[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1484669670-4201-2-git-send-email-yendapally.reddy@broadcom.com>
Date: Tue, 17 Jan 2017 11:14:27 -0500
From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Jon Mason <jonmason@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Kishon Vijay Abraham I <kishon@...com>
Cc: bcm-kernel-feedback-list@...adcom.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
netdev@...r.kernel.org,
Yendapally Reddy Dhananjaya Reddy
<yendapally.reddy@...adcom.com>
Subject: [PATCH v2 1/4] dt-bindings: phy: Add documentation for NSP USB3 PHY
Add documentation for USB3 PHY available in Northstar plus SoC
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@...adcom.com>
---
.../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
new file mode 100644
index 0000000..e68ae5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
@@ -0,0 +1,39 @@
+Broadcom USB3 phy binding for northstar plus SoC
+The USB3 phy is internal to the SoC and is accessed using mdio interface.
+
+Required mdio bus properties:
+- reg: Should be 0x0 for SoC internal USB3 phy
+- #address-cells: must be 1
+- #size-cells: must be 0
+
+Required USB3 PHY properties:
+- compatible: should be "brcm,nsp-usb3-phy"
+- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
+- usb3-ctrl-syscon: handler of syscon node defining physical address
+ of usb3 control register.
+- #phy-cells: must be 0
+
+Required usb3 control properties:
+- compatible: should be "brcm,nsp-usb3-ctrl"
+- reg: offset and length of the control registers
+
+Example:
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_phy: usb-phy@10 {
+ compatible = "brcm,nsp-usb3-phy";
+ reg = <0x10>;
+ usb3-ctrl-syscon = <&usb3_ctrl>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usb3_ctrl: syscon@...408 {
+ compatible = "brcm,nsp-usb3-ctrl", "syscon";
+ reg = <0x104408 0x3fc>;
+ };
--
2.1.0
Powered by blists - more mailing lists