Message-ID: <e981721a-f3d8-bcfa-0ff1-3bf3ca1402ab@st.com>
Date:   Tue, 31 Jan 2017 11:03:33 +0100
From:   Giuseppe CAVALLARO <peppe.cavallaro@...com>
To:     Corentin Labbe <clabbe.montjoie@...il.com>,
        <alexandre.torgue@...com>, <netdev@...r.kernel.org>
CC:     <davem@...emloft.net>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 03/17] net: stmmac: fix some typos in comments

On 1/31/2017 10:11 AM, Corentin Labbe wrote:
> This patch fix some typos in comments.
>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>

Acked-by: Giuseppe Cavallaro <peppe.cavallaro@...com>

> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c   |  6 +++---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 ++++++++--------
>  drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c |  2 +-
>  3 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
> index a414bde..3b1570d 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
> @@ -102,7 +102,7 @@ static void show_tx_process_state(unsigned int status)
>  		pr_debug("- TX (Stopped): Reset or Stop command\n");
>  		break;
>  	case 1:
> -		pr_debug("- TX (Running):Fetching the Tx desc\n");
> +		pr_debug("- TX (Running): Fetching the Tx desc\n");
>  		break;
>  	case 2:
>  		pr_debug("- TX (Running): Waiting for end of tx\n");
> @@ -136,7 +136,7 @@ static void show_rx_process_state(unsigned int status)
>  		pr_debug("- RX (Running): Fetching the Rx desc\n");
>  		break;
>  	case 2:
> -		pr_debug("- RX (Running):Checking for end of pkt\n");
> +		pr_debug("- RX (Running): Checking for end of pkt\n");
>  		break;
>  	case 3:
>  		pr_debug("- RX (Running): Waiting for Rx pkt\n");
> @@ -246,7 +246,7 @@ void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6],
>  	unsigned long data;
>
>  	data = (addr[5] << 8) | addr[4];
> -	/* For MAC Addr registers se have to set the Address Enable (AE)
> +	/* For MAC Addr registers we have to set the Address Enable (AE)
>  	 * bit that has no effect on the High Reg 0 where the bit 31 (MO)
>  	 * is RO.
>  	 */
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index bf2d8e6..ee71c07 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -216,7 +216,7 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv)
>  /**
>   * stmmac_hw_fix_mac_speed - callback for speed selection
>   * @priv: driver private structure
> - * Description: on some platforms (e.g. ST), some HW system configuraton
> + * Description: on some platforms (e.g. ST), some HW system configuration
>   * registers have to be set according to the link speed negotiated.
>   */
>  static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
> @@ -415,7 +415,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
>  /**
>   *  stmmac_hwtstamp_ioctl - control hardware timestamping.
>   *  @dev: device pointer.
> - *  @ifr: An IOCTL specefic structure, that can contain a pointer to
> + *  @ifr: An IOCTL specific structure, that can contain a pointer to
>   *  a proprietary structure used to pass information to the driver.
>   *  Description:
>   *  This function configures the MAC to enable/disable both outgoing(TX)
> @@ -1014,7 +1014,7 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i)
>   * @dev: net device structure
>   * @flags: gfp flag.
>   * Description: this function initializes the DMA RX/TX descriptors
> - * and allocates the socket buffers. It suppors the chained and ring
> + * and allocates the socket buffers. It supports the chained and ring
>   * modes.
>   */
>  static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
> @@ -2515,7 +2515,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
>  		if (unlikely(status == discard_frame)) {
>  			priv->dev->stats.rx_errors++;
>  			if (priv->hwts_rx_en && !priv->extend_desc) {
> -				/* DESC2 & DESC3 will be overwitten by device
> +				/* DESC2 & DESC3 will be overwritten by device
>  				 * with timestamp value, hence reinitialize
>  				 * them in stmmac_rx_refill() function so that
>  				 * device can reuse it.
> @@ -2538,7 +2538,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
>
>  			frame_len = priv->hw->desc->get_rx_frame_len(p, coe);
>
> -			/*  If frame length is greather than skb buffer size
> +			/*  If frame length is greater than skb buffer size
>  			 *  (preallocated during init) then the packet is
>  			 *  ignored
>  			 */
> @@ -2744,7 +2744,7 @@ static netdev_features_t stmmac_fix_features(struct net_device *dev,
>  	/* Some GMAC devices have a bugged Jumbo frame support that
>  	 * needs to have the Tx COE disabled for oversized frames
>  	 * (due to limited buffer sizes). In this case we disable
> -	 * the TX csum insertionin the TDES and not use SF.
> +	 * the TX csum insertion in the TDES and not use SF.
>  	 */
>  	if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
>  		features &= ~NETIF_F_CSUM_MASK;
> @@ -2971,7 +2971,7 @@ static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v)
>  		   (priv->dma_cap.hash_filter) ? "Y" : "N");
>  	seq_printf(seq, "\tMultiple MAC address registers: %s\n",
>  		   (priv->dma_cap.multi_addr) ? "Y" : "N");
> -	seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfatces): %s\n",
> +	seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfaces): %s\n",
>  		   (priv->dma_cap.pcs) ? "Y" : "N");
>  	seq_printf(seq, "\tSMA (MDIO) Interface: %s\n",
>  		   (priv->dma_cap.sma_mdio) ? "Y" : "N");
> @@ -3508,7 +3508,7 @@ int stmmac_resume(struct device *dev)
>  		priv->irq_wake = 0;
>  	} else {
>  		pinctrl_pm_select_default_state(priv->device);
> -		/* enable the clk prevously disabled */
> +		/* enable the clk previously disabled */
>  		clk_enable(priv->stmmac_clk);
>  		clk_enable(priv->pclk);
>  		/* reset the phy so that it's ready */
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index b0344c2..a1a469e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -198,7 +198,7 @@ int stmmac_mdio_reset(struct mii_bus *bus)
>
>  	/* This is a workaround for problems with the STE101P PHY.
>  	 * It doesn't complete its reset until at least one clock cycle
> -	 * on MDC, so perform a dummy mdio read. To be upadted for GMAC4
> +	 * on MDC, so perform a dummy mdio read. To be updated for GMAC4
>  	 * if needed.
>  	 */
>  	if (!priv->plat->has_gmac4)
>

Powered by blists - more mailing lists