| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1489921700-6850-7-git-send-email-Yuval.Mintz@cavium.com>
Date: Sun, 19 Mar 2017 13:08:17 +0200
From: Yuval Mintz <Yuval.Mintz@...ium.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: Yuval Mintz <Yuval.Mintz@...ium.com>
Subject: [PATCH net-next 6/9] qed: Deprecate VF multiple queue-stop
The PF<->VF interface allows for the VF to request
multiple queues closure via a single message, but this has
never been used by any official driver.
We now deprecate this option, forcing each queue close
to arrive via a different command; This would be required
for future TLVs that are going to extend the queue TLVs with
additional information on a per-queue basis.
Signed-off-by: Yuval Mintz <Yuval.Mintz@...ium.com>
---
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 104 ++++++++++++++++------------
drivers/net/ethernet/qlogic/qed/qed_vf.h | 4 ++
2 files changed, 62 insertions(+), 46 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index 7547a23..f8498a3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -2118,57 +2118,53 @@ static void qed_iov_vf_mbx_start_txq(struct qed_hwfn *p_hwfn,
static int qed_iov_vf_stop_rxqs(struct qed_hwfn *p_hwfn,
struct qed_vf_info *vf,
- u16 rxq_id, u8 num_rxqs, bool cqe_completion)
+ u16 rxq_id, bool cqe_completion)
{
struct qed_vf_q_info *p_queue;
int rc = 0;
- int qid;
- if (rxq_id + num_rxqs > ARRAY_SIZE(vf->vf_queues))
+ if (!qed_iov_validate_rxq(p_hwfn, vf, rxq_id,
+ QED_IOV_VALIDATE_Q_ENABLE)) {
+ DP_VERBOSE(p_hwfn,
+ QED_MSG_IOV,
+ "VF[%d] Tried Closing Rx 0x%04x which is inactive\n",
+ vf->relative_vf_id, rxq_id);
return -EINVAL;
+ }
- for (qid = rxq_id; qid < rxq_id + num_rxqs; qid++) {
- p_queue = &vf->vf_queues[qid];
-
- if (!p_queue->p_rx_cid)
- continue;
+ p_queue = &vf->vf_queues[rxq_id];
- rc = qed_eth_rx_queue_stop(p_hwfn,
- p_queue->p_rx_cid,
- false, cqe_completion);
- if (rc)
- return rc;
+ rc = qed_eth_rx_queue_stop(p_hwfn,
+ p_queue->p_rx_cid,
+ false, cqe_completion);
+ if (rc)
+ return rc;
- vf->vf_queues[qid].p_rx_cid = NULL;
- vf->num_active_rxqs--;
- }
+ p_queue->p_rx_cid = NULL;
+ vf->num_active_rxqs--;
- return rc;
+ return 0;
}
static int qed_iov_vf_stop_txqs(struct qed_hwfn *p_hwfn,
- struct qed_vf_info *vf, u16 txq_id, u8 num_txqs)
+ struct qed_vf_info *vf, u16 txq_id)
{
- int rc = 0;
struct qed_vf_q_info *p_queue;
- int qid;
+ int rc = 0;
- if (txq_id + num_txqs > ARRAY_SIZE(vf->vf_queues))
+ if (!qed_iov_validate_txq(p_hwfn, vf, txq_id,
+ QED_IOV_VALIDATE_Q_ENABLE))
return -EINVAL;
- for (qid = txq_id; qid < txq_id + num_txqs; qid++) {
- p_queue = &vf->vf_queues[qid];
- if (!p_queue->p_tx_cid)
- continue;
+ p_queue = &vf->vf_queues[txq_id];
- rc = qed_eth_tx_queue_stop(p_hwfn, p_queue->p_tx_cid);
- if (rc)
- return rc;
+ rc = qed_eth_tx_queue_stop(p_hwfn, p_queue->p_tx_cid);
+ if (rc)
+ return rc;
- p_queue->p_tx_cid = NULL;
- }
+ p_queue->p_tx_cid = NULL;
- return rc;
+ return 0;
}
static void qed_iov_vf_mbx_stop_rxqs(struct qed_hwfn *p_hwfn,
@@ -2177,20 +2173,28 @@ static void qed_iov_vf_mbx_stop_rxqs(struct qed_hwfn *p_hwfn,
{
u16 length = sizeof(struct pfvf_def_resp_tlv);
struct qed_iov_vf_mbx *mbx = &vf->vf_mbx;
- u8 status = PFVF_STATUS_SUCCESS;
+ u8 status = PFVF_STATUS_FAILURE;
struct vfpf_stop_rxqs_tlv *req;
int rc;
- /* We give the option of starting from qid != 0, in this case we
- * need to make sure that qid + num_qs doesn't exceed the actual
- * amount of queues that exist.
+ /* There has never been an official driver that used this interface
+ * for stopping multiple queues, and it is now considered deprecated.
+ * Validate this isn't used here.
*/
req = &mbx->req_virt->stop_rxqs;
- rc = qed_iov_vf_stop_rxqs(p_hwfn, vf, req->rx_qid,
- req->num_rxqs, req->cqe_completion);
- if (rc)
- status = PFVF_STATUS_FAILURE;
+ if (req->num_rxqs != 1) {
+ DP_VERBOSE(p_hwfn, QED_MSG_IOV,
+ "Odd; VF[%d] tried stopping multiple Rx queues\n",
+ vf->relative_vf_id);
+ status = PFVF_STATUS_NOT_SUPPORTED;
+ goto out;
+ }
+ rc = qed_iov_vf_stop_rxqs(p_hwfn, vf, req->rx_qid,
+ req->cqe_completion);
+ if (!rc)
+ status = PFVF_STATUS_SUCCESS;
+out:
qed_iov_prepare_resp(p_hwfn, p_ptt, vf, CHANNEL_TLV_STOP_RXQS,
length, status);
}
@@ -2201,19 +2205,27 @@ static void qed_iov_vf_mbx_stop_txqs(struct qed_hwfn *p_hwfn,
{
u16 length = sizeof(struct pfvf_def_resp_tlv);
struct qed_iov_vf_mbx *mbx = &vf->vf_mbx;
- u8 status = PFVF_STATUS_SUCCESS;
+ u8 status = PFVF_STATUS_FAILURE;
struct vfpf_stop_txqs_tlv *req;
int rc;
- /* We give the option of starting from qid != 0, in this case we
- * need to make sure that qid + num_qs doesn't exceed the actual
- * amount of queues that exist.
+ /* There has never been an official driver that used this interface
+ * for stopping multiple queues, and it is now considered deprecated.
+ * Validate this isn't used here.
*/
req = &mbx->req_virt->stop_txqs;
- rc = qed_iov_vf_stop_txqs(p_hwfn, vf, req->tx_qid, req->num_txqs);
- if (rc)
- status = PFVF_STATUS_FAILURE;
+ if (req->num_txqs != 1) {
+ DP_VERBOSE(p_hwfn, QED_MSG_IOV,
+ "Odd; VF[%d] tried stopping multiple Tx queues\n",
+ vf->relative_vf_id);
+ status = PFVF_STATUS_NOT_SUPPORTED;
+ goto out;
+ }
+ rc = qed_iov_vf_stop_txqs(p_hwfn, vf, req->tx_qid);
+ if (!rc)
+ status = PFVF_STATUS_SUCCESS;
+out:
qed_iov_prepare_resp(p_hwfn, p_ptt, vf, CHANNEL_TLV_STOP_TXQS,
length, status);
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.h b/drivers/net/ethernet/qlogic/qed/qed_vf.h
index 7da0b16..105c0ed 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.h
@@ -275,6 +275,8 @@ struct vfpf_stop_rxqs_tlv {
struct vfpf_first_tlv first_tlv;
u16 rx_qid;
+
+ /* this field is deprecated and should *always* be set to '1' */
u8 num_rxqs;
u8 cqe_completion;
u8 padding[4];
@@ -285,6 +287,8 @@ struct vfpf_stop_txqs_tlv {
struct vfpf_first_tlv first_tlv;
u16 tx_qid;
+
+ /* this field is deprecated and should *always* be set to '1' */
u8 num_txqs;
u8 padding[5];
};
--
1.9.3
Powered by blists - more mailing lists