	/* LED2/PME_N/IRQ_N/RGMII_ID pin to IRQ_N mode */
-	buf = phy_read_mmd_indirect(phydev, 0x8010, 3);
+	buf = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x8010);
 	buf &= ~0x1800;
 	buf |= 0x0800;
-	phy_write_mmd_indirect(phydev, 0x8010, 3, buf);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8010, buf);
 
 	/* RGMII MAC TXC Delay Enable */
 	ret = lan78xx_write_reg(dev, MAC_RGMII_ID,
@@ -1974,11 +1974,11 @@ static int ksz9031rnx_fixup(struct phy_device *phydev)
 
 	/* Micrel9301RNX PHY configuration */
 	/* RGMII Control Signal Pad Skew */
-	phy_write_mmd_indirect(phydev, 4, 2, 0x0077);
+	phy_write_mmd(phydev, MDIO_MMD_WIS, 4, 0x0077);
 	/* RGMII RX Data Pad Skew */
-	phy_write_mmd_indirect(phydev, 5, 2, 0x7777);
+	phy_write_mmd(phydev, MDIO_MMD_WIS, 5, 0x7777);
 	/* RGMII RX Clock Pad Skew */
-	phy_write_mmd_indirect(phydev, 8, 2, 0x1FF);
+	phy_write_mmd(phydev, MDIO_MMD_WIS, 8, 0x1FF);
 
 	dev->interface = PHY_INTERFACE_MODE_RGMII_RXID;
 
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ