netdev - [PATCH v4 net-next 00/10] net/ncsi: Add debugging functionality

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1493786681-27468-1-git-send-email-gwshan@linux.vnet.ibm.com>
Date:   Wed,  3 May 2017 14:44:31 +1000
From:   Gavin Shan <gwshan@...ux.vnet.ibm.com>
To:     netdev@...r.kernel.org
Cc:     joe@...ches.com, kubakici@...pl, f.fainelli@...il.com,
        davem@...emloft.net, Gavin Shan <gwshan@...ux.vnet.ibm.com>
Subject: [PATCH v4 net-next 00/10] net/ncsi: Add debugging functionality

This series supports NCSI debugging infrastructure by adding several
ethtool commands and one debugfs file. It was inspired by the reported
issues: No available package and channel are probed successfully.
Obviously, we don't have a debugging infrastructure for NCSI stack yet.

The first 3 patches, fixing some issues, aren't relevant to the
subject. I included them because I expect they can be merged beofre
the code for debugging infrastructure. PATCH[4,5,6,7] adds ethtool
commands to dump NCSI topology, channel information, HW statistics
and SW statistics. PATCH[8] adds debugfs entry /sys/kernel/debug/
ncsi/eth0/pkt, which sends NCSI command packet on write. The NCSI
response packet are dumped on read. PATCH[9,10] fix two issues
found by the debugging functionality.

Changelog
=========
v4:
   * Replace debugfs entries with ethtool commands                   (Dave)
   * Add ethtool commands to dump NCSI topology, channel info and
     HW statistics                                                   (Gavin)
v3:
   * Use pr_debug() instead of pr_warn() upon failure to create
     debugfs directory or file                                       (Joe Perches)
   * Use relative debugfs path/file names in debug messages in
     ncsi-debug.c                                                    (Joe Perches)
   * Use const specifier for @ncsi_pkt_handlers and @ranges          (Joe Perches)
   * Eliminate CONFIG_NET_NCSI_DEBUG ifdef's in *.c                  (Jakub Kicinski)
v2:
   * Use debugfs instead of procfs                                   (Joe Perches)

Gavin Shan (10):
  net/ncsi: Disable HWA mode when no channels are found
  net/ncsi: Properly track channel monitor timer state
  net/ncsi: Enforce failover on link monitor timeout
  net/ncsi: Ethtool operation to get NCSI topology
  net/ncsi: Ethtool operation to get NCSI channel info
  net/ncsi: Ethtool operation to get NCSI hw statistics
  net/ncsi: Ethtool operation to get NCSI sw statistics
  net/ncsi: Support NCSI packet generation
  net/ncsi: No error report on DP response to non-existing package
  net/ncsi: Fix length of GVI response packet

 include/linux/ethtool.h      |   8 +
 include/uapi/linux/ethtool.h | 312 ++++++++++++++++++
 net/core/ethtool.c           | 120 +++++++
 net/ncsi/Kconfig             |   9 +
 net/ncsi/Makefile            |   4 +-
 net/ncsi/internal.h          |  71 ++++
 net/ncsi/ncsi-aen.c          |  14 +-
 net/ncsi/ncsi-cmd.c          |  13 +-
 net/ncsi/ncsi-debug.c        | 759 +++++++++++++++++++++++++++++++++++++++++++
 net/ncsi/ncsi-ethtool.c      | 321 ++++++++++++++++++
 net/ncsi/ncsi-manage.c       |  56 +++-
 net/ncsi/ncsi-rsp.c          |  34 +-
 12 files changed, 1708 insertions(+), 13 deletions(-)
 create mode 100644 net/ncsi/ncsi-debug.c
 create mode 100644 net/ncsi/ncsi-ethtool.c

-- 
2.7.4