[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1485469096-5271-10-git-send-email-netanel@annapurnalabs.com>
Date: Fri, 27 Jan 2017 00:18:11 +0200
From: Netanel Belgazal <netanel@...apurnalabs.com>
To: linux-kernel@...r.kernel.org, davem@...emloft.net,
netdev@...r.kernel.org
Cc: Netanel Belgazal <netanel@...apurnalabs.com>, dwmw@...zon.com,
zorik@...apurnalabs.com, alex@...apurnalabs.com,
saeed@...apurnalabs.com, msw@...zon.com, aliguori@...zon.com,
nafea@...apurnalabs.com, eric.dumazet@...il.com
Subject: [PATCH V3 net-next 09/14] net/ena: use napi_complete_done() return value
Do not unamsk interrupts if we are in busy poll mode.
Signed-off-by: Netanel Belgazal <netanel@...apurnalabs.com>
---
drivers/net/ethernet/amazon/ena/ena_netdev.c | 44 ++++++++++++++++++----------
1 file changed, 29 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 606fb5c..d1e1d9d 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -1122,26 +1122,40 @@ static int ena_io_poll(struct napi_struct *napi, int budget)
tx_work_done = ena_clean_tx_irq(tx_ring, tx_budget);
rx_work_done = ena_clean_rx_irq(rx_ring, napi, budget);
- if ((budget > rx_work_done) && (tx_budget > tx_work_done)) {
- napi_complete_done(napi, rx_work_done);
+ /* If the device is about to reset or down, avoid unmask
+ * the interrupt and return 0 so NAPI won't reschedule
+ */
+ if (unlikely(!test_bit(ENA_FLAG_DEV_UP, &tx_ring->adapter->flags) ||
+ test_bit(ENA_FLAG_TRIGGER_RESET, &tx_ring->adapter->flags))) {
+ napi_complete_done(napi, 0);
+ ret = 0;
+ } else if ((budget > rx_work_done) && (tx_budget > tx_work_done)) {
napi_comp_call = 1;
- /* Tx and Rx share the same interrupt vector */
- if (ena_com_get_adaptive_moderation_enabled(rx_ring->ena_dev))
- ena_adjust_intr_moderation(rx_ring, tx_ring);
- /* Update intr register: rx intr delay, tx intr delay and
- * interrupt unmask
+ /* Update numa and unmask the interrupt only when schedule
+ * from the interrupt context (vs from sk_busy_loop)
*/
- ena_com_update_intr_reg(&intr_reg,
- rx_ring->smoothed_interval,
- tx_ring->smoothed_interval,
- true);
+ if (napi_complete_done(napi, rx_work_done)) {
+ /* Tx and Rx share the same interrupt vector */
+ if (ena_com_get_adaptive_moderation_enabled(rx_ring->ena_dev))
+ ena_adjust_intr_moderation(rx_ring, tx_ring);
+
+ /* Update intr register: rx intr delay,
+ * tx intr delay and interrupt unmask
+ */
+ ena_com_update_intr_reg(&intr_reg,
+ rx_ring->smoothed_interval,
+ tx_ring->smoothed_interval,
+ true);
+
+ /* It is a shared MSI-X.
+ * Tx and Rx CQ have pointer to it.
+ * So we use one of them to reach the intr reg
+ */
+ ena_com_unmask_intr(rx_ring->ena_com_io_cq, &intr_reg);
+ }
- /* It is a shared MSI-X. Tx and Rx CQ have pointer to it.
- * So we use one of them to reach the intr reg
- */
- ena_com_unmask_intr(rx_ring->ena_com_io_cq, &intr_reg);
ena_update_ring_numa_node(tx_ring, rx_ring);
--
2.7.4
Powered by blists - more mailing lists