[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170224121440.32269-3-luiz.dentz@gmail.com>
Date: Fri, 24 Feb 2017 14:14:36 +0200
From: Luiz Augusto von Dentz <luiz.dentz@...il.com>
To: linux-bluetooth@...r.kernel.org
Cc: patrik.flykt@...ux.intel.com, jukka.rissanen@...ux.intel.com,
stefan@....samsung.com, aar@...gutronix.de,
linux-wpan@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH v5 2/6] 6lowpan: Set MAC address length according to LOWPAN_LLTYPE
From: Patrik Flykt <patrik.flykt@...ux.intel.com>
Set MAC address length according to the 6LoWPAN link layer in use.
Bluetooth Low Energy uses 48 bit addressing while IEEE802.15.4 uses
64 bits.
Signed-off-by: Patrik Flykt <patrik.flykt@...ux.intel.com>
Reviewed-by: Stefan Schmidt <stefan@....samsung.com>
---
net/6lowpan/core.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/net/6lowpan/core.c b/net/6lowpan/core.c
index 5945f7e..5f9909a 100644
--- a/net/6lowpan/core.c
+++ b/net/6lowpan/core.c
@@ -23,7 +23,16 @@ int lowpan_register_netdevice(struct net_device *dev,
{
int i, ret;
- dev->addr_len = EUI64_ADDR_LEN;
+ switch (lltype) {
+ case LOWPAN_LLTYPE_IEEE802154:
+ dev->addr_len = EUI64_ADDR_LEN;
+ break;
+
+ case LOWPAN_LLTYPE_BTLE:
+ dev->addr_len = ETH_ALEN;
+ break;
+ }
+
dev->type = ARPHRD_6LOWPAN;
dev->mtu = IPV6_MIN_MTU;
dev->priv_flags |= IFF_NO_QUEUE;
--
2.9.3
Powered by blists - more mailing lists