lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170508141422.39612-1-andriy.shevchenko@linux.intel.com>
Date:   Mon,  8 May 2017 17:14:18 +0300
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Joao Pinto <Joao.Pinto@...opsys.com>,
        Jan Kiszka <jan.kiszka@...mens.com>,
        netdev <netdev@...r.kernel.org>,
        Giuseppe CAVALLARO <peppe.cavallaro@...com>,
        "David S. Miller" <davem@...emloft.net>
Cc:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v1 0/4] stmmac: pci: Fix crash on Intel Galileo Gen2

Due to misconfiguration of PCI driver for Intel Quark the user will get
a kernel crash:

# udhcpc -i eth0
udhcpc: started, v1.26.2
stmmaceth 0000:00:14.6 eth0: device MAC address 98:4f:ee:05:ac:47
Generic PHY stmmac-a6:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-a6:01, irq=-1)
stmmaceth 0000:00:14.6 eth0: IEEE 1588-2008 Advanced Timestamp supported
stmmaceth 0000:00:14.6 eth0: registered PTP clock
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: sending discover

stmmaceth 0000:00:14.6 eth0: Link is Up - 100Mbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: stmmac_xmit+0xf1/0x1080

Fix this by adding necessary settings.

P.S. I split fix to three patches according to what each of them adds.

Andy Shevchenko (4):
  stmmac: pci: set default number of rx and tx queues
  stmmac: pci: TX and RX queue priority configuration
  stmmac: pci: RX queue routing configuration
  stmmac: pci: split out common_default_data() helper

 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 41 +++++++++++-------------
 1 file changed, 18 insertions(+), 23 deletions(-)

-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ