[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170209004309.1225-1-gvaradar@cisco.com>
Date: Wed, 8 Feb 2017 16:43:06 -0800
From: Govindarajulu Varadarajan <gvaradar@...co.com>
To: davem@...emloft.net, netdev@...r.kernel.org
Cc: benve@...co.com, Govindarajulu Varadarajan <gvaradar@...co.com>
Subject: [PATCH 0/3 v2 net-next] enic: add vxlan offload support
This series adds vxlan offload support for enic driver. The first
patch adds vxlan devcmd for configuring vxland offload parameters.
Second patch adds ndo_udp_tunnel_add/del and offload on rx path.
There are to modes in which fw supports vxlan offload.
mode 0: fcoe bit is set for encapsulated packet. fcoe_fc_crc_ok is set
if checksum of csum is ok. This bit is or of ip_csum_ok and
tcp_udp_csum_ok
mode 2: BIT(0) in rss_hash is set if it is encapsulated packet.
BIT(1) is set if outer_ip_csum_ok/
BIT(2) is set if outer_tcp_csum_ok
Some hw supports only mode 0, some support mode 0 and 2. Driver gets
the supported modes bitmap using get_supported_feature_ver devcmd
and selects the highest mode both driver and fw supports.
Third patch adds offload support on tx path by adding
enic_features_check().
v2: Order local variable declarations from longest to shortest line,
on all three patches.
Govindarajulu Varadarajan (3):
enic: add devcmds for vxlan offload
enic: add udp_tunnel ndo for vxlan offload
enic: add vxlan offload on tx path
drivers/net/ethernet/cisco/enic/enic.h | 6 +
drivers/net/ethernet/cisco/enic/enic_main.c | 282 ++++++++++++++++++++++++--
drivers/net/ethernet/cisco/enic/vnic_dev.c | 34 ++++
drivers/net/ethernet/cisco/enic/vnic_dev.h | 5 +
drivers/net/ethernet/cisco/enic/vnic_devcmd.h | 51 +++++
drivers/net/ethernet/cisco/enic/vnic_enet.h | 1 +
6 files changed, 364 insertions(+), 15 deletions(-)
--
2.11.0
Powered by blists - more mailing lists