[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170421232436.10924-2-icenowy@aosc.io>
Date: Sat, 22 Apr 2017 07:24:33 +0800
From: Icenowy Zheng <icenowy@...c.io>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-sunxi@...glegroups.com, Icenowy Zheng <icenowy@...c.xyz>
Subject: [PATCH 1/4] net: phy: realtek: change macro name for page select register
From: Icenowy Zheng <icenowy@...c.xyz>
The page select register also exists on RTL8211E PHY (although it
behaves slightly differently).
Change the register macro name to remove the F.
Signed-off-by: Icenowy Zheng <icenowy@...c.xyz>
---
drivers/net/phy/realtek.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 9cbe645e3d89..d820d00addf6 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -22,11 +22,13 @@
#define RTL821x_INER 0x12
#define RTL821x_INER_INIT 0x6400
#define RTL821x_INSR 0x13
+
+#define RTL8211_PAGE_SELECT 0x1f
+
#define RTL8211E_INER_LINK_STATUS 0x400
#define RTL8211F_INER_LINK_STATUS 0x0010
#define RTL8211F_INSR 0x1d
-#define RTL8211F_PAGE_SELECT 0x1f
#define RTL8211F_TX_DELAY 0x100
MODULE_DESCRIPTION("Realtek PHY driver");
@@ -46,10 +48,10 @@ static int rtl8211f_ack_interrupt(struct phy_device *phydev)
{
int err;
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0xa43);
+ phy_write(phydev, RTL8211_PAGE_SELECT, 0xa43);
err = phy_read(phydev, RTL8211F_INSR);
/* restore to default page 0 */
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
+ phy_write(phydev, RTL8211_PAGE_SELECT, 0x0);
return (err < 0) ? err : 0;
}
@@ -102,7 +104,7 @@ static int rtl8211f_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08);
+ phy_write(phydev, RTL8211_PAGE_SELECT, 0xd08);
reg = phy_read(phydev, 0x11);
/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
@@ -114,7 +116,7 @@ static int rtl8211f_config_init(struct phy_device *phydev)
phy_write(phydev, 0x11, reg);
/* restore to default page 0 */
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
+ phy_write(phydev, RTL8211_PAGE_SELECT, 0x0);
return 0;
}
--
2.12.2
Powered by blists - more mailing lists