| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170120203634.2773-4-f.fainelli@gmail.com>
Date: Fri, 20 Jan 2017 12:36:30 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, vivien.didelot@...oirfairelinux.com,
andrew@...n.ch, Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next 3/7] net: dsa: bcm_sf2: Add support for BCM7278 integrated switch
Add support for the integrated switch found on BCM7278:
- core_reg_align is set to 1, to force a translation into the target
address space which is 8 bytes aligned
- an alternate SWITCH_REG layout is provided since registers are largely
bit/masks compatible but have different offsets
- conditional for all CORE_STS_OVERRIDE_{IMP,GMII_P} since those got
moved way out of the traditional register space
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
.../bindings/net/brcm,bcm7445-switch-v4.0.txt | 2 +-
drivers/net/dsa/b53/b53_common.c | 12 +++++
drivers/net/dsa/b53/b53_priv.h | 4 +-
drivers/net/dsa/bcm_sf2.c | 56 ++++++++++++++++++----
drivers/net/dsa/bcm_sf2_regs.h | 4 ++
5 files changed, 68 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
index fb40891ee606..e1b2c3e32859 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -2,7 +2,7 @@
Required properties:
-- compatible: should be "brcm,bcm7445-switch-v4.0"
+- compatible: should be "brcm,bcm7445-switch-v4.0" or "brcm,bcm7278-switch-v4.0"
- reg: addresses and length of the register sets for the device, must be 6
pairs of register addresses and lengths
- interrupts: interrupts for the devices, must be two interrupts
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 5102a3701a1a..5cbb14f6a03b 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1685,6 +1685,18 @@ static const struct b53_chip_data b53_switch_chips[] = {
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
+ {
+ .chip_id = BCM7278_DEVICE_ID,
+ .dev_name = "BCM7278",
+ .vlans = 4096,
+ .enabled_ports = 0x1ff,
+ .arl_entries= 4,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
};
static int b53_switch_init(struct b53_device *dev)
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 86f125d55aaf..a8031b382c55 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -62,6 +62,7 @@ enum {
BCM53019_DEVICE_ID = 0x53019,
BCM58XX_DEVICE_ID = 0x5800,
BCM7445_DEVICE_ID = 0x7445,
+ BCM7278_DEVICE_ID = 0x7278,
};
#define B53_N_PORTS 9
@@ -179,7 +180,8 @@ static inline int is5301x(struct b53_device *dev)
static inline int is58xx(struct b53_device *dev)
{
return dev->chip_id == BCM58XX_DEVICE_ID ||
- dev->chip_id == BCM7445_DEVICE_ID;
+ dev->chip_id == BCM7445_DEVICE_ID ||
+ dev->chip_id == BCM7278_DEVICE_ID;
}
#define B53_CPU_PORT_25 5
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index d952099afc60..02afa0598b24 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -64,7 +64,12 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- u32 reg, val;
+ u32 reg, val, offset;
+
+ if (priv->type == BCM7445_DEVICE_ID)
+ offset = CORE_STS_OVERRIDE_IMP;
+ else
+ offset = CORE_STS_OVERRIDE_IMP2;
/* Enable the port memories */
reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
@@ -121,9 +126,9 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
/* Force link status for IMP port */
- reg = core_readl(priv, CORE_STS_OVERRIDE_IMP);
+ reg = core_readl(priv, offset);
reg |= (MII_SW_OR | LINK_STS);
- core_writel(priv, reg, CORE_STS_OVERRIDE_IMP);
+ core_writel(priv, reg, offset);
}
static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
@@ -591,7 +596,12 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
struct ethtool_eee *p = &priv->port_sts[port].eee;
u32 id_mode_dis = 0, port_mode;
const char *str = NULL;
- u32 reg;
+ u32 reg, offset;
+
+ if (priv->type == BCM7445_DEVICE_ID)
+ offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+ else
+ offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
switch (phydev->interface) {
case PHY_INTERFACE_MODE_RGMII:
@@ -662,7 +672,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
if (phydev->duplex == DUPLEX_FULL)
reg |= DUPLX_MODE;
- core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+ core_writel(priv, reg, offset);
if (!phydev->is_pseudo_fixed_link)
p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
@@ -672,9 +682,14 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
struct fixed_phy_status *status)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- u32 duplex, pause;
+ u32 duplex, pause, offset;
u32 reg;
+ if (priv->type == BCM7445_DEVICE_ID)
+ offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+ else
+ offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+
duplex = core_readl(priv, CORE_DUPSTS);
pause = core_readl(priv, CORE_PAUSESTS);
@@ -703,13 +718,13 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
status->duplex = !!(duplex & (1 << port));
}
- reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+ reg = core_readl(priv, offset);
reg |= SW_OVERRIDE;
if (status->link)
reg |= LINK_STS;
else
reg &= ~LINK_STS;
- core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+ core_writel(priv, reg, offset);
if ((pause & (1 << port)) &&
(pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {
@@ -1038,10 +1053,35 @@ static const struct bcm_sf2_of_data bcm_sf2_7445_data = {
.reg_offsets = bcm_sf2_7445_reg_offsets,
};
+static const u16 bcm_sf2_7278_reg_offsets[] = {
+ [REG_SWITCH_CNTRL] = 0x00,
+ [REG_SWITCH_STATUS] = 0x04,
+ [REG_DIR_DATA_WRITE] = 0x08,
+ [REG_DIR_DATA_READ] = 0x0c,
+ [REG_SWITCH_REVISION] = 0x10,
+ [REG_PHY_REVISION] = 0x14,
+ [REG_SPHY_CNTRL] = 0x24,
+ [REG_RGMII_0_CNTRL] = 0xe0,
+ [REG_RGMII_1_CNTRL] = 0xec,
+ [REG_RGMII_2_CNTRL] = 0xf8,
+ [REG_LED_0_CNTRL] = 0x40,
+ [REG_LED_1_CNTRL] = 0x4c,
+ [REG_LED_2_CNTRL] = 0x58,
+};
+
+static const struct bcm_sf2_of_data bcm_sf2_7278_data = {
+ .type = BCM7278_DEVICE_ID,
+ .core_reg_align = 1,
+ .reg_offsets = bcm_sf2_7278_reg_offsets,
+};
+
static const struct of_device_id bcm_sf2_of_match[] = {
{ .compatible = "brcm,bcm7445-switch-v4.0",
.data = &bcm_sf2_7445_data
},
+ { .compatible = "brcm,bcm7278-switch-v4.0",
+ .data = &bcm_sf2_7278_data
+ },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, bcm_sf2_of_match);
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index f5e566304f0c..3b33b8010cc8 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -134,6 +134,9 @@ enum bcm_sf2_reg_offs {
#define GMII_SPEED_UP_2G (1 << 6)
#define MII_SW_OR (1 << 7)
+/* Alternate layout for e.g: 7278 */
+#define CORE_STS_OVERRIDE_IMP2 0x39040
+
#define CORE_NEW_CTRL 0x00084
#define IP_MC (1 << 0)
#define OUTRANGEERR_DISCARD (1 << 1)
@@ -151,6 +154,7 @@ enum bcm_sf2_reg_offs {
#define SW_LEARN_CNTL(x) (1 << (x))
#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4)
+#define CORE_STS_OVERRIDE_GMIIP2_PORT(x) (0x39000 + (x) * 8)
#define LINK_STS (1 << 0)
#define DUPLX_MODE (1 << 1)
#define SPEED_SHIFT 2
--
2.9.3
Powered by blists - more mailing lists