| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170203181216.30214-2-antoine.tenart@free-electrons.com>
Date: Fri, 3 Feb 2017 19:12:09 +0100
From: Antoine Tenart <antoine.tenart@...e-electrons.com>
To: netdev@...r.kernel.org, davem@...emloft.net,
linux-arm-kernel@...ts.infradead.org
Cc: Antoine Tenart <antoine.tenart@...e-electrons.com>,
tsahee@...apurnalabs.com, rshitrit@...apurnalabs.com,
saeed@...apurnalabs.com, barak@...apurnalabs.com,
talz@...apurnalabs.com, thomas.petazzoni@...e-electrons.com,
arnd@...db.de
Subject: [PATCH net-next 1/8] alpine: add I/O fabric interrupt controller (iofic) helpers
All units connected to the I/O fabric share a common interrupt
controller interface, with the same architecture. This means there are
multiple interrupt controllers exposed, one per unit connected to the
I/O fabric, with the exact same interface.
One particularity of the Alpine platform is that units conencted to the
I/O fabric and their controllers (iofic, udma) are exposed as PCIe
endpoints and their registers are mapped through BARs.
This patch adds helpers for drivers supporting one unit connected to the
Alpine I/O fabric, to configure and use the per-unit exposed iofic.
Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
---
include/linux/soc/alpine/iofic.h | 165 +++++++++++++++++++++++++++++++++++++++
1 file changed, 165 insertions(+)
create mode 100644 include/linux/soc/alpine/iofic.h
diff --git a/include/linux/soc/alpine/iofic.h b/include/linux/soc/alpine/iofic.h
new file mode 100644
index 000000000000..d65b99e865ff
--- /dev/null
+++ b/include/linux/soc/alpine/iofic.h
@@ -0,0 +1,165 @@
+/*
+ * Annapurna Labs IOFIC helpers
+ *
+ * Copyright (C) 2017, Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __AL_IOFIC_H__
+#define __AL_IOFIC_H__
+
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define CTRL_GROUP(group) ((group) * 0x40)
+#define GROUP_INT_MODE(group, vector) (0x400 + (group) * 0x20 + (vector) * 0x8)
+
+#define INT_CAUSE_GROUP 0x0
+#define INT_MASK_GROUP 0x10
+#define INT_MASK_CLEAR_GROUP 0x18
+#define INT_CONTROL_GROUP 0x28
+#define INT_ABORT_MASK_GROUP 0x30
+
+#define INT_CONTROL_GRP_CLEAR_ON_READ BIT(0)
+#define INT_CONTROL_GRP_AUTO_MASK BIT(1)
+#define INT_CONTROL_GRP_AUTO_CLEAR BIT(2)
+#define INT_CONTROL_GRP_SET_ON_POSEDGE BIT(3)
+#define INT_CONTROL_GRP_MASK_MSI_X BIT(5)
+/* MSI-X AWID value, same ID for all cause bits */
+#define INT_CONTROL_GRP_MOD_RES_MASK 0xf000000
+#define INT_CONTROL_GRP_MOD_RES_SHIFT 0x18
+
+#define INT_MOD_INTV_MASK 0x000000ff
+#define INT_MOD_INTV_SHIFT 0x0
+
+
+/*
+ * Configure the interrupt controller registers, actual interrupts are still
+ * masked at this stage.
+ *
+ * @param regs_base regs pointer to interrupt controller registers
+ * @param group the interrupt group.
+ * @param flags flags of Interrupt Control Register
+ */
+
+static inline void al_iofic_config(void __iomem *base, int group, u32 flags)
+{
+ writel(flags, base + CTRL_GROUP(group) + INT_CONTROL_GROUP);
+}
+
+/*
+ * Configure the moderation timer resolution for a given group.
+ *
+ * Applies for both msix and legacy mode.
+ *
+ * @param regs_base pointer to unit registers
+ * @param group the interrupt group
+ * @param resolution resolution of the timer interval, the resolution determines
+ * the rate of decrementing the interval timer, setting value N means that the
+ * interval timer will be decremented each (N+1) * (0.68) micro seconds.
+ */
+static inline void al_iofic_moder_res_config(void __iomem *base, int group,
+ u8 resolution)
+{
+ u32 reg = readl(base + CTRL_GROUP(group) + INT_CONTROL_GROUP);
+
+ reg &= ~INT_CONTROL_GRP_MOD_RES_MASK;
+ reg |= resolution << INT_CONTROL_GRP_MOD_RES_SHIFT;
+
+ writel(reg, base + CTRL_GROUP(group) + INT_CONTROL_GROUP);
+}
+
+/*
+ * Configure the moderation timer interval for a given msix vector.
+ *
+ * @param regs_base pointer to unit registers
+ * @param group the interrupt group
+ * @param vector vector index
+ * @param interval interval between interrupts, 0 disable
+ */
+static inline void al_iofic_msix_moder_interval_config(void __iomem *base,
+ int group, u8 vector,
+ u8 interval)
+{
+ u32 reg = readl(base + GROUP_INT_MODE(group, vector));
+
+ reg &= ~INT_MOD_INTV_MASK;
+ reg |= interval << INT_MOD_INTV_SHIFT;
+
+ writel(reg, base + GROUP_INT_MODE(group, vector));
+}
+
+/*
+ * Unmask specific interrupts for a given group.
+ *
+ * This functions guarantees atomic operations, it is performance optimized as
+ * it will not require read-modify-write. The unmask done using the interrupt
+ * mask clear register, so it's safe to call it while the mask is changed by
+ * the HW (auto mask) or another core.
+ *
+ * @param regs_base pointer to unit registers
+ * @param group the interrupt group
+ * @param mask bitwise of interrupts to unmask, set bits will be unmasked.
+ */
+static inline void al_iofic_unmask(void __iomem *base, int group, u32 mask)
+{
+ /*
+ * use the mask clear register, no need to read the mask register
+ * itself. write 0 to unmask, 1 has no effect
+ */
+ writel(~mask, base + CTRL_GROUP(group) + INT_MASK_CLEAR_GROUP);
+}
+
+/*
+ * Mask specific interrupts for a given group.
+ *
+ * This functions modifies interrupt mask register, the callee must make sure
+ * the mask is not changed by another cpu.
+ *
+ * @param regs_base pointer to unit registers
+ * @param group the interrupt group
+ * @param mask bitwise of interrupts to mask, set bits will be masked.
+ */
+static inline void al_iofic_mask(void __iomem *base, int group, u32 mask)
+{
+ u32 reg = readl(base + CTRL_GROUP(group) + INT_MASK_GROUP);
+ reg |= mask;
+ writel(reg, base + CTRL_GROUP(group) + INT_MASK_GROUP);
+}
+
+/*
+ * Read interrupt cause register for a given group.
+ *
+ * This will clear the set bits if the clear on read mode is enabled.
+ *
+ * @param regs_base pointer to unit registers
+ * @param group the interrupt group
+ */
+static inline u32 al_iofic_read_cause(void __iomem *base, int group)
+{
+ return readl(base + CTRL_GROUP(group) + INT_CAUSE_GROUP);
+}
+
+/*
+ * Unmask specific interrupts from aborting the udma a given group.
+ *
+ * @param regs_base pointer to unit registers
+ * @param group the interrupt group
+ * @param mask bitwise of interrupts to mask
+ */
+static inline void al_iofic_abort_mask(void __iomem *base, int group, u32 mask)
+{
+ writel(mask, base + CTRL_GROUP(group) + INT_ABORT_MASK_GROUP);
+}
+
+/* return the offset of the unmask register for a given group */
+static inline u32 __iomem *al_iofic_unmask_offset_get(void __iomem *base,
+ int group)
+{
+ return base + CTRL_GROUP(group) + INT_MASK_CLEAR_GROUP;
+}
+
+#endif
--
2.11.0
Powered by blists - more mailing lists