netdev - Re: [PATCH net] net: bcmgenet: remove bcmgenet_internal_phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <090870fe-ac73-636b-3cd5-91693ec762c1@gmail.com>
Date:   Tue, 21 Mar 2017 15:40:00 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Doug Berger <opendmb@...il.com>
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net] net: bcmgenet: remove bcmgenet_internal_phy_setup()

On 03/21/2017 02:01 PM, Doug Berger wrote:
> Commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset")
> removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and
> bcmgenet_internal_phy_setup() functions.  In so doing it broke the reset
> of the internal PHY devices used by the GENETv1-GENETv3 which required
> this reset before the UniMAC was enabled.  It also broke the internal
> GPHY devices used by the GENETv4 because the config_init that installed
> the AFE workaround was no longer occurring after the reset of the GPHY
> performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup().
> In addition the code in bcmgenet_internal_phy_setup() related to the
> "enable APD" comment goes with the bcmgenet_mii_reset() so it should
> have also been removed.
> 
> Commit bd4060a6108b ("net: bcmgenet: Power on integrated GPHY in
> bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the
> bcmgenet_power_up() function, but failed to remove it from the
> bcmgenet_internal_phy_setup() function.  Had it done so, the
> bcmgenet_internal_phy_setup() function would have been empty and could
> have been removed at that time.
> 
> Commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on")
> was submitted to correct the functional problems introduced by
> commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset"). It
> was included in v4.4 and made available on 4.3-stable. Unfortunately,
> it didn't fully revert the commit because this bcmgenet_mii_reset()
> doesn't apply the soft reset to the internal GPHY used by GENETv4 like
> the previous one did. This prevents the restoration of the AFE work-
> arounds for internal GPHY devices after the bcmgenet_phy_power_set() in
> bcmgenet_internal_phy_setup().
> 
> This commit takes the alternate approach of removing the unnecessary
> bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3
> so that when bcmgenet_mii_reset() was restored it should have only gone
> into bcmgenet_power_up().  This will avoid the problems while also
> removing the redundancy (and hopefully some of the confusion).
> 
> Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset")
> Signed-off-by: Doug Berger <opendmb@...il.com>

Too bad the commit message award of the year was already won [1],
because you are definitively on the short list for that one above.

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>

> ---

[1]: https://lkml.org/lkml/2017/3/10/1583
-- 
Florian