netdev - Re: [PATCH net-next 02/12] net: phy: bcm7xxx: add support for 28nm EPHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170314010651.GO15842@lunn.ch>
Date:   Tue, 14 Mar 2017 02:06:51 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Doug Berger <opendmb@...il.com>
Cc:     f.fainelli@...il.com, robh+dt@...nel.org, mark.rutland@....com,
        davem@...emloft.net, rafal@...ecki.pl, xow@...gle.com,
        joel@....id.au, jon.mason@...adcom.com, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        pgynther@...gle.com, jaedon.shin@...il.com
Subject: Re: [PATCH net-next 02/12] net: phy: bcm7xxx: add support for 28nm
 EPHY

On Mon, Mar 13, 2017 at 05:41:32PM -0700, Doug Berger wrote:
> +static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev)
> +{
> +	int ret;
> +
> +	/* set shadow mode 2 */
> +	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
> +			       MII_BCM7XXX_SHD_MODE_2, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Set current trim values INT_trim = -1, Ext_trim =0 */
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_BIAS_TRIM, 0x3BE0);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +
> +	/* Cal reset */
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
> +			MII_BCM7XXX_SHD_3_TL4);
> +	if (ret < 0)
> +		goto reset_shadow_mode;

Hi Doug

It would be nice to have a few blank lines here and there...

> +	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
> +			       MII_BCM7XXX_TL4_RST_MSK, 0);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +
> +	/* Cal reset disable */
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
> +			MII_BCM7XXX_SHD_3_TL4);
> +	if (ret < 0)
> +		goto reset_shadow_mode;

... just to break things up into readable chunks.

> +	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
> +			       0, MII_BCM7XXX_TL4_RST_MSK);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +
> +reset_shadow_mode:
> +	/* reset shadow mode 2 */
> +	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
> +			       MII_BCM7XXX_SHD_MODE_2);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;

How about:

	return phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
	       		        MII_BCM7XXX_SHD_MODE_2);

> +/* The 28nm EPHY does not support Clause 45 (MMD) used by bcm-phy-lib */
> +static int bcm7xxx_28nm_ephy_apd_enable(struct phy_device *phydev)
> +{
> +	int ret;
> +
> +	/* set shadow mode 1 */
> +	ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST,
> +			       MII_BRCM_FET_BT_SRE, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Enable auto-power down */
> +	ret = phy_set_clr_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
> +			       MII_BRCM_FET_SHDW_AS2_APDE, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* reset shadow mode 1 */
> +	ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, 0,
> +			       MII_BRCM_FET_BT_SRE);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;

How about just

    return phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, 0,
    	   		       MII_BRCM_FET_BT_SRE);


> +}
> +
> +static int bcm7xxx_28nm_ephy_eee_enable(struct phy_device *phydev)
> +{
> +	int ret;
> +
> +	/* set shadow mode 2 */
> +	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
> +			       MII_BCM7XXX_SHD_MODE_2, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Advertise supported modes */
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
> +			MII_BCM7XXX_SHD_3_AN_EEE_ADV);
> +	if (ret < 0)
> +		goto reset_shadow_mode;

blank...

> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
> +			MDIO_EEE_100TX);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +
> +	/* Restore Defaults */
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
> +			MII_BCM7XXX_SHD_3_PCS_CTRL_2);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
> +			MII_BCM7XXX_PCS_CTRL_2_DEF);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
> +			MII_BCM7XXX_SHD_3_EEE_THRESH);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
> +			MII_BCM7XXX_EEE_THRESH_DEF);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +
> +	/* Enable EEE autonegotiation */
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
> +			MII_BCM7XXX_SHD_3_AN_STAT);
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
> +			(MII_BCM7XXX_AN_NULL_MSG_EN | MII_BCM7XXX_AN_EEE_EN));
> +	if (ret < 0)
> +		goto reset_shadow_mode;
> +
> +reset_shadow_mode:
> +	/* reset shadow mode 2 */
> +	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
> +			       MII_BCM7XXX_SHD_MODE_2);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Restart autoneg */
> +	phy_write(phydev, MII_BMCR,
> +		  (BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART));
> +
> +	return 0;

  return phy_write(.....); ?

> +}

  Andrew