[<prev] [next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqLdeVnYRROmgj37Yh09h9eHtPWT8UhS_uTwjGj2FT2TYQ@mail.gmail.com>
Date: Wed, 19 Apr 2017 15:49:28 -0500
From: Rob Herring <robh@...nel.org>
To: Adam Ford <aford173@...il.com>
Cc: Mark Rutland <mark.rutland@....com>,
Johan Hedberg <johan.hedberg@...il.com>,
Wei Xu <xuwei5@...ilicon.com>, Eyal Reizer <eyalr@...com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"open list:BLUETOOTH DRIVERS" <linux-bluetooth@...r.kernel.org>,
Gustavo Padovan <gustavo@...ovan.org>,
Marcel Holtmann <marcel@...tmann.org>,
Satish Patel <satish.patel@...aro.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
netdev <netdev@...r.kernel.org>
Subject: Re: [PATCH v3 1/4] dt-bindings: net: Add TI WiLink shared transport binding
On Sun, Apr 16, 2017 at 9:09 AM, Adam Ford <aford173@...il.com> wrote:
>
>
> On Apr 13, 2017 10:04 AM, "Rob Herring" <robh@...nel.org> wrote:
>
> Add serial slave device binding for the TI WiLink series of Bluetooth/FM/GPS
> devices.
>
> Signed-off-by: Rob Herring <robh@...nel.org>
> Cc: Mark Rutland <mark.rutland@....com>
> Cc: netdev@...r.kernel.org
> Cc: devicetree@...r.kernel.org
> ---
> v3:
> - rebase on bluetooth-next
>
> .../devicetree/bindings/net/ti,wilink-st.txt | 35
> ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/ti,wilink-st.txt
>
> diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt
> b/Documentation/devicetree/bindings/net/ti,wilink-st.txt
> new file mode 100644
> index 000000000000..cbad73a84ac4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,wilink-st.txt
> @@ -0,0 +1,35 @@
> +TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
> +
> +TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
> +and GPS over what's called "shared transport". The shared transport is
> +standard BT HCI protocol with additional channels for the other functions.
> +
> +These devices also have a separate WiFi interface as described in
> +wireless/ti,wlcore.txt.
> +
> +This bindings follows the UART slave device binding in
> +../serial/slave-device.txt.
> +
> +Required properties:
> + - compatible: should be one of the following:
> + "ti,wl1271-st"
> + "ti,wl1273-st"
> + "ti,wl1831-st"
> + "ti,wl1835-st"
> + "ti,wl1837-st"
> +
>
>
> Would you expect the wl1283 chipset too?
Probably, but I left it out as there's no public information.
> I can help test this if you like after the holiday weekend. I have a board
> with WL1283 and currently using pdata-quirks to support it.
Powered by blists - more mailing lists