lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1494060906-6453-1-git-send-email-ganeshgr@chelsio.com>
Date:   Sat,  6 May 2017 14:25:06 +0530
From:   Ganesh Goudar <ganeshgr@...lsio.com>
To:     netdev@...r.kernel.org, davem@...emloft.net
Cc:     nirranjan@...lsio.com, indranil@...lsio.com,
        Ganesh Goudar <ganeshgr@...lsio.com>
Subject: [PATCH net] cxgb4: avoid disabling FEC by default

Recent Chelsio firmware started using few port capablity bits to
manage FEC and as driver was not aware of FEC changes those bits
were zeroed, consequently disabling FEC.

Avoid zeroing those bits and default to whatever the firmware
tells us the Link is currently advertising.

Signed-off-by: Ganesh Goudar <ganeshgr@...lsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h    |  9 +++++++
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c    | 38 ++++++++++++++++++++++-----
 drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h |  6 ++---
 3 files changed, 43 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 163543b..862e008 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -108,6 +108,12 @@ enum {
 	PAUSE_AUTONEG = 1 << 2
 };
 
+enum {
+	FEC_AUTO      = 1 << 0,	 /* IEEE 802.3 "automatic" */
+	FEC_RS        = 1 << 1,  /* Reed-Solomon */
+	FEC_BASER_RS  = 1 << 2   /* BaseR/Reed-Solomon */
+};
+
 struct port_stats {
 	u64 tx_octets;            /* total # of octets in good frames */
 	u64 tx_frames;            /* all good frames */
@@ -432,6 +438,9 @@ struct link_config {
 	unsigned int   speed;            /* actual link speed */
 	unsigned char  requested_fc;     /* flow control user has requested */
 	unsigned char  fc;               /* actual link flow control */
+	unsigned char  auto_fec;	 /* Forward Error Correction: */
+	unsigned char  requested_fec;	 /* "automatic" (IEEE 802.3), */
+	unsigned char  fec;		 /* requested, and actual in use */
 	unsigned char  autoneg;          /* autonegotiating? */
 	unsigned char  link_ok;          /* link up? */
 	unsigned char  link_down_rc;     /* link down reason */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 0de8eb7..aded42b96 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3707,7 +3707,8 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
 		  struct link_config *lc)
 {
 	struct fw_port_cmd c;
-	unsigned int fc = 0, mdi = FW_PORT_CAP_MDI_V(FW_PORT_CAP_MDI_AUTO);
+	unsigned int mdi = FW_PORT_CAP_MDI_V(FW_PORT_CAP_MDI_AUTO);
+	unsigned int fc = 0, fec = 0, fw_fec = 0;
 
 	lc->link_ok = 0;
 	if (lc->requested_fc & PAUSE_RX)
@@ -3715,6 +3716,13 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
 	if (lc->requested_fc & PAUSE_TX)
 		fc |= FW_PORT_CAP_FC_TX;
 
+	fec = lc->requested_fec & FEC_AUTO ? lc->auto_fec : lc->requested_fec;
+
+	if (fec & FEC_RS)
+		fw_fec |= FW_PORT_CAP_FEC_RS;
+	if (fec & FEC_BASER_RS)
+		fw_fec |= FW_PORT_CAP_FEC_BASER_RS;
+
 	memset(&c, 0, sizeof(c));
 	c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
 				     FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
@@ -3725,13 +3733,15 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
 
 	if (!(lc->supported & FW_PORT_CAP_ANEG)) {
 		c.u.l1cfg.rcap = cpu_to_be32((lc->supported & ADVERT_MASK) |
-					     fc);
+					     fc | fw_fec);
 		lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
 	} else if (lc->autoneg == AUTONEG_DISABLE) {
-		c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc | mdi);
+		c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc |
+					     fw_fec | mdi);
 		lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
 	} else
-		c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc | mdi);
+		c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc |
+					     fw_fec | mdi);
 
 	return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
 }
@@ -7407,13 +7417,26 @@ static void get_pci_mode(struct adapter *adapter, struct pci_params *p)
  *	Initializes the SW state maintained for each link, including the link's
  *	capabilities and default speed/flow-control/autonegotiation settings.
  */
-static void init_link_config(struct link_config *lc, unsigned int caps)
+static void init_link_config(struct link_config *lc, unsigned int pcaps,
+			     unsigned int acaps)
 {
-	lc->supported = caps;
+	lc->supported = pcaps;
 	lc->lp_advertising = 0;
 	lc->requested_speed = 0;
 	lc->speed = 0;
 	lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
+	lc->auto_fec = 0;
+
+	/* For Forward Error Control, we default to whatever the Firmware
+	 * tells us the Link is currently advertising.
+	 */
+	if (acaps & FW_PORT_CAP_FEC_RS)
+		lc->auto_fec |= FEC_RS;
+	if (acaps & FW_PORT_CAP_FEC_BASER_RS)
+		lc->auto_fec |= FEC_BASER_RS;
+	lc->requested_fec = FEC_AUTO;
+	lc->fec = lc->auto_fec;
+
 	if (lc->supported & FW_PORT_CAP_ANEG) {
 		lc->advertising = lc->supported & ADVERT_MASK;
 		lc->autoneg = AUTONEG_ENABLE;
@@ -7991,7 +8014,8 @@ int t4_init_portinfo(struct port_info *pi, int mbox,
 	pi->port_type = FW_PORT_CMD_PTYPE_G(ret);
 	pi->mod_type = FW_PORT_MOD_TYPE_NA;
 
-	init_link_config(&pi->link_cfg, be16_to_cpu(c.u.info.pcap));
+	init_link_config(&pi->link_cfg, be16_to_cpu(c.u.info.pcap),
+			 be16_to_cpu(c.u.info.acap));
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index 8f8c079..251a35e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -2263,9 +2263,9 @@ enum fw_port_cap {
 	FW_PORT_CAP_ANEG		= 0x0100,
 	FW_PORT_CAP_MDIX		= 0x0200,
 	FW_PORT_CAP_MDIAUTO		= 0x0400,
-	FW_PORT_CAP_FEC			= 0x0800,
-	FW_PORT_CAP_TECHKR		= 0x1000,
-	FW_PORT_CAP_TECHKX4		= 0x2000,
+	FW_PORT_CAP_FEC_RS		= 0x0800,
+	FW_PORT_CAP_FEC_BASER_RS	= 0x1000,
+	FW_PORT_CAP_FEC_RESERVED	= 0x2000,
 	FW_PORT_CAP_802_3_PAUSE		= 0x4000,
 	FW_PORT_CAP_802_3_ASM_DIR	= 0x8000,
 };
-- 
2.1.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ