netdev - Re: [PATCH] net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Mon, 08 May 2017 17:33:33 -0400 (EDT)
From:   David Miller <davem@...emloft.net>
To:     grygorii.strashko@...com
Cc:     netdev@...r.kernel.org, nsekhar@...com, ivan.khoronzhuk@...aro.org,
        linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
        spatton@...com
Subject: Re: [PATCH] net: ethernet: ti: cpsw: adjust cpsw fifos depth for
 fullduplex flow control

From: Grygorii Strashko <grygorii.strashko@...com>
Date: Mon, 8 May 2017 14:21:21 -0500

> When users set flow control using ethtool the bits are set properly in the
> CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
> Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
> reset value. When receive flow control is enabled on a port, the port's
> associated FIFO block allocation must be adjusted. The port RX allocation
> must increase to accommodate the flow control runout. The TRM recommends
> numbers of 5 or 6.
> 
> Hence, apply required Port FIFO configuration to
> Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
> interface initialization.
> 
> Cc: Schuyler Patton <spatton@...com>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>

Applied.