| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1491552301-23953-5-git-send-email-Yuval.Mintz@cavium.com>
Date: Fri, 7 Apr 2017 11:05:00 +0300
From: Yuval Mintz <Yuval.Mintz@...ium.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>,
<daniel@...earbox.net>
CC: <ast@...com>, Yuval Mintz <Yuval.Mintz@...ium.com>
Subject: [PATCH net-next 4/5] qede: Add support for ingress headroom
Driver currently doesn't support any headroom; The only 'available'
space it has in the head of the buffer is due to the placement
offset.
In order to allow [later] support of XDP adjustment of headroom,
modify the the ingress flow to properly handle a scenario where
the packets would have such.
Signed-off-by: Yuval Mintz <Yuval.Mintz@...ium.com>
---
drivers/net/ethernet/qlogic/qede/qede.h | 13 ++++++++-----
drivers/net/ethernet/qlogic/qede/qede_fp.c | 23 +++++++++++++----------
drivers/net/ethernet/qlogic/qede/qede_main.c | 5 +++--
3 files changed, 24 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index 7ab2201..5e7ad25 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -313,21 +313,24 @@ struct qede_rx_queue {
u8 data_direction;
u8 rxq_id;
+ /* Used once per each NAPI run */
+ u16 num_rx_buffers;
+
+ u16 rx_headroom;
+
u32 rx_buf_size;
u32 rx_buf_seg_size;
- u64 rcv_pkts;
-
struct sw_rx_data *sw_rx_ring;
struct qed_chain rx_bd_ring;
struct qed_chain rx_comp_ring ____cacheline_aligned;
- /* Used once per each NAPI run */
- u16 num_rx_buffers;
-
/* GRO */
struct qede_agg_info tpa_info[ETH_TPA_MAX_AGGS_NUM];
+ /* Used once per each NAPI run */
+ u64 rcv_pkts;
+
u64 rx_hw_errors;
u64 rx_alloc_errors;
u64 rx_ip_frags;
diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c
index c61cfcf..e382d4b 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -87,7 +87,8 @@ int qede_alloc_rx_buffer(struct qede_rx_queue *rxq, bool allow_lazy)
rx_bd = (struct eth_rx_bd *)qed_chain_produce(&rxq->rx_bd_ring);
WARN_ON(!rx_bd);
rx_bd->addr.hi = cpu_to_le32(upper_32_bits(mapping));
- rx_bd->addr.lo = cpu_to_le32(lower_32_bits(mapping));
+ rx_bd->addr.lo = cpu_to_le32(lower_32_bits(mapping) +
+ rxq->rx_headroom);
rxq->sw_rx_prod++;
rxq->filled_buffers++;
@@ -509,7 +510,8 @@ static inline void qede_reuse_page(struct qede_rx_queue *rxq,
new_mapping = curr_prod->mapping + curr_prod->page_offset;
rx_bd_prod->addr.hi = cpu_to_le32(upper_32_bits(new_mapping));
- rx_bd_prod->addr.lo = cpu_to_le32(lower_32_bits(new_mapping));
+ rx_bd_prod->addr.lo = cpu_to_le32(lower_32_bits(new_mapping) +
+ rxq->rx_headroom);
rxq->sw_rx_prod++;
curr_cons->data = NULL;
@@ -991,13 +993,14 @@ static bool qede_rx_xdp(struct qede_dev *edev,
struct qede_rx_queue *rxq,
struct bpf_prog *prog,
struct sw_rx_data *bd,
- struct eth_fast_path_rx_reg_cqe *cqe)
+ struct eth_fast_path_rx_reg_cqe *cqe,
+ u16 data_offset)
{
u16 len = le16_to_cpu(cqe->len_on_first_bd);
struct xdp_buff xdp;
enum xdp_action act;
- xdp.data = page_address(bd->data) + cqe->placement_offset;
+ xdp.data = page_address(bd->data) + data_offset;
xdp.data_end = xdp.data + len;
/* Queues always have a full reset currently, so for the time
@@ -1026,7 +1029,7 @@ static bool qede_rx_xdp(struct qede_dev *edev,
/* Now if there's a transmission problem, we'd still have to
* throw current buffer, as replacement was already allocated.
*/
- if (qede_xdp_xmit(edev, fp, bd, cqe->placement_offset, len)) {
+ if (qede_xdp_xmit(edev, fp, bd, data_offset, len)) {
dma_unmap_page(rxq->dev, bd->mapping,
PAGE_SIZE, DMA_BIDIRECTIONAL);
__free_page(bd->data);
@@ -1053,7 +1056,7 @@ static struct sk_buff *qede_rx_allocate_skb(struct qede_dev *edev,
struct sw_rx_data *bd, u16 len,
u16 pad)
{
- unsigned int offset = bd->page_offset;
+ unsigned int offset = bd->page_offset + pad;
struct skb_frag_struct *frag;
struct page *page = bd->data;
unsigned int pull_len;
@@ -1070,7 +1073,7 @@ static struct sk_buff *qede_rx_allocate_skb(struct qede_dev *edev,
*/
if (len + pad <= edev->rx_copybreak) {
memcpy(skb_put(skb, len),
- page_address(page) + pad + offset, len);
+ page_address(page) + offset, len);
qede_reuse_page(rxq, bd);
goto out;
}
@@ -1078,7 +1081,7 @@ static struct sk_buff *qede_rx_allocate_skb(struct qede_dev *edev,
frag = &skb_shinfo(skb)->frags[0];
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
- page, pad + offset, len, rxq->rx_buf_seg_size);
+ page, offset, len, rxq->rx_buf_seg_size);
va = skb_frag_address(frag);
pull_len = eth_get_headlen(va, QEDE_RX_HDR_SIZE);
@@ -1224,11 +1227,11 @@ static int qede_rx_process_cqe(struct qede_dev *edev,
fp_cqe = &cqe->fast_path_regular;
len = le16_to_cpu(fp_cqe->len_on_first_bd);
- pad = fp_cqe->placement_offset;
+ pad = fp_cqe->placement_offset + rxq->rx_headroom;
/* Run eBPF program if one is attached */
if (xdp_prog)
- if (!qede_rx_xdp(edev, fp, rxq, xdp_prog, bd, fp_cqe))
+ if (!qede_rx_xdp(edev, fp, rxq, xdp_prog, bd, fp_cqe, pad))
return 0;
/* If this is an error packet then drop it */
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index fa62c37..91c3078 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1188,8 +1188,9 @@ static int qede_alloc_mem_rxq(struct qede_dev *edev, struct qede_rx_queue *rxq)
rxq->rx_buf_size = NET_IP_ALIGN + ETH_OVERHEAD + edev->ndev->mtu;
- if (rxq->rx_buf_size > PAGE_SIZE)
- rxq->rx_buf_size = PAGE_SIZE;
+ /* Make sure that the headroom and payload fit in a single page */
+ if (rxq->rx_buf_size + rxq->rx_headroom > PAGE_SIZE)
+ rxq->rx_buf_size = PAGE_SIZE - rxq->rx_headroom;
/* Segment size to spilt a page in multiple equal parts,
* unless XDP is used in which case we'd use the entire page.
--
1.9.3
Powered by blists - more mailing lists