[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170314004142.4746-11-opendmb@gmail.com>
Date: Mon, 13 Mar 2017 17:41:40 -0700
From: Doug Berger <opendmb@...il.com>
To: f.fainelli@...il.com
Cc: robh+dt@...nel.org, mark.rutland@....com, davem@...emloft.net,
rafal@...ecki.pl, xow@...gle.com, joel@....id.au,
jon.mason@...adcom.com, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
pgynther@...gle.com, jaedon.shin@...il.com,
Doug Berger <opendmb@...il.com>
Subject: [PATCH net-next 10/12] dt-bindings: net: document bcmgenet WoL interrupt
A third interrupt cell can be provided to optionally specify
the interrupt used for handling Wake on LAN events.
Typically the wake up handling uses a separate interrupt
controller, so the interrupts-extended property is used to
accommodate this.
Signed-off-by: Doug Berger <opendmb@...il.com>
---
Documentation/devicetree/bindings/net/brcm,bcmgenet.txt | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
index 10587bdadbbe..01a70463cbc5 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@@ -4,9 +4,12 @@ Required properties:
- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
"brcm,genet-v3", "brcm,genet-v4".
- reg: address and length of the register set for the device
-- interrupts: must be two cells, the first cell is the general purpose
- interrupt line, while the second cell is the interrupt for the ring
- RX and TX queues operating in ring mode
+- interrupts and/or interrupts-extended: must be two cells, the first cell
+ is the general purpose interrupt line, while the second cell is the
+ interrupt for the ring RX and TX queues operating in ring mode. An
+ optional third interrupt cell for Wake-on-LAN can be specified.
+ See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+ for information on the property specifics.
- phy-mode: see ethernet.txt file in the same directory
- #address-cells: should be 1
- #size-cells: should be 1
--
2.11.1
Powered by blists - more mailing lists