lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1489921700-6850-5-git-send-email-Yuval.Mintz@cavium.com>
Date:   Sun, 19 Mar 2017 13:08:15 +0200
From:   Yuval Mintz <Yuval.Mintz@...ium.com>
To:     <davem@...emloft.net>, <netdev@...r.kernel.org>
CC:     Yuval Mintz <Yuval.Mintz@...ium.com>
Subject: [PATCH net-next 4/9] qed: Correct default VF coalescing configuration

When starting the VF's vport, the PF would first configure
the status blocks of the VF and then reset them.
That would cause some of the configured information to be lost -
specifically it would mean that all the VFs queues would use
the Rx coalescing state-machine of the status block.

Signed-off-by: Yuval Mintz <Yuval.Mintz@...ium.com>
---
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index aea1e4c..098330e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -1755,6 +1755,8 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn,
 	vf->state = VF_ENABLED;
 	start = &mbx->req_virt->start_vport;
 
+	qed_iov_enable_vf_traffic(p_hwfn, p_ptt, vf);
+
 	/* Initialize Status block in CAU */
 	for (sb_id = 0; sb_id < vf->num_sbs; sb_id++) {
 		if (!start->sb_addr[sb_id]) {
@@ -1768,7 +1770,6 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn,
 				    start->sb_addr[sb_id],
 				    vf->igu_sbs[sb_id], vf->abs_vf_id, 1);
 	}
-	qed_iov_enable_vf_traffic(p_hwfn, p_ptt, vf);
 
 	vf->mtu = start->mtu;
 	vf->shadow_config.inner_vlan_removal = start->inner_vlan_removal;
-- 
1.9.3

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ