[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170413043916.7793-3-benh@kernel.crashing.org>
Date: Thu, 13 Apr 2017 14:39:09 +1000
From: Benjamin Herrenschmidt <benh@...nel.crashing.org>
To: netdev@...r.kernel.org
Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Subject: [PATCH v2 2/9] ftgmac100: Add pause frames configuration and support
Hopefully my understanding of how the hardware works is correct,
as the documentation isn't completely clear. So far I have seen
no obvious issue. Pause seem to also work with NC-SI.
Signed-off-by: Benjamin Herrenschmidt <benh@...nel.crashing.org>
---
drivers/net/ethernet/faraday/ftgmac100.c | 96 +++++++++++++++++++++++++++++++-
drivers/net/ethernet/faraday/ftgmac100.h | 7 +++
2 files changed, 102 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 66a5065..4be8bf9 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -97,6 +97,11 @@ struct ftgmac100 {
int cur_duplex;
bool use_ncsi;
+ /* Flow control settings */
+ bool tx_pause;
+ bool rx_pause;
+ bool aneg_pause;
+
/* Misc */
bool need_mac_restart;
bool is_aspeed;
@@ -217,6 +222,23 @@ static int ftgmac100_set_mac_addr(struct net_device *dev, void *p)
return 0;
}
+static void ftgmac100_config_pause(struct ftgmac100 *priv)
+{
+ u32 fcr = FTGMAC100_FCR_PAUSE_TIME(16);
+
+ /* Throttle tx queue when receiving pause frames */
+ if (priv->rx_pause)
+ fcr |= FTGMAC100_FCR_FC_EN;
+
+ /* Enables sending pause frames when the RX queue is past a
+ * certain threshold.
+ */
+ if (priv->tx_pause)
+ fcr |= FTGMAC100_FCR_FCTHR_EN;
+
+ iowrite32(fcr, priv->base + FTGMAC100_OFFSET_FCR);
+}
+
static void ftgmac100_init_hw(struct ftgmac100 *priv)
{
u32 reg, rfifo_sz, tfifo_sz;
@@ -910,6 +932,7 @@ static void ftgmac100_adjust_link(struct net_device *netdev)
{
struct ftgmac100 *priv = netdev_priv(netdev);
struct phy_device *phydev = netdev->phydev;
+ bool tx_pause, rx_pause;
int new_speed;
/* We store "no link" as speed 0 */
@@ -918,8 +941,21 @@ static void ftgmac100_adjust_link(struct net_device *netdev)
else
new_speed = phydev->speed;
+ /* Grab pause settings from PHY if configured to do so */
+ if (priv->aneg_pause) {
+ rx_pause = tx_pause = phydev->pause;
+ if (phydev->asym_pause)
+ tx_pause = !rx_pause;
+ } else {
+ rx_pause = priv->rx_pause;
+ tx_pause = priv->tx_pause;
+ }
+
+ /* Link hasn't changed, do nothing */
if (phydev->speed == priv->cur_speed &&
- phydev->duplex == priv->cur_duplex)
+ phydev->duplex == priv->cur_duplex &&
+ rx_pause == priv->rx_pause &&
+ tx_pause == priv->tx_pause)
return;
/* Print status if we have a link or we had one and just lost it,
@@ -930,6 +966,8 @@ static void ftgmac100_adjust_link(struct net_device *netdev)
priv->cur_speed = new_speed;
priv->cur_duplex = phydev->duplex;
+ priv->rx_pause = rx_pause;
+ priv->tx_pause = tx_pause;
/* Link is down, do nothing else */
if (!new_speed)
@@ -961,6 +999,12 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv)
return PTR_ERR(phydev);
}
+ /* Indicate that we support PAUSE frames (see comment in
+ * Documentation/networking/phy.txt)
+ */
+ phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ phydev->advertising = phydev->supported;
+
return 0;
}
@@ -1076,6 +1120,48 @@ static int ftgmac100_set_ringparam(struct net_device *netdev,
return 0;
}
+static void ftgmac100_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct ftgmac100 *priv = netdev_priv(netdev);
+
+ pause->autoneg = priv->aneg_pause;
+ pause->tx_pause = priv->tx_pause;
+ pause->rx_pause = priv->rx_pause;
+}
+
+static int ftgmac100_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct ftgmac100 *priv = netdev_priv(netdev);
+ struct phy_device *phydev = netdev->phydev;
+
+ priv->aneg_pause = pause->autoneg;
+ priv->tx_pause = pause->tx_pause;
+ priv->rx_pause = pause->rx_pause;
+
+ if (phydev) {
+ phydev->advertising &= ~ADVERTISED_Pause;
+ phydev->advertising &= ~ADVERTISED_Asym_Pause;
+
+ if (pause->rx_pause) {
+ phydev->advertising |= ADVERTISED_Pause;
+ phydev->advertising |= ADVERTISED_Asym_Pause;
+ }
+
+ if (pause->tx_pause)
+ phydev->advertising ^= ADVERTISED_Asym_Pause;
+ }
+ if (netif_running(netdev)) {
+ if (phydev && priv->aneg_pause)
+ phy_start_aneg(phydev);
+ else
+ ftgmac100_config_pause(priv);
+ }
+
+ return 0;
+}
+
static const struct ethtool_ops ftgmac100_ethtool_ops = {
.get_drvinfo = ftgmac100_get_drvinfo,
.get_link = ethtool_op_get_link,
@@ -1084,6 +1170,8 @@ static const struct ethtool_ops ftgmac100_ethtool_ops = {
.nway_reset = phy_ethtool_nway_reset,
.get_ringparam = ftgmac100_get_ringparam,
.set_ringparam = ftgmac100_set_ringparam,
+ .get_pauseparam = ftgmac100_get_pauseparam,
+ .set_pauseparam = ftgmac100_set_pauseparam,
};
static irqreturn_t ftgmac100_interrupt(int irq, void *dev_id)
@@ -1215,6 +1303,7 @@ static int ftgmac100_init_all(struct ftgmac100 *priv, bool ignore_alloc_err)
/* Reinit and restart HW */
ftgmac100_init_hw(priv);
+ ftgmac100_config_pause(priv);
ftgmac100_start_hw(priv);
/* Re-enable the device */
@@ -1544,6 +1633,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
netdev->irq = irq;
+ /* Enable pause */
+ priv->tx_pause = true;
+ priv->rx_pause = true;
+ priv->aneg_pause = true;
+
/* MAC address from chip or random one */
ftgmac100_initial_mac(priv);
diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
index 97912c4..0653d81 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.h
+++ b/drivers/net/ethernet/faraday/ftgmac100.h
@@ -199,6 +199,13 @@
#define FTGMAC100_PHYDATA_MIIRDATA(phydata) (((phydata) >> 16) & 0xffff)
/*
+ * Flow control register
+ */
+#define FTGMAC100_FCR_FC_EN (1 << 0)
+#define FTGMAC100_FCR_FCTHR_EN (1 << 2)
+#define FTGMAC100_FCR_PAUSE_TIME(x) (((x) & 0xffff) << 16)
+
+/*
* Transmit descriptor, aligned to 16 bytes
*/
struct ftgmac100_txdes {
--
2.9.3
Powered by blists - more mailing lists