| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <a0ca37b5464af84c370e2f0bf25e88cd981e7382.1489055407.git.jpinto@synopsys.com>
Date: Thu, 9 Mar 2017 16:00:46 +0000
From: Joao Pinto <Joao.Pinto@...opsys.com>
To: davem@...emloft.net
Cc: peppe.cavallaro@...com, alexandre.torgue@...com,
niklas.cassel@...s.com, netdev@...r.kernel.org,
Joao Pinto <Joao.Pinto@...opsys.com>
Subject: [PATCH v4 net-next 1/9] net: stmicro: multiple queues dt configuration
This patch adds the multiple queues configuration in the Device Tree.
It was also created a set of structures to keep the RX and TX queues
configurations to be used in the driver.
Signed-off-by: Joao Pinto <jpinto@...opsys.com>
---
Changes v2->v4:
- Just to keep up with patch-set version
Changes v1->v2:
- RX and TX queues child nodes had bad handle
Documentation/devicetree/bindings/net/stmmac.txt | 40 ++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 91 ++++++++++++++++++++++
include/linux/stmmac.h | 30 +++++++
3 files changed, 161 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index d3bfc2b..4107e67 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -72,6 +72,27 @@ Optional properties:
- snps,mb: mixed-burst
- snps,rb: rebuild INCRx Burst
- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
+- Multiple RX Queues parameters: below the list of all the parameters to
+ configure the multiple RX queues:
+ - snps,rx-queues-to-use: number of RX queues to be used in the driver
+ - Choose one of these RX scheduling algorithms:
+ - snps,rx-sched-sp: Strict priority
+ - snps,rx-sched-wsp: Weighted Strict priority
+ - For each RX queue
+ - Choose one of these modes:
+ - snps,dcb-algorithm: Queue to be enabled as DCB
+ - snps,avb-algorithm: Queue to be enabled as AVB
+ - snps,map-to-dma-channel: Channel to map
+- Multiple TX Queues parameters: below the list of all the parameters to
+ configure the multiple TX queues:
+ - snps,tx-queues-to-use: number of TX queues to be used in the driver
+ - Choose one of these TX scheduling algorithms:
+ - snps,tx-sched-wrr: Weighted Round Robin
+ - snps,tx-sched-wfq: Weighted Fair Queuing
+ - snps,tx-sched-dwrr: Deficit Weighted Round Robin
+ - snps,tx-sched-sp: Strict priority
+ - For each TX queue
+ - snps,weight: TX queue weight (if using a weighted algorithm)
Examples:
@@ -81,6 +102,23 @@ Examples:
snps,blen = <256 128 64 32 0 0 0>;
};
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x10>;
+ };
+ };
+
gmac0: ethernet@...00000 {
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
@@ -104,4 +142,6 @@ Examples:
phy1: ethernet-phy@0 {
};
};
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 433a842..ff6af8d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -132,6 +132,95 @@ static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
}
/**
+ * stmmac_mtl_setup - parse DT parameters for multiple queues configuration
+ * @pdev: platform device
+ */
+static void stmmac_mtl_setup(struct platform_device *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ struct device_node *q_node;
+ struct device_node *rx_node;
+ struct device_node *tx_node;
+ u8 queue = 0;
+
+ rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0);
+ if (!rx_node)
+ return;
+
+ tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0);
+ if (!tx_node) {
+ of_node_put(rx_node);
+ return;
+ }
+
+ /* Processing RX queues common config */
+ if (of_property_read_u8(rx_node, "snps,rx-queues-to-use",
+ &plat->rx_queues_to_use))
+ plat->rx_queues_to_use = 1;
+
+ if (of_property_read_bool(rx_node, "snps,rx-sched-sp"))
+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
+ else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp"))
+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP;
+ else
+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
+
+ /* Processing individual RX queue config */
+ for_each_child_of_node(rx_node, q_node) {
+ if (queue >= plat->rx_queues_to_use)
+ break;
+
+ if (of_property_read_bool(q_node, "snps,dcb-algorithm"))
+ plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_DCB;
+ else if (of_property_read_bool(q_node, "snps,avb-algorithm"))
+ plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_AVB;
+ else
+ plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_DCB;
+
+ if (of_property_read_u8(q_node, "snps,map-to-dma-channel",
+ &plat->rx_queues_cfg[queue].chan))
+ plat->rx_queues_cfg[queue].chan = queue;
+ /* TODO: Dynamic mapping to be included in the future */
+
+ queue++;
+ }
+
+ /* Processing TX queues common config */
+ if (of_property_read_u8(tx_node, "snps,tx-queues-to-use",
+ &plat->tx_queues_to_use))
+ plat->tx_queues_to_use = 1;
+
+ if (of_property_read_bool(tx_node, "snps,tx-sched-wrr"))
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
+ else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq"))
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ;
+ else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr"))
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR;
+ else if (of_property_read_bool(tx_node, "snps,tx-sched-sp"))
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;
+ else
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;
+
+ queue = 0;
+
+ /* Processing individual TX queue config */
+ for_each_child_of_node(tx_node, q_node) {
+ if (queue >= plat->tx_queues_to_use)
+ break;
+
+ if (of_property_read_u8(q_node, "snps,weight",
+ &plat->tx_queues_cfg[queue].weight))
+ plat->tx_queues_cfg[queue].weight = 0x10 + queue;
+
+ queue++;
+ }
+
+ of_node_put(rx_node);
+ of_node_put(tx_node);
+ of_node_put(q_node);
+}
+
+/**
* stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
* @plat: driver data platform structure
* @np: device tree node
@@ -340,6 +429,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
plat->axi = stmmac_axi_setup(pdev);
+ stmmac_mtl_setup(pdev, plat);
+
/* clock setup */
plat->stmmac_clk = devm_clk_get(&pdev->dev,
STMMAC_RESOURCE_NAME);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index fc273e9..266ff2a 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -28,6 +28,9 @@
#include <linux/platform_device.h>
+#define MTL_MAX_RX_QUEUES 8
+#define MTL_MAX_TX_QUEUES 8
+
#define STMMAC_RX_COE_NONE 0
#define STMMAC_RX_COE_TYPE1 1
#define STMMAC_RX_COE_TYPE2 2
@@ -44,6 +47,18 @@
#define STMMAC_CSR_150_250M 0x4 /* MDC = clk_scr_i/102 */
#define STMMAC_CSR_250_300M 0x5 /* MDC = clk_scr_i/122 */
+/* MTL algorithms identifiers */
+#define MTL_TX_ALGORITHM_WRR 0x0
+#define MTL_TX_ALGORITHM_WFQ 0x1
+#define MTL_TX_ALGORITHM_DWRR 0x2
+#define MTL_TX_ALGORITHM_SP 0x3
+#define MTL_RX_ALGORITHM_SP 0x4
+#define MTL_RX_ALGORITHM_WSP 0x5
+
+/* RX Queue Mode */
+#define MTL_RX_DCB 0x0
+#define MTL_RX_AVB 0x1
+
/* The MDC clock could be set higher than the IEEE 802.3
* specified frequency limit 0f 2.5 MHz, by programming a clock divider
* of value different than the above defined values. The resultant MDIO
@@ -109,6 +124,15 @@ struct stmmac_axi {
bool axi_rb;
};
+struct stmmac_rxq_cfg {
+ u8 mode_to_use;
+ u8 chan;
+};
+
+struct stmmac_txq_cfg {
+ u8 weight;
+};
+
struct plat_stmmacenet_data {
int bus_id;
int phy_addr;
@@ -133,6 +157,12 @@ struct plat_stmmacenet_data {
int unicast_filter_entries;
int tx_fifo_size;
int rx_fifo_size;
+ u8 rx_queues_to_use;
+ u8 tx_queues_to_use;
+ u8 rx_sched_algorithm;
+ u8 tx_sched_algorithm;
+ struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES];
+ struct stmmac_txq_cfg tx_queues_cfg[MTL_MAX_TX_QUEUES];
void (*fix_mac_speed)(void *priv, unsigned int speed);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
--
2.9.3
Powered by blists - more mailing lists