netdev - Autoneg off in TI cpsw driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAH9_wRMwiZA6GxdwMbOZjs-t-hnMaCRB1RSQ6nGoLOUJ+PxzRw@mail.gmail.com>
Date:   Fri, 17 Feb 2017 00:01:32 +0530
From:   Sriram V <vshrirama@...il.com>
To:     netdev@...r.kernel.org
Cc:     mugunthanvnm@...com
Subject: Autoneg off in TI cpsw driver

Hi,

I am using a Linux Kernel 4.1 Kernel. on AM437X with dual emac configuration.

What i find is if i do the following the Link does not come up.

1. run ethtool -s eth1 speed 10 duplex full autoneg off
2. remove cable
3. plug it in.

With the above sequence. The link does not come up. the plug in is not detected

Am i missing something or is this the default behaviour.

Regards,
Sriram