Message-Id: <1487824932-5105-4-git-send-email-chenbofeng.kernel@gmail.com>
Date:   Wed, 22 Feb 2017 20:42:12 -0800
From:   Chenbo Feng <chenbofeng.kernel@...il.com>
To:     netdev@...r.kernel.org, Alexei Starovoitov <ast@...com>,
        Daniel Borkmann <daniel@...earbox.net>
Cc:     Lorenzo Colitti <lorenzo@...gle.com>,
        Willem de Bruijn <willemb@...gle.com>,
        Chenbo Feng <fengc@...gle.com>,
        Chenbo Feng <chenbofeng.kernel@...il.com>
Subject: [PATCH net-next v3 3/3] A Sample of using socket cookie and uid for traffic monitoring

From: Chenbo Feng <fengc@...gle.com>

Add a sample program to demostrate the possible usage of
get_socket_cookie and get_socket_uid helper function. The program will
store bytes and packets counting of in/out traffic monitored by iptable
and store the stats in a bpf map in per socket base. The owner uid of
the socket will be stored as part of the data entry. A shell script for
running the program is also included.

Change since V2:
Add the example code and the shell script to run the program.

Signed-off-by: Chenbo Feng <chenbofeng.kernel@...il.com>
---
 samples/bpf/cookie_uid_helper_example.c      | 225 +++++++++++++++++++++++++++
 samples/bpf/run_cookie_uid_helper_example.sh |  14 ++
 2 files changed, 239 insertions(+)
 create mode 100644 samples/bpf/cookie_uid_helper_example.c
 create mode 100755 samples/bpf/run_cookie_uid_helper_example.sh

diff --git a/samples/bpf/cookie_uid_helper_example.c b/samples/bpf/cookie_uid_helper_example.c
new file mode 100644
index 0000000..ffa4740
--- /dev/null
+++ b/samples/bpf/cookie_uid_helper_example.c
@@ -0,0 +1,225 @@
+/* This test is a demo of using get_socket_uid and get_socket_cookie
+ * helper function to do per socket based network traffic monitoring.
+ * It requires iptable version higher then 1.6.1. to load pined eBPF
+ * program into the xt_bpf match.
+ *
+ * Compile:
+ * gcc -I ../../usr/include -I ../../tools/lib -I ../../tools/include \
+ * -I ./ -Wall cookie_uid_helper_example.c ../../tools/lib/bpf/bpf.c -o \
+ * perSocketStats_example
+ *
+ * TEST:
+ * ./run_cookie_uid_helper_example.sh
+ * Then generate some traffic in variate ways. ping 0 -c 10 would work
+ * but the cookie and uid in this case could both be 0. A sample output
+ * with some traffic generated by web browser is shown below:
+ *
+ * cookie: 877, uid: 0x3e8, Pakcet Count: 20, Bytes Count: 11058
+ *
+ * cookie: 132, uid: 0x0, Pakcet Count: 2, Bytes Count: 286
+ * cookie: 812, uid: 0x3e8, Pakcet Count: 3, Bytes Count: 1726
+ * cookie: 802, uid: 0x3e8, Pakcet Count: 2, Bytes Count: 104
+ * cookie: 877, uid: 0x3e8, Pakcet Count: 20, Bytes Count: 11058
+ * cookie: 831, uid: 0x3e8, Pakcet Count: 2, Bytes Count: 104
+ * cookie: 0, uid: 0x0, Pakcet Count: 6, Bytes Count: 712
+ * cookie: 880, uid: 0xfffe, Pakcet Count: 1, Bytes Count: 70
+ *
+ * Clean up: if using shell script, the script file will delete the iptables
+ * rule and unmount the bpf program when exit. Else the iptables rule need
+ * to be deleted using:
+ *   iptables -D INPUT -m bpf --object-pinned ${mnt_dir}/bpf_prog -j ACCEPT
+ */
+
+#define _GNU_SOURCE
+
+#define offsetof(type, member)	__builtin_offsetof(type, member)
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <limits.h>
+#include <linux/bpf.h>
+#include <linux/if_ether.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <bpf/bpf.h>
+#include "libbpf.h"
+
+struct stats {
+	uint32_t uid;
+	uint64_t packets;
+	uint64_t bytes;
+};
+
+static int map_fd, prog_fd;
+
+static void maps_create(void)
+{
+	map_fd = bpf_create_map(BPF_MAP_TYPE_HASH, sizeof(uint32_t),
+				sizeof(struct stats), 100, 0);
+	if (map_fd < 0)
+		error(1, errno, "map create failed!\n");
+}
+
+static void prog_load(void)
+{
+	static char log_buf[1 << 16];
+
+	struct bpf_insn prog[] = {
+		/*
+		 * it for future usage. value stored in R6 to R10 will not be
+		 * reset after a bpf helper function call.
+		 */
+		BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+		/*
+		 * pc1: BPF_FUNC_get_socket_cookie takes one parameter,
+		 * R1: sk_buff
+		 */
+		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				BPF_FUNC_get_socket_cookie),
+		/* pc2-4: save &socketCookie to r7 for future usage*/
+		BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_0, -8),
+		BPF_MOV64_REG(BPF_REG_7, BPF_REG_10),
+		BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8),
+		/*
+		 * pc5-8: set up the registers for BPF_FUNC_map_lookup_elem,
+		 * it takes two parameters (R1: map_fd,  R2: &socket_cookie)
+		 */
+		BPF_LD_MAP_FD(BPF_REG_1, map_fd),
+		BPF_MOV64_REG(BPF_REG_2, BPF_REG_7),
+		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				BPF_FUNC_map_lookup_elem),
+		/*
+		 * pc9. if r0 != 0x0, go to pc+14, since we have the cookie
+		 * stored already
+		 * Otherwise do pc10-22 to setup a new data entry.
+		 */
+		BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 14),
+		BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),
+		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				BPF_FUNC_get_socket_uid),
+		/*
+		 * Place a struct stats in the R10 stack and sequentially
+		 * place the member value into the memory. Packets value
+		 * is set by directly place a IMM value 1 into the stack.
+		 */
+		BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_0,
+				-32 + offsetof(struct stats, uid)),
+		BPF_ST_MEM(BPF_DW, BPF_REG_10,
+				-32 + offsetof(struct stats, packets), 1),
+		/*
+		 * __sk_buff is a special struct used for eBPF program to
+		 * directly access some sk_buff field.
+		 */
+		BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_6,
+				offsetof(struct __sk_buff, len)),
+		BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_1,
+				-32 + offsetof(struct stats, bytes)),
+		/*
+		 * add new map entry using BPF_FUNC_map_update_elem, it takes
+		 * 4 parameters (R1: map_fd, R2: &socket_cookie, R3: &stats)
+		 */
+		BPF_LD_MAP_FD(BPF_REG_1, map_fd),
+		BPF_MOV64_REG(BPF_REG_2, BPF_REG_7),
+		BPF_MOV64_REG(BPF_REG_3, BPF_REG_10),
+		BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, -32),
+		BPF_MOV64_IMM(BPF_REG_4, 0),
+		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				BPF_FUNC_map_update_elem),
+		BPF_JMP_IMM(BPF_JA, 0, 0, 5),
+		/*
+		 * pc24-30 update the packet info to a exist data entry, it can
+		 * be done by directly write to pointers instead of using
+		 * BPF_FUNC_map_update_elem helper function
+		 */
+		BPF_MOV64_REG(BPF_REG_9, BPF_REG_0),
+		BPF_MOV64_IMM(BPF_REG_1, 1),
+		BPF_RAW_INSN(BPF_STX | BPF_XADD | BPF_DW, BPF_REG_9, BPF_REG_1,
+				offsetof(struct stats, packets), 0),
+		BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_6,
+				offsetof(struct __sk_buff, len)),
+		BPF_RAW_INSN(BPF_STX | BPF_XADD | BPF_DW, BPF_REG_9, BPF_REG_1,
+					  offsetof(struct stats, bytes), 0),
+		BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_6,
+				offsetof(struct __sk_buff, len)),
+		BPF_EXIT_INSN(),
+	};
+	prog_fd = bpf_load_program(BPF_PROG_TYPE_SOCKET_FILTER, prog,
+					ARRAY_SIZE(prog), "GPL", 0,
+					log_buf, sizeof(log_buf));
+	if (prog_fd < 0)
+		error(1, errno, "failed to load prog\n%s\n", log_buf);
+}
+
+static void prog_attach_iptables(char *file)
+{
+	int ret;
+	char rules[100];
+
+	if (bpf_obj_pin(prog_fd, file))
+		error(1, errno, "bpf_obj_pin");
+	sprintf(rules, "iptables -A INPUT -m bpf --object-pinned %s -j ACCEPT",
+		file);
+	ret = system(rules);
+	if (ret < 0) {
+		printf("iptable rule update failed: %d/n", WEXITSTATUS(ret));
+		exit(1);
+	}
+}
+
+static void print_table(void)
+{
+	struct stats curEntry;
+	uint32_t curN = UINT32_MAX;
+	uint32_t nextN, res;
+
+	while (bpf_map_get_next_key(map_fd, &curN, &nextN) > -1) {
+		curN = nextN;
+		res = bpf_map_lookup_elem(map_fd, &curN, &curEntry);
+		if (res < 0) {
+			error(1, errno, "fail to get entry value of Key: %u\n",
+				curN);
+		} else {
+			printf("cookie: %u, uid: 0x%x, Pakcet Count: %lu,"
+				" Bytes Count: %lu\n", curN, curEntry.uid,
+				curEntry.packets, curEntry.bytes);
+		}
+	}
+}
+
+int main(int argc, char *argv[])
+{
+	if (argc > 2) {
+		printf("Too many argument provided\n");
+		return 1;
+	} else if (argc < 2) {
+		printf("Usage: %s bpfObjName\n", argv[0]);
+		return 1;
+	}
+
+	maps_create();
+	prog_load();
+	prog_attach_iptables(argv[1]);
+
+	while (true) {
+		print_table();
+		printf("\n");
+		sleep(1);
+	};
+
+	return 0;
+}
+
+
+
+
+
+
diff --git a/samples/bpf/run_cookie_uid_helper_example.sh b/samples/bpf/run_cookie_uid_helper_example.sh
new file mode 100755
index 0000000..a7a6208
--- /dev/null
+++ b/samples/bpf/run_cookie_uid_helper_example.sh
@@ -0,0 +1,14 @@
+#!/bin/bash
+local_dir="$(pwd)"
+root_dir=$local_dir/../..
+mnt_dir=/sys/fs/bpf
+
+on_exit() {
+  iptables -D INPUT -m bpf --object-pinned ${mnt_dir}/bpf_prog -j ACCEPT
+  umount ${mnt_dir}
+}
+
+trap on_exit EXIT
+mkdir -p ${mnt_dir}
+mount -t bpf bpf ${mnt_dir}
+./perSocketStats_example ${mnt_dir}/bpf_prog
-- 
2.7.4

Powered by blists - more mailing lists