[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1d0a9c73-3e68-295c-3477-7c47e9decce6@ti.com>
Date: Wed, 5 Apr 2017 11:35:20 +0300
From: Roger Quadros <rogerq@...com>
To: Tony Lindgren <tony@...mide.com>
CC: <davem@...emloft.net>, <grygorii.strashko@...com>,
<nsekhar@...com>, <jsarha@...com>, <linux-omap@...r.kernel.org>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 0/2] ARM: am335x-icev2: Add ethernet support
On 04/04/17 19:01, Tony Lindgren wrote:
> * Roger Quadros <rogerq@...com> [170330 05:37]:
>> Hi Tony & Dave,
>>
>> On 13/03/17 15:42, Roger Quadros wrote:
>>> Hi,
>>>
>>> This series adds ethernet support to am335x-icev2 board.
>>>
>>> The ethernet PHYs on the board need an explicit GPIO reset pulse
>>> to ensure they bootstrap to the correct mode. Without the
>>> GPIO reset they just don't work.
>>>
>>> cheers,
>>> -roger
>>
>> Any comments on this series. Patch 1 is at version 2.
>
> I think you meant patch 2/3 is at version2. I've picked
> patches 2 and 3 for v4.12 into dt and defconfig branches.
Thanks Tony.
>
> You may need to resend the davinci_mdio.c patch alone
> for Dave as he usually won't pick individual patches I
> think.
OK, I'll send that one separately.
cheers,
-roger
>
> Regards,
>
> Tony
>
>>> Roger Quadros (2):
>>> net: davinci_mdio: add GPIO reset logic
>>> ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1
>>>
>>> .../devicetree/bindings/net/davinci-mdio.txt | 2 +
>>> arch/arm/boot/dts/am335x-icev2.dts | 113 +++++++++++++++++++++
>>> drivers/net/ethernet/ti/davinci_mdio.c | 68 +++++++++++--
>>> 3 files changed, 175 insertions(+), 8 deletions(-)
>>>
>>
Powered by blists - more mailing lists