| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170314004142.4746-3-opendmb@gmail.com>
Date: Mon, 13 Mar 2017 17:41:32 -0700
From: Doug Berger <opendmb@...il.com>
To: f.fainelli@...il.com
Cc: robh+dt@...nel.org, mark.rutland@....com, davem@...emloft.net,
rafal@...ecki.pl, xow@...gle.com, joel@....id.au,
jon.mason@...adcom.com, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
pgynther@...gle.com, jaedon.shin@...il.com,
Doug Berger <opendmb@...il.com>
Subject: [PATCH net-next 02/12] net: phy: bcm7xxx: add support for 28nm EPHY
This commit adds support for the internal fast ethernet 10/100 PHY
found in the BCM7260, BCM7268, and BCM7271 devices.
Signed-off-by: Doug Berger <opendmb@...il.com>
---
drivers/net/phy/bcm7xxx.c | 215 +++++++++++++++++++++++++++++++++++++++++++++-
include/linux/brcmphy.h | 3 +
2 files changed, 216 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index d1c2614dad3a..caa9f6e17f34 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -1,7 +1,7 @@
/*
* Broadcom BCM7xxx internal transceivers support.
*
- * Copyright (C) 2014, Broadcom Corporation
+ * Copyright (C) 2014-2017 Broadcom
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -19,7 +19,7 @@
/* Broadcom BCM7xxx internal PHY registers */
-/* 40nm only register definitions */
+/* EPHY only register definitions */
#define MII_BCM7XXX_100TX_AUX_CTL 0x10
#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
#define MII_BCM7XXX_100TX_DISC 0x14
@@ -27,6 +27,19 @@
#define MII_BCM7XXX_64CLK_MDIO BIT(12)
#define MII_BCM7XXX_TEST 0x1f
#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
+#define MII_BCM7XXX_SHD_2_ADDR_CTRL 0xe
+#define MII_BCM7XXX_SHD_2_CTRL_STAT 0xf
+#define MII_BCM7XXX_SHD_2_BIAS_TRIM 0x1a
+#define MII_BCM7XXX_SHD_3_AN_EEE_ADV 0x3
+#define MII_BCM7XXX_SHD_3_PCS_CTRL_2 0x6
+#define MII_BCM7XXX_PCS_CTRL_2_DEF 0x4400
+#define MII_BCM7XXX_SHD_3_AN_STAT 0xb
+#define MII_BCM7XXX_AN_NULL_MSG_EN BIT(0)
+#define MII_BCM7XXX_AN_EEE_EN BIT(1)
+#define MII_BCM7XXX_SHD_3_EEE_THRESH 0xe
+#define MII_BCM7XXX_EEE_THRESH_DEF 0x50
+#define MII_BCM7XXX_SHD_3_TL4 0x23
+#define MII_BCM7XXX_TL4_RST_MSK (BIT(2) | BIT(1))
/* 28nm only register definitions */
#define MISC_ADDR(base, channel) base, channel
@@ -286,6 +299,181 @@ static int phy_set_clr_bits(struct phy_device *dev, int location,
return v;
}
+static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* set shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+ MII_BCM7XXX_SHD_MODE_2, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Set current trim values INT_trim = -1, Ext_trim =0 */
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_BIAS_TRIM, 0x3BE0);
+ if (ret < 0)
+ goto reset_shadow_mode;
+
+ /* Cal reset */
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+ MII_BCM7XXX_SHD_3_TL4);
+ if (ret < 0)
+ goto reset_shadow_mode;
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+ MII_BCM7XXX_TL4_RST_MSK, 0);
+ if (ret < 0)
+ goto reset_shadow_mode;
+
+ /* Cal reset disable */
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+ MII_BCM7XXX_SHD_3_TL4);
+ if (ret < 0)
+ goto reset_shadow_mode;
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+ 0, MII_BCM7XXX_TL4_RST_MSK);
+ if (ret < 0)
+ goto reset_shadow_mode;
+
+reset_shadow_mode:
+ /* reset shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
+ MII_BCM7XXX_SHD_MODE_2);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* The 28nm EPHY does not support Clause 45 (MMD) used by bcm-phy-lib */
+static int bcm7xxx_28nm_ephy_apd_enable(struct phy_device *phydev)
+{
+ int ret;
+
+ /* set shadow mode 1 */
+ ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST,
+ MII_BRCM_FET_BT_SRE, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Enable auto-power down */
+ ret = phy_set_clr_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+ MII_BRCM_FET_SHDW_AS2_APDE, 0);
+ if (ret < 0)
+ return ret;
+
+ /* reset shadow mode 1 */
+ ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, 0,
+ MII_BRCM_FET_BT_SRE);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_ephy_eee_enable(struct phy_device *phydev)
+{
+ int ret;
+
+ /* set shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+ MII_BCM7XXX_SHD_MODE_2, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Advertise supported modes */
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+ MII_BCM7XXX_SHD_3_AN_EEE_ADV);
+ if (ret < 0)
+ goto reset_shadow_mode;
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+ MDIO_EEE_100TX);
+ if (ret < 0)
+ goto reset_shadow_mode;
+
+ /* Restore Defaults */
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+ MII_BCM7XXX_SHD_3_PCS_CTRL_2);
+ if (ret < 0)
+ goto reset_shadow_mode;
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+ MII_BCM7XXX_PCS_CTRL_2_DEF);
+ if (ret < 0)
+ goto reset_shadow_mode;
+
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+ MII_BCM7XXX_SHD_3_EEE_THRESH);
+ if (ret < 0)
+ goto reset_shadow_mode;
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+ MII_BCM7XXX_EEE_THRESH_DEF);
+ if (ret < 0)
+ goto reset_shadow_mode;
+
+ /* Enable EEE autonegotiation */
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+ MII_BCM7XXX_SHD_3_AN_STAT);
+ if (ret < 0)
+ goto reset_shadow_mode;
+ ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+ (MII_BCM7XXX_AN_NULL_MSG_EN | MII_BCM7XXX_AN_EEE_EN));
+ if (ret < 0)
+ goto reset_shadow_mode;
+
+reset_shadow_mode:
+ /* reset shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
+ MII_BCM7XXX_SHD_MODE_2);
+ if (ret < 0)
+ return ret;
+
+ /* Restart autoneg */
+ phy_write(phydev, MII_BMCR,
+ (BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART));
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev)
+{
+ u8 rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
+ int ret = 0;
+
+ pr_info_once("%s: %s PHY revision: 0x%02x\n",
+ phydev_name(phydev), phydev->drv->name, rev);
+
+ /* Dummy read to a register to workaround a possible issue upon reset
+ * where the internal inverter may not allow the first MDIO transaction
+ * to pass the MDIO management controller and make us return 0xffff for
+ * such reads.
+ */
+ phy_read(phydev, MII_BMSR);
+
+ /* Apply AFE software work-around if necessary */
+ if (rev == 0x01) {
+ ret = bcm7xxx_28nm_ephy_01_afe_config_init(phydev);
+ if (ret)
+ return ret;
+ }
+
+ ret = bcm7xxx_28nm_ephy_eee_enable(phydev);
+ if (ret)
+ return ret;
+
+ return bcm7xxx_28nm_ephy_apd_enable(phydev);
+}
+
+static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Re-apply workarounds coming out suspend/resume */
+ ret = bcm7xxx_28nm_ephy_config_init(phydev);
+ if (ret)
+ return ret;
+
+ return genphy_config_aneg(phydev);
+}
+
static int bcm7xxx_config_init(struct phy_device *phydev)
{
int ret;
@@ -434,6 +622,23 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.probe = bcm7xxx_28nm_probe, \
}
+#define BCM7XXX_28NM_EPHY(_oui, _name) \
+{ \
+ .phy_id = (_oui), \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_BASIC_FEATURES, \
+ .flags = PHY_IS_INTERNAL, \
+ .config_init = bcm7xxx_28nm_ephy_config_init, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ .resume = bcm7xxx_28nm_ephy_resume, \
+ .get_sset_count = bcm_phy_get_sset_count, \
+ .get_strings = bcm_phy_get_strings, \
+ .get_stats = bcm7xxx_28nm_get_phy_stats, \
+ .probe = bcm7xxx_28nm_probe, \
+}
+
#define BCM7XXX_40NM_EPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -450,6 +655,9 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
static struct phy_driver bcm7xxx_driver[] = {
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+ BCM7XXX_28NM_EPHY(PHY_ID_BCM7260, "Broadcom BCM7260"),
+ BCM7XXX_28NM_EPHY(PHY_ID_BCM7268, "Broadcom BCM7268"),
+ BCM7XXX_28NM_EPHY(PHY_ID_BCM7271, "Broadcom BCM7271"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
@@ -466,6 +674,9 @@ static struct phy_driver bcm7xxx_driver[] = {
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
{ PHY_ID_BCM7250, 0xfffffff0, },
+ { PHY_ID_BCM7260, 0xfffffff0, },
+ { PHY_ID_BCM7268, 0xfffffff0, },
+ { PHY_ID_BCM7271, 0xfffffff0, },
{ PHY_ID_BCM7278, 0xfffffff0, },
{ PHY_ID_BCM7364, 0xfffffff0, },
{ PHY_ID_BCM7366, 0xfffffff0, },
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 55e517130311..abcda9b458ab 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -25,6 +25,9 @@
#define PHY_ID_BCM57780 0x03625d90
#define PHY_ID_BCM7250 0xae025280
+#define PHY_ID_BCM7260 0xae025190
+#define PHY_ID_BCM7268 0xae025090
+#define PHY_ID_BCM7271 0xae0253b0
#define PHY_ID_BCM7278 0xae0251a0
#define PHY_ID_BCM7364 0xae025260
#define PHY_ID_BCM7366 0x600d8490
--
2.11.1
Powered by blists - more mailing lists