[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1494337238-1699-1-git-send-email-stefan.wahren@i2se.com>
Date: Tue, 9 May 2017 15:40:38 +0200
From: Stefan Wahren <stefan.wahren@...e.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Stefan Wahren <stefan.wahren@...e.com>
Subject: [PATCH] net: qca_spi: Fix alignment issues in rx path
The qca_spi driver causes alignment issues on ARM devices.
So fix this by using netdev_alloc_skb_ip_align().
Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
---
drivers/net/ethernet/qualcomm/qca_spi.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 513e6c7..24ca7df 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -296,8 +296,9 @@ qcaspi_receive(struct qcaspi *qca)
/* Allocate rx SKB if we don't have one available. */
if (!qca->rx_skb) {
- qca->rx_skb = netdev_alloc_skb(net_dev,
- net_dev->mtu + VLAN_ETH_HLEN);
+ qca->rx_skb = netdev_alloc_skb_ip_align(net_dev,
+ net_dev->mtu +
+ VLAN_ETH_HLEN);
if (!qca->rx_skb) {
netdev_dbg(net_dev, "out of RX resources\n");
qca->stats.out_of_mem++;
@@ -377,7 +378,7 @@ qcaspi_receive(struct qcaspi *qca)
qca->rx_skb, qca->rx_skb->dev);
qca->rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
netif_rx_ni(qca->rx_skb);
- qca->rx_skb = netdev_alloc_skb(net_dev,
+ qca->rx_skb = netdev_alloc_skb_ip_align(net_dev,
net_dev->mtu + VLAN_ETH_HLEN);
if (!qca->rx_skb) {
netdev_dbg(net_dev, "out of RX resources\n");
@@ -759,7 +760,8 @@ qcaspi_netdev_init(struct net_device *dev)
if (!qca->rx_buffer)
return -ENOBUFS;
- qca->rx_skb = netdev_alloc_skb(dev, qca->net_dev->mtu + VLAN_ETH_HLEN);
+ qca->rx_skb = netdev_alloc_skb_ip_align(dev, qca->net_dev->mtu +
+ VLAN_ETH_HLEN);
if (!qca->rx_skb) {
kfree(qca->rx_buffer);
netdev_info(qca->net_dev, "Failed to allocate RX sk_buff.\n");
--
2.1.4
Powered by blists - more mailing lists