netdev - Re: [PATCH 2/6] wl1251: Use request_firmware_prefer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170127101043.GD24223@pali>
Date:   Fri, 27 Jan 2017 11:10:43 +0100
From:   Pali Rohár <pali.rohar@...il.com>
To:     Arend Van Spriel <arend.vanspriel@...adcom.com>
Cc:     Kalle Valo <kvalo@...eaurora.org>,
        Ming Lei <ming.lei@...onical.com>,
        "Luis R. Rodriguez" <mcgrof@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        David Gnedt <david.gnedt@...izone.at>,
        Michal Kazior <michal.kazior@...to.com>,
        Daniel Wagner <wagi@...om.org>,
        Tony Lindgren <tony@...mide.com>,
        Sebastian Reichel <sre@...nel.org>,
        Pavel Machek <pavel@....cz>,
        Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>,
        Aaro Koskinen <aaro.koskinen@....fi>,
        Grazvydas Ignotas <notasas@...il.com>,
        linux-kernel@...r.kernel.org, linux-wireless@...r.kernel.org,
        netdev@...r.kernel.org
Subject: Re: [PATCH 2/6] wl1251: Use request_firmware_prefer_user() for
 loading NVS calibration data

On Friday 27 January 2017 11:05:32 Arend Van Spriel wrote:
> On 27-1-2017 10:43, Pali Rohár wrote:
> > On Friday 27 January 2017 09:33:40 Kalle Valo wrote:
> >> Pali Rohár <pali.rohar@...il.com> writes:
> >>
> >>> NVS calibration data for wl1251 are model specific. Every one device with
> >>> wl1251 chip has different and calibrated in factory.
> >>>
> >>> Not all wl1251 chips have own EEPROM where are calibration data stored. And
> >>> in that case there is no "standard" place. Every device has stored them on
> >>> different place (some in rootfs file, some in dedicated nand partition,
> >>> some in another proprietary structure).
> >>>
> >>> Kernel wl1251 driver cannot support every one different storage decided by
> >>> device manufacture so it will use request_firmware_prefer_user() call for
> >>> loading NVS calibration data and userspace helper will be responsible to
> >>> prepare correct data.
> >>>
> >>> In case userspace helper fails request_firmware_prefer_user() still try to
> >>> load data file directly from VFS as fallback mechanism.
> >>>
> >>> On Nokia N900 device which has wl1251 chip, NVS calibration data are stored
> >>> in CAL nand partition. CAL is proprietary Nokia key/value format for nand
> >>> devices.
> >>>
> >>> With this patch it is finally possible to load correct model specific NVS
> >>> calibration data for Nokia N900.
> >>>
> >>> Signed-off-by: Pali Rohár <pali.rohar@...il.com>
> >>> ---
> >>>  drivers/net/wireless/ti/wl1251/Kconfig |    1 +
> >>>  drivers/net/wireless/ti/wl1251/main.c  |    2 +-
> >>>  2 files changed, 2 insertions(+), 1 deletion(-)
> >>>
> >>> diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig
> >>> index 7142ccf..affe154 100644
> >>> --- a/drivers/net/wireless/ti/wl1251/Kconfig
> >>> +++ b/drivers/net/wireless/ti/wl1251/Kconfig
> >>> @@ -2,6 +2,7 @@ config WL1251
> >>>  	tristate "TI wl1251 driver support"
> >>>  	depends on MAC80211
> >>>  	select FW_LOADER
> >>> +	select FW_LOADER_USER_HELPER
> >>>  	select CRC7
> >>>  	---help---
> >>>  	  This will enable TI wl1251 driver support. The drivers make
> >>> diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
> >>> index 208f062..24f8866 100644
> >>> --- a/drivers/net/wireless/ti/wl1251/main.c
> >>> +++ b/drivers/net/wireless/ti/wl1251/main.c
> >>> @@ -110,7 +110,7 @@ static int wl1251_fetch_nvs(struct wl1251 *wl)
> >>>  	struct device *dev = wiphy_dev(wl->hw->wiphy);
> >>>  	int ret;
> >>>  
> >>> -	ret = request_firmware(&fw, WL1251_NVS_NAME, dev);
> >>> +	ret = request_firmware_prefer_user(&fw, WL1251_NVS_NAME, dev);
> >>
> >> I don't see the need for this. Just remove the default nvs file from
> >> filesystem and the fallback user helper will be always used, right?
> > 
> > It is part of linux-firmware repository. And already part of all
> > previous versions of linux-firmware packages in lot of linux
> > distributions. So removing it is not possible...
> 
> You are probably saying that on your platform you can not remove
> anything from /lib/firmware, right? I don't see how you come from "it is
> part of firmware package" to "removing is not possible". Trying to
> understand this and it makes no sense.

It is already in linux distribution packages. If I remove that file from
file system it will be placed there again by package management or it it
will throw error message about system integrity (missing file, etc...).

Also that file is already in linux-firmware git and so is propagated to
/lib/firmware by anybody who is using linux-firmware.

> >> Like we discussed earlier, the default nvs file should not be used by
> >> normal users.
> > 
> > But already is and we need to deal with this fact.
> 
> Why?

Because everybody has already installed it.

> Are there other platforms that use the default nvs file and have a
> working wifi.

I do not know.

> So your "removing is not possible" would be about
> regression for those?

Yes, that is possible.

Also you can use wifi on Nokia N900 with this default file. Yes it is
not recommended and probably has performance problems... but more people
use it for SSH and it is working. Pavel could confirm this.

So yes, if you remove that file *now* there is regression for Nokia N900
when you are using SSH over wifi.

-- 
Pali Rohár
pali.rohar@...il.com