| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1486468070-14596-1-git-send-email-tremyfr@gmail.com>
Date: Tue, 7 Feb 2017 12:47:50 +0100
From: Philippe Reynes <tremyfr@...il.com>
To: jeffrey.t.kirsher@...el.com, davem@...emloft.net
Cc: intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Philippe Reynes <tremyfr@...il.com>
Subject: [PATCH] net: intel: ixgbe: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@...il.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 166 ++++++++++++----------
1 files changed, 90 insertions(+), 76 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index ee28e54..77b3126 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -179,60 +179,62 @@ static u32 ixgbe_get_supported_10gtypes(struct ixgbe_hw *hw)
}
}
-static int ixgbe_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int ixgbe_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
ixgbe_link_speed supported_link;
bool autoneg = false;
+ u32 supported, advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&supported,
+ cmd->link_modes.supported);
hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg);
/* set the supported link speeds */
if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
- ecmd->supported |= ixgbe_get_supported_10gtypes(hw);
+ supported |= ixgbe_get_supported_10gtypes(hw);
if (supported_link & IXGBE_LINK_SPEED_1GB_FULL)
- ecmd->supported |= (ixgbe_isbackplane(hw->phy.media_type)) ?
+ supported |= (ixgbe_isbackplane(hw->phy.media_type)) ?
SUPPORTED_1000baseKX_Full :
SUPPORTED_1000baseT_Full;
if (supported_link & IXGBE_LINK_SPEED_100_FULL)
- ecmd->supported |= SUPPORTED_100baseT_Full;
+ supported |= SUPPORTED_100baseT_Full;
if (supported_link & IXGBE_LINK_SPEED_10_FULL)
- ecmd->supported |= SUPPORTED_10baseT_Full;
+ supported |= SUPPORTED_10baseT_Full;
/* default advertised speed if phy.autoneg_advertised isn't set */
- ecmd->advertising = ecmd->supported;
+ advertising = supported;
/* set the advertised speeds */
if (hw->phy.autoneg_advertised) {
- ecmd->advertising = 0;
+ advertising = 0;
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10_FULL)
- ecmd->advertising |= ADVERTISED_10baseT_Full;
+ advertising |= ADVERTISED_10baseT_Full;
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
- ecmd->advertising |= ADVERTISED_100baseT_Full;
+ advertising |= ADVERTISED_100baseT_Full;
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
- ecmd->advertising |= ecmd->supported & ADVRTSD_MSK_10G;
+ advertising |= supported & ADVRTSD_MSK_10G;
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) {
- if (ecmd->supported & SUPPORTED_1000baseKX_Full)
- ecmd->advertising |= ADVERTISED_1000baseKX_Full;
+ if (supported & SUPPORTED_1000baseKX_Full)
+ advertising |= ADVERTISED_1000baseKX_Full;
else
- ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ advertising |= ADVERTISED_1000baseT_Full;
}
} else {
if (hw->phy.multispeed_fiber && !autoneg) {
if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
- ecmd->advertising = ADVERTISED_10000baseT_Full;
+ advertising = ADVERTISED_10000baseT_Full;
}
}
if (autoneg) {
- ecmd->supported |= SUPPORTED_Autoneg;
- ecmd->advertising |= ADVERTISED_Autoneg;
- ecmd->autoneg = AUTONEG_ENABLE;
+ supported |= SUPPORTED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;
+ cmd->base.autoneg = AUTONEG_ENABLE;
} else
- ecmd->autoneg = AUTONEG_DISABLE;
-
- ecmd->transceiver = XCVR_EXTERNAL;
+ cmd->base.autoneg = AUTONEG_DISABLE;
/* Determine the remaining settings based on the PHY type. */
switch (adapter->hw.phy.type) {
@@ -241,14 +243,14 @@ static int ixgbe_get_settings(struct net_device *netdev,
case ixgbe_phy_x550em_ext_t:
case ixgbe_phy_fw:
case ixgbe_phy_cu_unknown:
- ecmd->supported |= SUPPORTED_TP;
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->port = PORT_TP;
+ supported |= SUPPORTED_TP;
+ advertising |= ADVERTISED_TP;
+ cmd->base.port = PORT_TP;
break;
case ixgbe_phy_qt:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_FIBRE;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_FIBRE;
break;
case ixgbe_phy_nl:
case ixgbe_phy_sfp_passive_tyco:
@@ -266,9 +268,9 @@ static int ixgbe_get_settings(struct net_device *netdev,
case ixgbe_sfp_type_da_cu:
case ixgbe_sfp_type_da_cu_core0:
case ixgbe_sfp_type_da_cu_core1:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_DA;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_DA;
break;
case ixgbe_sfp_type_sr:
case ixgbe_sfp_type_lr:
@@ -278,99 +280,110 @@ static int ixgbe_get_settings(struct net_device *netdev,
case ixgbe_sfp_type_1g_sx_core1:
case ixgbe_sfp_type_1g_lx_core0:
case ixgbe_sfp_type_1g_lx_core1:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_FIBRE;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_FIBRE;
break;
case ixgbe_sfp_type_not_present:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_NONE;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_NONE;
break;
case ixgbe_sfp_type_1g_cu_core0:
case ixgbe_sfp_type_1g_cu_core1:
- ecmd->supported |= SUPPORTED_TP;
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->port = PORT_TP;
+ supported |= SUPPORTED_TP;
+ advertising |= ADVERTISED_TP;
+ cmd->base.port = PORT_TP;
break;
case ixgbe_sfp_type_unknown:
default:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_OTHER;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_OTHER;
break;
}
break;
case ixgbe_phy_xaui:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_NONE;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_NONE;
break;
case ixgbe_phy_unknown:
case ixgbe_phy_generic:
case ixgbe_phy_sfp_unsupported:
default:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_OTHER;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_OTHER;
break;
}
/* Indicate pause support */
- ecmd->supported |= SUPPORTED_Pause;
+ supported |= SUPPORTED_Pause;
switch (hw->fc.requested_mode) {
case ixgbe_fc_full:
- ecmd->advertising |= ADVERTISED_Pause;
+ advertising |= ADVERTISED_Pause;
break;
case ixgbe_fc_rx_pause:
- ecmd->advertising |= ADVERTISED_Pause |
+ advertising |= ADVERTISED_Pause |
ADVERTISED_Asym_Pause;
break;
case ixgbe_fc_tx_pause:
- ecmd->advertising |= ADVERTISED_Asym_Pause;
+ advertising |= ADVERTISED_Asym_Pause;
break;
default:
- ecmd->advertising &= ~(ADVERTISED_Pause |
+ advertising &= ~(ADVERTISED_Pause |
ADVERTISED_Asym_Pause);
}
if (netif_carrier_ok(netdev)) {
switch (adapter->link_speed) {
case IXGBE_LINK_SPEED_10GB_FULL:
- ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ cmd->base.speed = SPEED_10000;
break;
case IXGBE_LINK_SPEED_2_5GB_FULL:
- ethtool_cmd_speed_set(ecmd, SPEED_2500);
+ cmd->base.speed = SPEED_2500;
break;
case IXGBE_LINK_SPEED_1GB_FULL:
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ cmd->base.speed = SPEED_1000;
break;
case IXGBE_LINK_SPEED_100_FULL:
- ethtool_cmd_speed_set(ecmd, SPEED_100);
+ cmd->base.speed = SPEED_100;
break;
case IXGBE_LINK_SPEED_10_FULL:
- ethtool_cmd_speed_set(ecmd, SPEED_10);
+ cmd->base.speed = SPEED_10;
break;
default:
break;
}
- ecmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
} else {
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}
-static int ixgbe_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int ixgbe_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
u32 advertised, old;
s32 err = 0;
+ u32 supported, advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&supported,
+ cmd->link_modes.supported);
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
if ((hw->phy.media_type == ixgbe_media_type_copper) ||
(hw->phy.multispeed_fiber)) {
@@ -378,12 +391,12 @@ static int ixgbe_set_settings(struct net_device *netdev,
* this function does not support duplex forcing, but can
* limit the advertising of the adapter to the specified speed
*/
- if (ecmd->advertising & ~ecmd->supported)
+ if (advertising & ~supported)
return -EINVAL;
/* only allow one speed at a time if no autoneg */
- if (!ecmd->autoneg && hw->phy.multispeed_fiber) {
- if (ecmd->advertising ==
+ if (!cmd->base.autoneg && hw->phy.multispeed_fiber) {
+ if (advertising ==
(ADVERTISED_10000baseT_Full |
ADVERTISED_1000baseT_Full))
return -EINVAL;
@@ -391,16 +404,16 @@ static int ixgbe_set_settings(struct net_device *netdev,
old = hw->phy.autoneg_advertised;
advertised = 0;
- if (ecmd->advertising & ADVERTISED_10000baseT_Full)
+ if (advertising & ADVERTISED_10000baseT_Full)
advertised |= IXGBE_LINK_SPEED_10GB_FULL;
- if (ecmd->advertising & ADVERTISED_1000baseT_Full)
+ if (advertising & ADVERTISED_1000baseT_Full)
advertised |= IXGBE_LINK_SPEED_1GB_FULL;
- if (ecmd->advertising & ADVERTISED_100baseT_Full)
+ if (advertising & ADVERTISED_100baseT_Full)
advertised |= IXGBE_LINK_SPEED_100_FULL;
- if (ecmd->advertising & ADVERTISED_10baseT_Full)
+ if (advertising & ADVERTISED_10baseT_Full)
advertised |= IXGBE_LINK_SPEED_10_FULL;
if (old == advertised)
@@ -418,10 +431,11 @@ static int ixgbe_set_settings(struct net_device *netdev,
clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
} else {
/* in this case we currently only support 10Gb/FULL */
- u32 speed = ethtool_cmd_speed(ecmd);
- if ((ecmd->autoneg == AUTONEG_ENABLE) ||
- (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
- (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+ u32 speed = cmd->base.speed;
+
+ if ((cmd->base.autoneg == AUTONEG_ENABLE) ||
+ (advertising != ADVERTISED_10000baseT_Full) ||
+ (speed + cmd->base.duplex != SPEED_10000 + DUPLEX_FULL))
return -EINVAL;
}
@@ -3343,8 +3357,6 @@ static int ixgbe_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
}
static const struct ethtool_ops ixgbe_ethtool_ops = {
- .get_settings = ixgbe_get_settings,
- .set_settings = ixgbe_set_settings,
.get_drvinfo = ixgbe_get_drvinfo,
.get_regs_len = ixgbe_get_regs_len,
.get_regs = ixgbe_get_regs,
@@ -3381,6 +3393,8 @@ static int ixgbe_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
.get_ts_info = ixgbe_get_ts_info,
.get_module_info = ixgbe_get_module_info,
.get_module_eeprom = ixgbe_get_module_eeprom,
+ .get_link_ksettings = ixgbe_get_link_ksettings,
+ .set_link_ksettings = ixgbe_set_link_ksettings,
};
void ixgbe_set_ethtool_ops(struct net_device *netdev)
--
1.7.4.4
Powered by blists - more mailing lists