| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 24 Feb 2017 12:02:19 +0530
From: Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
To: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>
CC: <f.fainelli@...il.com>, <Allan.Nielsen@...rosemi.com>,
<andrew@...n.ch>, <robh@...nel.org>,
Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
Subject: [PATCH v1 net] net: phy: Fix LED mode in DT single property.
From: Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
Fix the LED mode DT parameters combine to a single property
and change the vendor prefix i.e. mscc.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
---
Change set:
v0: Fix the LED mode DT parameters combine to a single property
v1: Fix the build test ERROR
.../devicetree/bindings/net/mscc-phy-vsc8531.txt | 20 +++-----
drivers/net/phy/mscc.c | 57 ++++++++++++----------
2 files changed, 40 insertions(+), 37 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
index 0eedabe..2253de5 100644
--- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
+++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
@@ -6,12 +6,12 @@ Required properties:
Documentation/devicetree/bindings/net/phy.txt
Optional properties:
-- vsc8531,vddmac : The vddmac in mV. Allowed values is listed
+- mscc,vddmac : The vddmac in mV. Allowed values is listed
in the first row of Table 1 (below).
This property is only used in combination
with the 'edge-slowdown' property.
Default value is 3300.
-- vsc8531,edge-slowdown : % the edge should be slowed down relative to
+- mscc,edge-slowdown : % the edge should be slowed down relative to
the fastest possible edge time.
Edge rate sets the drive strength of the MAC
interface output signals. Changing the
@@ -27,14 +27,11 @@ Optional properties:
'vddmac'.
Default value is 0%.
Ref: Table:1 - Edge rate change (below).
-- vsc8531,led-0-mode : LED mode. Specify how the LED[0] should behave.
+- mscc,led-mode : LED mode. Specify how the LED[0] and LED[1] should behave.
Allowed values are define in
"include/dt-bindings/net/mscc-phy-vsc8531.h".
- Default value is VSC8531_LINK_1000_ACTIVITY (1).
-- vsc8531,led-1-mode : LED mode. Specify how the LED[1] should behave.
- Allowed values are define in
- "include/dt-bindings/net/mscc-phy-vsc8531.h".
- Default value is VSC8531_LINK_100_ACTIVITY (2).
+ Default LED[0] value is VSC8531_LINK_1000_ACTIVITY (1).
+ Default LED[1] value is VSC8531_LINK_100_ACTIVITY (2).
Table: 1 - Edge rate change
----------------------------------------------------------------|
@@ -66,8 +63,7 @@ Example:
vsc8531_0: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.0570";
- vsc8531,vddmac = <3300>;
- vsc8531,edge-slowdown = <7>;
- vsc8531,led-0-mode = <LINK_1000_ACTIVITY>;
- vsc8531,led-1-mode = <LINK_100_ACTIVITY>;
+ mscc,vddmac = /bits/ 16 <3300>;
+ mscc,edge-slowdown = /bits/ 8 <7>;
+ mscc,led-mode = <LINK_1000_ACTIVITY LINK_100_ACTIVITY>;
};
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 650c266..dc35a90 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -385,11 +385,11 @@ static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
if (!of_node)
return -ENODEV;
- rc = of_property_read_u16(of_node, "vsc8531,vddmac", &vdd);
+ rc = of_property_read_u16(of_node, "mscc,vddmac", &vdd);
if (rc != 0)
vdd = MSCC_VDDMAC_3300;
- rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown", &sd);
+ rc = of_property_read_u8(of_node, "mscc,edge-slowdown", &sd);
if (rc != 0)
sd = 0;
@@ -402,26 +402,43 @@ static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
return -EINVAL;
}
-static int vsc85xx_dt_led_mode_get(struct phy_device *phydev,
- char *led,
- u8 default_mode)
+static int vsc85xx_dt_led_mode_get(struct phy_device *phydev, char *led)
{
struct device *dev = &phydev->mdio.dev;
struct device_node *of_node = dev->of_node;
- u8 led_mode;
- int err;
+ struct vsc8531_private *vsc8531 = phydev->priv;
+ u8 led_0_mode = VSC8531_LINK_1000_ACTIVITY;
+ u8 led_1_mode = VSC8531_LINK_100_ACTIVITY;
+ const __be32 *paddr_end;
+ const __be32 *paddr;
+ int len;
if (!of_node)
return -ENODEV;
- led_mode = default_mode;
- err = of_property_read_u8(of_node, led, &led_mode);
- if (!err && (led_mode > 15 || led_mode == 7 || led_mode == 11)) {
- phydev_err(phydev, "DT %s invalid\n", led);
+ paddr = of_get_property(of_node, "mscc,led-mode", &len);
+ if (!paddr)
return -EINVAL;
+
+ paddr_end = paddr + (len /= sizeof(*paddr));
+ while (paddr + 1 < paddr_end) {
+ led_0_mode = be32_to_cpup(paddr++);
+ led_1_mode = be32_to_cpup(paddr++);
}
- return led_mode;
+ if (!len && (led_0_mode > 15 || led_0_mode == 7 || led_0_mode == 11)) {
+ phydev_err(phydev, "DT %s-0 invalid\n", led);
+ return -EINVAL;
+ }
+ vsc8531->led_0_mode = led_0_mode;
+
+ if (!len && (led_1_mode > 15 || led_1_mode == 7 || led_1_mode == 11)) {
+ phydev_err(phydev, "DT %s-1 invalid\n", led);
+ return -EINVAL;
+ }
+ vsc8531->led_1_mode = led_1_mode;
+
+ return 0;
}
#else
@@ -430,11 +447,9 @@ static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
return 0;
}
-static int vsc85xx_dt_led_mode_get(struct phy_device *phydev,
- char *led,
- u8 default_mode)
+static int vsc85xx_dt_led_mode_get(struct phy_device *phydev, char *led)
{
- return default_mode;
+ return 0;
}
#endif /* CONFIG_OF_MDIO */
@@ -641,17 +656,9 @@ static int vsc85xx_probe(struct phy_device *phydev)
vsc8531->rate_magic = rate_magic;
/* LED[0] and LED[1] mode */
- led_mode = vsc85xx_dt_led_mode_get(phydev, "vsc8531,led-0-mode",
- VSC8531_LINK_1000_ACTIVITY);
- if (led_mode < 0)
- return led_mode;
- vsc8531->led_0_mode = led_mode;
-
- led_mode = vsc85xx_dt_led_mode_get(phydev, "vsc8531,led-1-mode",
- VSC8531_LINK_100_ACTIVITY);
+ led_mode = vsc85xx_dt_led_mode_get(phydev, "mscc,led-mode");
if (led_mode < 0)
return led_mode;
- vsc8531->led_1_mode = led_mode;
return 0;
}
--
2.7.4
Powered by blists - more mailing lists