Message-Id: <20170324051432.79216-5-jeffrey.t.kirsher@intel.com>
Date:   Thu, 23 Mar 2017 22:14:26 -0700
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Jacob Keller <jacob.e.keller@...el.com>, netdev@...r.kernel.org,
        nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 04/10] i40e: allow changing input set for ntuple filters

From: Jacob Keller <jacob.e.keller@...el.com>

Add support to detect when we can update the input set for each flow
type.

Because the hardware only supports a single input set for all flows of
that matching type, the driver shall only allow the input set to change
if there are no other configured filters for that flow type.

Thus, the first filter added for each flow type is allowed to change the
input set, and all future filters must match the same input set. Display
a diagnostic message whenever the filter input set changes, and
a warning whenever a filter cannot be accepted because it does not match
the configured input set.

Change-Id: Ic22e1c267ae37518bb036aca4a5694681449f283
Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 148 ++++++++++++++++++++++++-
 1 file changed, 145 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 1815c149040f..a2ef49084d46 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -2757,11 +2757,107 @@ static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
 }
 
 /**
+ * i40e_flow_str - Converts a flow_type into a human readable string
+ * @flow_type: the flow type from a flow specification
+ *
+ * Currently only flow types we support are included here, and the string
+ * value attempts to match what ethtool would use to configure this flow type.
+ **/
+static const char *i40e_flow_str(struct ethtool_rx_flow_spec *fsp)
+{
+	switch (fsp->flow_type & ~FLOW_EXT) {
+	case TCP_V4_FLOW:
+		return "tcp4";
+	case UDP_V4_FLOW:
+		return "udp4";
+	case SCTP_V4_FLOW:
+		return "sctp4";
+	case IP_USER_FLOW:
+		return "ip4";
+	default:
+		return "unknown";
+	}
+}
+
+/**
+ * i40e_print_input_set - Show changes between two input sets
+ * @vsi: the vsi being configured
+ * @old: the old input set
+ * @new: the new input set
+ *
+ * Print the difference between old and new input sets by showing which series
+ * of words are toggled on or off. Only displays the bits we actually support
+ * changing.
+ **/
+static void i40e_print_input_set(struct i40e_vsi *vsi, u64 old, u64 new)
+{
+	struct i40e_pf *pf = vsi->back;
+	bool old_value, new_value;
+
+	old_value = !!(old & I40E_L3_SRC_MASK);
+	new_value = !!(new & I40E_L3_SRC_MASK);
+	if (old_value != new_value)
+		netif_info(pf, drv, vsi->netdev, "L3 source address: %s -> %s\n",
+			   old_value ? "ON" : "OFF",
+			   new_value ? "ON" : "OFF");
+
+	old_value = !!(old & I40E_L3_DST_MASK);
+	new_value = !!(new & I40E_L3_DST_MASK);
+	if (old_value != new_value)
+		netif_info(pf, drv, vsi->netdev, "L3 destination address: %s -> %s\n",
+			   old_value ? "ON" : "OFF",
+			   new_value ? "ON" : "OFF");
+
+	old_value = !!(old & I40E_L4_SRC_MASK);
+	new_value = !!(new & I40E_L4_SRC_MASK);
+	if (old_value != new_value)
+		netif_info(pf, drv, vsi->netdev, "L4 source port: %s -> %s\n",
+			   old_value ? "ON" : "OFF",
+			   new_value ? "ON" : "OFF");
+
+	old_value = !!(old & I40E_L4_DST_MASK);
+	new_value = !!(new & I40E_L4_DST_MASK);
+	if (old_value != new_value)
+		netif_info(pf, drv, vsi->netdev, "L4 destination port: %s -> %s\n",
+			   old_value ? "ON" : "OFF",
+			   new_value ? "ON" : "OFF");
+
+	old_value = !!(old & I40E_VERIFY_TAG_MASK);
+	new_value = !!(new & I40E_VERIFY_TAG_MASK);
+	if (old_value != new_value)
+		netif_info(pf, drv, vsi->netdev, "SCTP verification tag: %s -> %s\n",
+			   old_value ? "ON" : "OFF",
+			   new_value ? "ON" : "OFF");
+
+	netif_info(pf, drv, vsi->netdev, "  Current input set: %0llx\n",
+		   old);
+	netif_info(pf, drv, vsi->netdev, "Requested input set: %0llx\n",
+		   new);
+}
+
+/**
  * i40e_check_fdir_input_set - Check that a given rx_flow_spec mask is valid
  * @vsi: pointer to the targeted VSI
  * @fsp: pointer to Rx flow specification
  *
- * Ensures that a given ethtool_rx_flow_spec has a valid mask.
+ * Ensures that a given ethtool_rx_flow_spec has a valid mask. Some support
+ * for partial matches exists with a few limitations. First, hardware only
+ * supports masking by word boundary (2 bytes) and not per individual bit.
+ * Second, hardware is limited to using one mask for a flow type and cannot
+ * use a separate mask for each filter.
+ *
+ * To support these limitations, if we already have a configured filter for
+ * the specified type, this function enforces that new filters of the type
+ * match the configured input set. Otherwise, if we do not have a filter of
+ * the specified type, we allow the input set to be updated to match the
+ * desired filter.
+ *
+ * To help ensure that administrators understand why filters weren't displayed
+ * as supported, we print a diagnostic message displaying how the input set
+ * would change and warning to delete the preexisting filters if required.
+ *
+ * Returns 0 on successful input set match, and a negative return code on
+ * failure.
  **/
 static int i40e_check_fdir_input_set(struct i40e_vsi *vsi,
 				     struct ethtool_rx_flow_spec *fsp)
@@ -2770,17 +2866,21 @@ static int i40e_check_fdir_input_set(struct i40e_vsi *vsi,
 	struct ethtool_tcpip4_spec *tcp_ip4_spec;
 	struct ethtool_usrip4_spec *usr_ip4_spec;
 	u64 current_mask, new_mask;
+	u16 *fdir_filter_count;
 	u16 index;
 
 	switch (fsp->flow_type & ~FLOW_EXT) {
 	case TCP_V4_FLOW:
 		index = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
+		fdir_filter_count = &pf->fd_tcp4_filter_cnt;
 		break;
 	case UDP_V4_FLOW:
 		index = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
+		fdir_filter_count = &pf->fd_udp4_filter_cnt;
 		break;
 	case IP_USER_FLOW:
 		index = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
+		fdir_filter_count = &pf->fd_ip4_filter_cnt;
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -2790,7 +2890,15 @@ static int i40e_check_fdir_input_set(struct i40e_vsi *vsi,
 	current_mask = i40e_read_fd_input_set(pf, index);
 	new_mask = current_mask;
 
-	/* Verify the provided mask is valid. */
+	/* Determine, if any, the required changes to the input set in order
+	 * to support the provided mask.
+	 *
+	 * Hardware only supports masking at word (2 byte) granularity and does
+	 * not support full bitwise masking. This implementation simplifies
+	 * even further and only supports fully enabled or fully disabled
+	 * masks for each field, even though we could split the ip4src and
+	 * ip4dst fields.
+	 */
 	switch (fsp->flow_type & ~FLOW_EXT) {
 	case TCP_V4_FLOW:
 	case UDP_V4_FLOW:
@@ -2877,8 +2985,42 @@ static int i40e_check_fdir_input_set(struct i40e_vsi *vsi,
 		return -EOPNOTSUPP;
 	}
 
-	if (new_mask != current_mask)
+	/* If the input set doesn't need any changes then this filter is safe
+	 * to apply.
+	 */
+	if (new_mask == current_mask)
+		return 0;
+
+	netif_info(pf, drv, vsi->netdev, "Input set change requested for %s flows:\n",
+		   i40e_flow_str(fsp));
+	i40e_print_input_set(vsi, current_mask, new_mask);
+
+	/* Hardware input sets are global across multiple ports, so even the
+	 * main port cannot change them when in MFP mode as this would impact
+	 * any filters on the other ports.
+	 */
+	if (pf->flags & I40E_FLAG_MFP_ENABLED) {
+		netif_err(pf, drv, vsi->netdev, "Cannot change Flow Director input sets while MFP is enabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	/* This filter requires us to update the input set. However, hardware
+	 * only supports one input set per flow type, and does not support
+	 * separate masks for each filter. This means that we can only support
+	 * a single mask for all filters of a specific type.
+	 *
+	 * If we have preexisting filters, they obviously depend on the
+	 * current programmed input set. Display a diagnostic message in this
+	 * case explaining why the filter could not be accepted.
+	 */
+	if (*fdir_filter_count) {
+		netif_err(pf, drv, vsi->netdev, "Cannot change input set for %s flows until %d preexisting filters are removed\n",
+			  i40e_flow_str(fsp),
+			  *fdir_filter_count);
 		return -EOPNOTSUPP;
+	}
+
+	i40e_write_fd_input_set(pf, index, new_mask);
 
 	return 0;
 }
-- 
2.12.0

Powered by blists - more mailing lists