[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170311211303.24560-1-vivien.didelot@savoirfairelinux.com>
Date: Sat, 11 Mar 2017 16:12:46 -0500
From: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, kernel@...oirfairelinux.com,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: [PATCH net-next v2 00/17] net: dsa: mv88e6xxx: rework ATU support
The purpose of this patch series is to rework the code related to the
Address Translation Unit (ATU), and bring support for it to the 88E6390
family of switch chips.
All Global (1) ATU related code have been reworked and moved to its own
file. Some port related bits used for ATU configuration (such as the
Learn2All and MessagePort feature) have also been taken care of.
The ports' mode and egress flooding mode have been refactored to fix the
egress of frames with unknown unicast or multicast destination address,
and write all these bits regardless the port mode (Normal, DSA, etc.)
Finally remove the eth_addr_greater which was only used by mv88e6xxx.
Changes in v2:
- add Reviewed-by tags
- split mv88e6xxx_g1_atu_set_age_time and mv88e6xxx_atu_setup addition
- remove DSA_TAG_PROTO_TRAILER check
- split Message Port and Learn2All addition
- remove unused MV88E6XXX_FLAG_G1_ATU_FID flag
- add dsa_is_normal_port helper
Vivien Didelot (17):
net: dsa: mv88e6xxx: add port mask helper
net: dsa: mv88e6xxx: move ATU ageing time setter
net: dsa: mv88e6xxx: add ATU setup helper
net: dsa: mv88e6xxx: setup message ports
net: dsa: mv88e6xxx: enable ATU Learn2All
net: dsa: mv88e6xxx: rework ATU Load/Purge
net: dsa: mv88e6xxx: rework ATU GetNext
net: dsa: mv88e6xxx: rework ATU Flush
net: dsa: mv88e6xxx: rework ATU Remove
net: dsa: mv88e6xxx: rename new FID helper
net: dsa: mv88e6xxx: rename the port vector member
net: dsa: add dsa_is_normal_port helper
net: dsa: mv88e6xxx: rework port mode setup
net: dsa: mv88e6xxx: fix port egress flooding mode
net: dsa: mv88e6xxx: add port ATU learn limit op
net: dsa: mv88e6xxx: add port priority override op
etherdevice: remove unused eth_addr_greater
drivers/net/dsa/mv88e6xxx/Makefile | 1 +
drivers/net/dsa/mv88e6xxx/chip.c | 667 +++++++++++---------------------
drivers/net/dsa/mv88e6xxx/global1.h | 11 +
drivers/net/dsa/mv88e6xxx/global1_atu.c | 300 ++++++++++++++
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 44 ++-
drivers/net/dsa/mv88e6xxx/port.c | 78 +++-
drivers/net/dsa/mv88e6xxx/port.h | 16 +-
include/linux/etherdevice.h | 15 -
include/net/dsa.h | 5 +
9 files changed, 638 insertions(+), 499 deletions(-)
create mode 100644 drivers/net/dsa/mv88e6xxx/global1_atu.c
--
2.12.0
Powered by blists - more mailing lists