[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170501140133.GD31281@lunn.ch>
Date: Mon, 1 May 2017 16:01:33 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Corentin Labbe <clabbe.montjoie@...il.com>
Cc: robh+dt@...nel.org, mark.rutland@....com,
maxime.ripard@...e-electrons.com, wens@...e.org,
linux@...linux.org.uk, catalin.marinas@....com,
will.deacon@....com, peppe.cavallaro@...com,
alexandre.torgue@...com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
netdev@...r.kernel.org
Subject: Re: [PATCH v5 00/20] net-next: stmmac: add dwmac-sun8i ethernet
driver
On Mon, May 01, 2017 at 02:45:00PM +0200, Corentin Labbe wrote:
> Hello
>
> This patch series add the driver for dwmac-sun8i which handle the Ethernet MAC
> present on Allwinner H3/H5/A83T/A64 SoCs.
>
> This driver is the continuation of the sun8i-emac driver.
> During the development, it appeared that in fact the hardware was a modified
> version of some dwmac.
> So the driver is now written as a glue driver for stmmac.
>
> It supports 10/100/1000 Mbit/s speed with half/full duplex.
> It can use an internal PHY (MII 10/100) or an external PHY
> via RGMII/RMII.
Hi Corentin
Sorry if this has been asked before....
Does the internal PHY have a phy driver? It seems like
tx-delay-ps/rx-delay-ps are properties of this internal PHY, and so
should be in the phy driver, if it has one.
Andrew
Powered by blists - more mailing lists