netdev - [PATCH 06/17] net: stmmac: fix some code style problem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170131091152.13842-7-clabbe.montjoie@gmail.com>
Date:   Tue, 31 Jan 2017 10:11:41 +0100
From:   Corentin Labbe <clabbe.montjoie@...il.com>
To:     peppe.cavallaro@...com, alexandre.torgue@...com,
        netdev@...r.kernel.org
Cc:     davem@...emloft.net, linux-kernel@...r.kernel.org,
        Corentin Labbe <clabbe.montjoie@...il.com>
Subject: [PATCH 06/17] net: stmmac: fix some code style problem

Checkpatch complains about some code style problem on stmmac_mdio.c.
This patch fix them.

Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 3fdc6ec..c24bef2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -152,9 +152,9 @@ int stmmac_mdio_reset(struct mii_bus *bus)
 
 #ifdef CONFIG_OF
 	if (priv->device->of_node) {
-
 		if (data->reset_gpio < 0) {
 			struct device_node *np = priv->device->of_node;
+
 			if (!np)
 				return 0;
 
@@ -221,7 +221,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 		return 0;
 
 	new_bus = mdiobus_alloc();
-	if (new_bus == NULL)
+	if (!new_bus)
 		return -ENOMEM;
 
 	if (mdio_bus_data->irqs)
@@ -258,6 +258,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 	found = 0;
 	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
 		struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);
+
 		if (phydev) {
 			int act = 0;
 			char irq_num[4];
@@ -267,7 +268,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 			 * If an IRQ was provided to be assigned after
 			 * the bus probe, do it here.
 			 */
-			if ((mdio_bus_data->irqs == NULL) &&
+			if ((!mdio_bus_data->irqs) &&
 			    (mdio_bus_data->probed_phy_irq > 0)) {
 				new_bus->irq[addr] =
 					mdio_bus_data->probed_phy_irq;
-- 
2.10.2